01-19-2007, 01:52 AM
Pages: 1 2
01-19-2007, 02:08 AM
I can try and organize another day this spring with DaSilva too. Provided we can get at least 10 guys to make it worth it. Theres a bunch of dynos in the GTA that we can work with. I think the guys at DaSilva always done us good in the past.
01-19-2007, 03:10 AM
hardk0re,Jan 18 2007, 11:08 AM Wrote:I can try and organize another day this spring with DaSilva too. Provided we can get at least 10 guys to make it worth it. Theres a bunch of dynos in the GTA that we can work with. I think the guys at DaSilva always done us good in the past.
[right][snapback]223787[/snapback][/right]
That would be good at least for me because I had the baseline done at DaSilva last time we did a group dyno day there. This was before I started adding things ;) They did see an A/F mix issue at the top end that they indicated they'd be able to fix if I was interested (It was either going way rich or way lean all of a sudden) I'd have to review the dyno sheet to remind myself.
NefCanuck
01-19-2007, 03:31 AM
I'd be interrested also to make a baseline with my St, but I'm way in Ottawa valley.
There seems to be only one dyno shop in Ottawa so I guess come this spring, I'll give them a call and see if they can tune a focus ;)
There seems to be only one dyno shop in Ottawa so I guess come this spring, I'll give them a call and see if they can tune a focus ;)
01-19-2007, 03:42 AM
Gravter,Jan 18 2007, 01:31 PM Wrote:I'd be interrested also to make a baseline with my St, but I'm way in Ottawa valley.
There seems to be only one dyno shop in Ottawa so I guess come this spring, I'll give them a call and see if they can tune a focus ;)
[right][snapback]223797[/snapback][/right]
Theres few of em in ottawa....tapp, Initial, Macco.
They all charge a lot and only 1 has done a focus. ;)
I've sent an email to my guy, we'll see what he has to say.
01-22-2007, 01:19 AM
I'm only 20 minutes further from Ottawa than Toronto, so I'd be up for going in either direction. I've got family in both places, actually.
Put me down for either location.
Put me down for either location.
01-22-2007, 05:09 AM
ok, my guy can do it...
It will probably be ~$65 for 3 runs he said. I would need everything paid upfront though. His shop is about 1/2 hour outside Ottawa.
It will probably be ~$65 for 3 runs he said. I would need everything paid upfront though. His shop is about 1/2 hour outside Ottawa.
01-22-2007, 07:07 AM
Does this shop 30 mins outside of Ottawa do RWD dyno's?
I wanna see if I'm running the average or more for my car (which is anywhere from 255-275ish rwhp depending on factory cam timing and engine management, and of course transmission type)...also curious as to how much torque the engine is putting down...It wouldn't surprise me if it was closer to 300, as at the crank it's supposed to be 320.
Also, after finding out more information, the 4.6L in the S197's were apparently conservatively rated for insurance purposes...they are allegedly between 310-320 hp at the crank, and NOT 300hp.
Maybe there could be a group dyno day around say...march break? Still have cool dry air to get the best results...
I wanna see if I'm running the average or more for my car (which is anywhere from 255-275ish rwhp depending on factory cam timing and engine management, and of course transmission type)...also curious as to how much torque the engine is putting down...It wouldn't surprise me if it was closer to 300, as at the crank it's supposed to be 320.
Also, after finding out more information, the 4.6L in the S197's were apparently conservatively rated for insurance purposes...they are allegedly between 310-320 hp at the crank, and NOT 300hp.
Maybe there could be a group dyno day around say...march break? Still have cool dry air to get the best results...
01-22-2007, 07:27 AM
hes a mustang tuner 1st and foremost. ;)
01-22-2007, 07:37 AM
Flofocus,Jan 21 2007, 02:09 PM Wrote:His shop is about 1/2 hour outside Ottawa.
[right][snapback]224080[/snapback][/right]
Which way? North? East? West?
01-22-2007, 07:40 AM
east
01-22-2007, 08:57 AM
You mean...east of Gloucester?
01-23-2007, 03:09 AM
holy s*** :rolleyes:
East of Ottawa. 1/2 hour east on the 417 towards montreal.
Exit before Embrun.
East of Ottawa. 1/2 hour east on the 417 towards montreal.
Exit before Embrun.
01-27-2007, 11:32 AM
Yeah, but I was meaning that you want me to drive CLOSER to the Province of Quebec? :P
Just kidding! I can see it from the end of my driveway (Ottawa River and the Laurentians are down the street from my house)...
I'm cool with coming down to do a baseline with my car if you get this thing going...
L8tz
Just kidding! I can see it from the end of my driveway (Ottawa River and the Laurentians are down the street from my house)...
I'm cool with coming down to do a baseline with my car if you get this thing going...
L8tz
01-29-2007, 05:29 AM
Chromey,Jan 17 2007, 07:00 PM Wrote:meford4u,Jan 17 2007, 04:59 PM Wrote:^^^^ LMAOChromey,Jan 17 2007, 02:22 PM Wrote:factory freak here...I hope you don't think a new flex will make that much of a difference?
I had 112 at the wheels.
Going for another Dyno after i get a New Flex.
Looking for 140s now.
[right][snapback]223647[/snapback][/right]
Because it won't.
[right][snapback]223665[/snapback][/right]
I have:
SCT 4 bank chip 4 tunes
Header
No-Cat
MBRP Catback
FC UDPs
FC TB
AEM CAI
Cam gear(+2-0)
MSD Ing
Sitting at 138.7
Im looking for more Seat hp from a Flex.
[right][snapback]223682[/snapback][/right]
cai and cat back still with all cats boo 137whp 134tq
01-29-2007, 05:41 AM
^^wait...what mods do u have?
Pages: 1 2