FocusCanada Forums

Whats the stock horse power on the Zetec engine

I think it is 140hp , or 145 hp

Frost__2001,Jan 17 2007, 09:23 AM Wrote:I think it is 140hp , or 145 hp
[right][snapback]223597[/snapback][/right]

keep dreaming :D

130 hp

Mason,Jan 17 2007, 10:22 AM Wrote:Whats the stock horse power on the Zetec engine
[right][snapback]223596[/snapback][/right]

not nearly enough.

ZX5focused,Jan 17 2007, 09:26 AM Wrote:

Frost__2001,Jan 17 2007, 09:23 AM Wrote:I think it is 140hp , or 145 hp
[right][snapback]223597[/snapback][/right]

keep dreaming :D

130 hp
[right][snapback]223599[/snapback][/right]

not even that....to the wheels its like 100-110

NikiterZTS,Jan 17 2007, 10:34 AM Wrote:

ZX5focused,Jan 17 2007, 09:26 AM Wrote:

Frost__2001,Jan 17 2007, 09:23 AM Wrote:I think it is 140hp , or 145 hp
[right][snapback]223597[/snapback][/right]

keep dreaming :D

130 hp
[right][snapback]223599[/snapback][/right]

not even that....to the wheels its like 100-110
[right][snapback]223602[/snapback][/right]

All car manufacturers quote crank hp. Not whp. But yeah your right, the focus puts out about 100-110 whp.

Ats about what I figured

I'm not even sure the Zetec puts out 110whp :huh: Hell the stock Duratec is quoted at 136HP and that only translates into 108whp with an ATX (I have the dyno sheet to prove it)

NefCanuck

NefCanuck,Jan 17 2007, 12:20 PM Wrote:I'm not even sure the Zetec puts out 110whp :huh:  Hell the stock Duratec is quoted at 136HP and that only translates into 108whp with an ATX (I have the dyno sheet to prove it)

NefCanuck
[right][snapback]223625[/snapback][/right]

Some factory freaks will put those #'s down. I know Ive seen 110whp dyno on a stock zetec on FJ.

factory freak here...
I had 112 at the wheels.

Going for another Dyno after i get a New Flex.

Looking for 140s now.

NefCanuck,Jan 17 2007, 11:20 AM Wrote:I'm not even sure the Zetec puts out 110whp :huh:  Hell the stock Duratec is quoted at 136HP and that only translates into 108whp with an ATX (I have the dyno sheet to prove it)

NefCanuck
[right][snapback]223625[/snapback][/right]

That makes me warm and fuzzy... shooting for 130s with the Cossy CAI, MBRP catback and an X-Cal2 reflash.

NOS2Go4Me,Jan 17 2007, 03:15 PM Wrote:

NefCanuck,Jan 17 2007, 11:20 AM Wrote:I'm not even sure the Zetec puts out 110whp :huh:   Hell the stock Duratec is quoted at 136HP and that only translates into 108whp with an ATX (I have the dyno sheet to prove it)

NefCanuck
[right][snapback]223625[/snapback][/right]

That makes me warm and fuzzy... shooting for 130s with the Cossy CAI, MBRP catback and an X-Cal2 reflash.
[right][snapback]223654[/snapback][/right]

Hrm, I haven't done a new dyno with the new bits added (Only thing different from you is no reflash, I'm a little leery of mucking with the ECU while under warranty)

If there was a group dyno day I'd sure like to see but I'm not up to paying full tilt price for a go <_<

NefCanuck

Chromey,Jan 17 2007, 02:22 PM Wrote:factory freak here...
I had 112 at the wheels.

Going for another Dyno after i get a New Flex.

Looking for 140s now.
[right][snapback]223647[/snapback][/right]

I hope you don't think a new flex will make that much of a difference?

Because it won't.

meford4u,Jan 17 2007, 05:59 PM Wrote:

Chromey,Jan 17 2007, 02:22 PM Wrote:factory freak here...
I had 112 at the wheels.

Going for another Dyno after i get a New Flex.

Looking for 140s now.
[right][snapback]223647[/snapback][/right]

I hope you don't think a new flex will make that much of a difference?

Because it won't.
[right][snapback]223665[/snapback][/right]

Pretty sure he got other mods done after the 1st dyno

Chromey,Jan 17 2007, 02:22 PM Wrote:factory freak here...
I had 112 at the wheels.

Going for another Dyno after i get a New Flex.

Looking for 140s now.
[right][snapback]223647[/snapback][/right]

what mods do u have all together?

My SVT put down 148 at the wheels IIRC.

ZX3 - 104 (mtx)

meford4u,Jan 17 2007, 04:59 PM Wrote:

Chromey,Jan 17 2007, 02:22 PM Wrote:factory freak here...
I had 112 at the wheels.

Going for another Dyno after i get a New Flex.

Looking for 140s now.
[right][snapback]223647[/snapback][/right]

I hope you don't think a new flex will make that much of a difference?

Because it won't.
[right][snapback]223665[/snapback][/right]

^^^^ LMAO
I have:
SCT 4 bank chip 4 tunes
Header
No-Cat
MBRP Catback
FC UDPs
FC TB
AEM CAI
Cam gear(+2-0)
MSD Ing

Sitting at 138.7

Im looking for more Seat hp from a Flex.

NefCanuck,Jan 17 2007, 04:55 PM Wrote:

NOS2Go4Me,Jan 17 2007, 03:15 PM Wrote:

NefCanuck,Jan 17 2007, 11:20 AM Wrote:I'm not even sure the Zetec puts out 110whp :huh:  Hell the stock Duratec is quoted at 136HP and that only translates into 108whp with an ATX (I have the dyno sheet to prove it)

NefCanuck
[right][snapback]223625[/snapback][/right]

That makes me warm and fuzzy... shooting for 130s with the Cossy CAI, MBRP catback and an X-Cal2 reflash.
[right][snapback]223654[/snapback][/right]

Hrm, I haven't done a new dyno with the new bits added (Only thing different from you is no reflash, I'm a little leery of mucking with the ECU while under warranty)

If there was a group dyno day I'd sure like to see but I'm not up to paying full tilt price for a go <_<

NefCanuck
[right][snapback]223662[/snapback][/right]

Put me down for a group dyno day, before or after my intake/exhaust are done.

yes i wanna go as well if anyone can actually organise one

if you guys want...I can check with my tuner and see if he would do a dyno day. Maybe he can get some tuning done for some you at the same time.