+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Technobabble (//www.focuscanada.net/forum/forumdisplay.php?fid=4)
+--- Forum: Focus on Appearance (//www.focuscanada.net/forum/forumdisplay.php?fid=21)
+--- Thread: Cutting Stock Shifter (/showthread.php?tid=15898)
Cutting Stock Shifter - MAlby7 - 02-27-2005
Hey I put this in appearance mods because I know cutting it won't change the throw of the shifter. I bought a shift knob that has the same shape as the one below which makes the shifter a little taller. For those of you who cut your stock shifters down to make it a short shifter, how much did you cut off?
![[Image: TK501BL.jpg]](http://www.toucanindustries.com/clientuploads/big_products/TK501BL.jpg)
Cutting Stock Shifter - DD1 - 02-27-2005
i would use a hack saw and some whore s teeth
Cutting Stock Shifter - MAlby7 - 02-27-2005
DD1,Feb 26 2005, 08:44 PM Wrote:i would use a hack saw and some whore s teeth
[right][snapback]89552[/snapback][/right]
And this has to do what with how much length I should cut off LOL?
Cutting Stock Shifter - 01-yellow-ZX3 - 02-27-2005
I received a momo shift knob for a present, and mounted it to the stock shifter. It was like rowing a freaking boat! :o
It was wayyy to tall to be comfortable. I cut a bit over 2" off with a hacksaw with the help of a buddy holding the shifter base. I put a bag over the top of the shifter to catch the shavings. A dremel would do a nice job also, but the sparks on the dash and seats might be a no-no.
Cutting Stock Shifter - Chromey - 02-28-2005
I cut 2.5"off, Looks and feels alot better.
Alot of after market shift knobs do not have thread, They have the 3 set screws. If you dont need to retap it dont, If you do, 1/4 20 dye will work great.
Cutting Stock Shifter - MAlby7 - 02-28-2005
Chromey,Feb 27 2005, 10:31 AM Wrote:I cut 2.5"off, Looks and feels alot better.
Alot of after market shift knobs do not have thread, They have the 3 set screws. If you dont need to retap it dont, If you do, 1/4 20 dye will work great.
[right][snapback]89765[/snapback][/right]
No I have one with the set screws. Ummmm after you cut the 2.5" off was it any harder to shift? Do you have a picture by any chance?
Cutting Stock Shifter - Chromey - 02-28-2005
Ill take a picture for ya... It seemed harder for the first few days, I guess i got use to it Cause i dont remember it now.
![[Image: IMG_1111.jpg]](http://img.photobucket.com/albums/v333/Chromey316/Focus%20Pics/IMG_1111.jpg)
![[Image: IMG_1112.jpg]](http://img.photobucket.com/albums/v333/Chromey316/Focus%20Pics/IMG_1112.jpg)
![[Image: IMG_0017.jpg]](http://img.photobucket.com/albums/v333/Chromey316/Focus%20Pics/IMG_0017.jpg)
Cutting Stock Shifter - french_connection - 02-28-2005
MAlby7,Feb 27 2005, 01:11 AM Wrote:DD1,Feb 26 2005, 08:44 PM Wrote:i would use a hack saw and some whore s teeth
[right][snapback]89552[/snapback][/right]
And this has to do what with how much length I should cut off LOL?
[right][snapback]89580[/snapback][/right]
easy, let the whore mouth go down on the shifter, when she start gagging, thats where you have to cut...
Be prepared to cut the exaust if the whore is good cuz she wont gag.... :lol:
Cutting Stock Shifter - 01-yellow-ZX3 - 03-01-2005
If I were you Malby, I'd cut off 2", and set your new knob on, and see what you think. If you want to be cautious make it 1 3/4". And just go from there.
Cutting Stock Shifter - ZX3TUNR - 03-01-2005
me and jarrod both got cut shifters. turned out super good.
Cutting Stock Shifter - S2 - 03-02-2005
For the price, why not go with a STS. Hacking the shifter shaft is pretty ghetto IMO...... it works but it's a little to close to the 'riceline' for me.
Cutting Stock Shifter - MAlby7 - 03-02-2005
S2,Mar 1 2005, 10:36 AM Wrote:For the price, why not go with a STS. Hacking the shifter shaft is pretty ghetto IMO...... it works but it's a little to close to the 'riceline' for me.
[right][snapback]90451[/snapback][/right]
Well lets put it this way. The $160 I save on a STS I can buy a new pair of Nike Shox that I wanted. When you make $70 a week like I do right now you need to save as much as possible.
Cutting Stock Shifter - ZX3TUNR - 03-02-2005
S2,Mar 1 2005, 07:36 AM Wrote:For the price, why not go with a STS. Hacking the shifter shaft is pretty ghetto IMO...... it works but it's a little to close to the 'riceline' for me.
[right][snapback]90451[/snapback][/right]
Chad if you look at both mine and Jarrods shift knobs they look pro. Even the cut looks pro. Very far from looking ghetto at all. No one would ever know.
I drove a focus with a actual short shifter and did I find a differene. Sure didnt.
Its just one of those useless mods where companys can make easy money. Its not going to make some one shift any faster. They are either a good shifter or a shitty shifter.
Even with an actual short shifter there still going to be slow if the driver sucks. No point. Best to use the $70 or $100 for a mod that actual gives you more power. In the mean time cut the shifter and keep practicing.
SR20DET (chris) is one of the fastest shifters I know in Regina. Even the hot rods guys are amazed how fast this kid shifts. He's running on a cut shifter to.
Cutting Stock Shifter - S2 - 03-02-2005
Oh yeah guys I ain't bashing you, I've seen the ones you guys did, awesome stuff. I was just making a point that I prefer to have the REAL thing and not just make it. That's all, no disrespect.
Cutting Stock Shifter - MAlby7 - 03-02-2005
S2,Mar 1 2005, 08:33 PM Wrote:Oh yeah guys I ain't bashing you, I've seen the ones you guys did, awesome stuff. I was just making a point that I prefer to have the REAL thing and not just make it. That's all, no disrespect.
[right][snapback]90611[/snapback][/right]
None taken. Just can't afford stupid s**t now!
Cutting Stock Shifter - ZX3TUNR - 03-02-2005
Mike you need super charger :D go big or go home :D lol :P
j/k
SUPER CHARGER. Sleep on it bro. ;)
Cutting Stock Shifter - MAlby7 - 03-02-2005
ZX3TUNR,Mar 1 2005, 08:41 PM Wrote:Mike you need super charger :D go big or go home :D lol :P
j/k
SUPER CHARGER. Sleep on it bro. ;)
[right][snapback]90617[/snapback][/right]
I guess home is my next destination!
Cutting Stock Shifter - ZX3TUNR - 03-02-2005
super charger :D then your car will be done...
Cutting Stock Shifter - ZX5focused - 03-03-2005
ZX3TUNR,Mar 1 2005, 08:06 PM Wrote:super charger :D then your car will be done...
[right][snapback]90636[/snapback][/right]
u turn into a spokemsan now jay?,
lol pushing s/c on everybody??
jk man anyone wiht boost gets my respcet! :P