Here's My Wednesday Night Project.

Here's My Wednesday Night Project. - Printable Version

+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Regional (//www.focuscanada.net/forum/forumdisplay.php?fid=7)
+--- Forum: Québec (//www.focuscanada.net/forum/forumdisplay.php?fid=38)
+--- Thread: Here's My Wednesday Night Project. (/showthread.php?tid=10421)

Pages: 1 2

Here's My Wednesday Night Project. - mpcv2000 - 03-23-2006

Installing this....

[Image: 33029.jpg]

This should be easy does it... B)

Here's My Wednesday Night Project. - ANTHONYD - 03-23-2006

Nice!

Here's My Wednesday Night Project. - habmann - 03-23-2006

Nice subtle change. Definate improvement over the stock ones.

Here's My Wednesday Night Project. - mpcv2000 - 03-23-2006

I found them on Ebay and I thought it will be a nice add on..

Here's My Wednesday Night Project. - SL8RZZX3 - 03-23-2006

Looking good! can't wait to see pics of them in!

i was lazy and got these a few years back.....

[Image: img78.gif]

pics of them in
[Image: DSC01065.jpg]

not sure if the guy i got them from makes them any more though :(

Here's My Wednesday Night Project. - Flofocus - 03-23-2006

Steeda here....

[Image: DSCF0803.jpg]

Here's My Wednesday Night Project. - mpcv2000 - 03-23-2006

Are they slippery when you feet are wet.. ?

My next buy will be this :

[Image: e5_1_b.JPG]

Ford doesn't make them for the Focus but someone is making a exact copy of the OEM patern and it comes with the braket and hardware .

Here's My Wednesday Night Project. - Flofocus - 03-23-2006

no, the little rubber knobs really help when its wet out.

Here's My Wednesday Night Project. - mpcv2000 - 03-23-2006

Flofocus,Mar 22 2006, 06:54 PM Wrote:no, the little rubber knobs really help when its wet out.
[right][snapback]176457[/snapback][/right]

I sure they thought about it before us.... ;)

Ok time to eat and put these pedals on... :)

Here's My Wednesday Night Project. - SVT ZX3 - 03-23-2006

mpcv2000,Mar 22 2006, 04:35 PM Wrote:Are they slippery when you feet are wet.. ?
[right][snapback]176453[/snapback][/right]

Not too bad, but there is some slipping...

mpcv2000,Mar 22 2006, 04:35 PM Wrote:Ford doesn't make them for the Focus but someone is making a exact copy of the OEM patern and it comes with the braket and hardware .
[right][snapback]176453[/snapback][/right]

Redline Tuning sells this kit, if you look, you will see the dead pedal knobs are a bit more oval compared to the SVT pedals which are exactly round. Not an exact match, but close enough that no one will notice unless you told them.

Here's My Wednesday Night Project. - meford4u - 03-23-2006

After they have been on for a while the rubber fades away and slppery peadle is definately what you get. Just think about replacing them every 50,000 kms.

Here's My Wednesday Night Project. - mpcv2000 - 03-23-2006

....Still working on it but I'm done for tonight..

I did the same thing in my Mustang and it was a pain...but now since I know , it's a bigger pain...I don't know if any of you did the SVT pedal thing but you need a lot of patience.

Stock looking....bah... :

[Image: 33135.jpg]

after a lot of fighting they went it..... :angry:

[Image: 33136.jpg]

For the gaz pedal I have to remove 3 nuts and I need a long 10mm 1/4 drive socket that I don't have so tomorrow is socket shopping.

[Image: 33138.jpg]

To give me more room while messing with the gaz pedal I "zipptied" the throttle body wide open to free up some throttle cable including my own safety feature...just in case... ;)

[Image: 33137.jpg]

Here's My Wednesday Night Project. - 01-yellow-ZX3 - 03-23-2006

Flofocus,Mar 22 2006, 04:30 PM Wrote:Steeda here....

[right][snapback]176451[/snapback][/right]

Hey, did I ever tell you those were upside down? :P :P

Here's My Wednesday Night Project. - mpcv2000 - 03-24-2006

Done. All I needed was the 10mm long socket.

Looks good , I like it. Now my car will go faster... :P

[Image: 33621.jpg]

Here's My Wednesday Night Project. - habmann - 03-24-2006

Looks good, maybe i'll get a set to replace the steeda ones i have right now.

Here's My Wednesday Night Project. - dBlast - 03-24-2006

01-yellow-ZX3,Mar 22 2006 Wrote:
Flofocus,Mar 22 2006, 04:30 PM Wrote:Steeda here....

[right][snapback]176451[/snapback][/right]

Hey, did I ever tell you those were upside down? :P :P
[right][snapback]176515[/snapback][/right]

That's the way mine are installed as well (installed by Steeda while they were doing other stuff there.)

That's the way they are oriented on their web site as well:

[Image: 706_m.gif]

:iono:

Here's My Wednesday Night Project. - darkpuppet - 03-25-2006

mpcv2000,Mar 22 2006, 08:25 PM Wrote:

[right][snapback]176484[/snapback][/right]

get a grommet on that power cable!!!

Here's My Wednesday Night Project. - mpcv2000 - 03-25-2006

darkpuppet,Mar 24 2006, 12:24 PM Wrote:get a grommet on that power cable!!!
[right][snapback]176742[/snapback][/right]

From this side you can't see but I have some loom going thru the fire wall , I know it's not a grommet but it's all I had back then.

[Image: 33972.jpg]

Here's My Wednesday Night Project. - Flofocus - 03-28-2006

01-yellow-ZX3,Mar 22 2006 Wrote:Hey, did I ever tell you those were upside down?  :P  :P
[right][snapback]176515[/snapback][/right]

They aren't. :P

Here's My Wednesday Night Project. - euro - 04-11-2006

SVT pedal kit is really nice and sheap. I'll do mine next summer, right now I need horse power.