FocusCanada Forums

Full Version: Down Pipe
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
What size of down pipe would work good with my 2.25" MagnaFlow Exhaust...Im maybe thinking of getting a Borla..put not sure yet or doing a custom exhaust.

What would you guys recommend?
You will NEED to go custom, and go 2.5" for your turbo, The flange thats going to the DP is a unique one for your kit so you will not find a pre made downpipe.

They dont sell 1 of's Downpipes for the focus.
Flofocus,Oct 1 2006, 09:32 AM Wrote:You will NEED to go custom, and go 2.5" for your turbo,  The flange thats going to the DP is a unique one for your kit so you will not find a pre made downpipe.

They dont sell 1 of's Downpipes for the focus.
[right][snapback]209580[/snapback][/right]

Where the heck can I find a pre made DP?
I have 2.25 dp .. it was made custom too.. and 2.5 didn't fit in where it comes out.. the bend just would've been too sharp..

Custom downpipe cost me 40$ to have made when i brought 2 U-bends.. not a huge deal
BerinG,Oct 1 2006, 10:55 AM Wrote:I have 2.25 dp .. it was made custom too.. and 2.5 didn't fit in where it comes out.. the bend just would've been too sharp..

Custom downpipe cost me 40$ to have made when i brought 2 U-bends.. not a huge deal
[right][snapback]209590[/snapback][/right]

Where did you go?
focusonthis_88,Oct 1 2006, 09:35 AM Wrote:
Flofocus,Oct 1 2006, 09:32 AM Wrote:You will NEED to go custom, and go 2.5" for your turbo,  The flange thats going to the DP is a unique one for your kit so you will not find a pre made downpipe.

They dont sell 1 of's Downpipes for the focus.
[right][snapback]209580[/snapback][/right]

Where the heck can I find a pre made DP?
[right][snapback]209581[/snapback][/right]
The DONT make them. You HAVE to get it made custom.
Have you tried Michael at PSI tuning? I know hes super busy though....
Flofocus,Oct 2 2006, 09:46 AM Wrote:Have you tried Michael at PSI tuning?  I know hes super busy though....
[right][snapback]209685[/snapback][/right]

He is really busy...Im only going to do this next year. But I can't afford leaving my car there till he has time to do it like all is other cars. My buddy has a cavalier there since last year and his not done yet... And I don't want to wait a couple of days for a Downpipe. Know what I mean.
I got it done at autoxtrëm ( http://www.autoxtrem.com/) in Gatineau.. they are volkswagen/audi specialists but they did a very good job on my DP.. you do have to leave your car so they can see it and measure for placement, clearance etc.. no need to leave it for a month or anything.. i know its pretty far from you for sure but thats where i had mine done.

People don't make production downpipes caus they are all different.. just think of my setup and flo's for example.. I use the stock manifold for my turbo.. and there's an adapter plate on that for a t25 (any T2X/GT2X should fit), while he's using a mistu, an aftermarket manifold.. placement is always different.. some might want 2.25, some want 2.5 .. its like making a cold air intake for a bunch of cars, it just doesnt work..
id go with Bering's suggestion...and the work they did on his setup is top notch.

Other than that....Id say PM jays200zx3 to find out what hed charge you for it, but remember youd be driving 4 hours to do it. I drive 4 hours cuz i think the man is sexy.
Flofocus,Oct 2 2006, 12:34 PM Wrote:but remember youd be driving 4 hours to do it.  I drive 4 hours cuz i think the man is sexy.
[right][snapback]209704[/snapback][/right]


That would be a good reason to go...
eee.. yeah ill stick with 5 minute drive and not so sexy men hehe..

now if a hot oily chick was making my downpipe..
BerinG,Oct 2 2006, 02:20 PM Wrote:eee.. yeah ill stick with 5 minute drive and not so sexy men hehe..

now if a hot oily chick was making my downpipe..
[right][snapback]209718[/snapback][/right]

Well, your place that you told me is not that far alway so...I'll probably go there next year.
focusonthis_88,Oct 2 2006, 02:48 PM Wrote:
BerinG,Oct 2 2006, 02:20 PM Wrote:eee.. yeah ill stick with 5 minute drive and not so sexy men hehe..

now if a hot oily chick was making my downpipe..
[right][snapback]209718[/snapback][/right]

Well, your place that you told me is not that far alway so...I'll probably go there next year.
[right][snapback]209726[/snapback][/right]

oh really.. i thought you were coming from Rockland.. not that close ;)

well anyway, if you end up going, tell him I mentioned them..they are good guys..

I mean you could call first in case they are super busy or something..(havent talked to them in a while)
BerinG,Oct 2 2006, 03:41 PM Wrote:oh really.. i thought you were coming from Rockland.. not that close ;)

well anyway, if you end up going, tell him I mentioned them..they are good guys..

I mean you could call first in case they are super busy or something..(havent talked to them in a while)
[right][snapback]209744[/snapback][/right]

Well, I work in Ottawa so...Im about 15 minutes from Gatineau so...
focusonthis_88,Oct 2 2006, 04:44 PM Wrote:
BerinG,Oct 2 2006, 03:41 PM Wrote:oh really.. i thought you were coming from Rockland.. not that close ;)

well anyway, if you end up going, tell him I mentioned them..they are good guys..

I mean you could call first in case they are super busy or something..(havent talked to them in a while)
[right][snapback]209744[/snapback][/right]

Well, I work in Ottawa so...Im about 15 minutes from Gatineau so...
[right][snapback]209763[/snapback][/right]

ok ok