To Those Who Dyno-ed Their Cars Today At Dasilva..

To Those Who Dyno-ed Their Cars Today At Dasilva.. - Printable Version

+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Canadian Focus Community (//www.focuscanada.net/forum/forumdisplay.php?fid=3)
+--- Forum: Focus Talk (//www.focuscanada.net/forum/forumdisplay.php?fid=18)
+--- Thread: To Those Who Dyno-ed Their Cars Today At Dasilva.. (/showthread.php?tid=17615)

Pages: 1 2

To Those Who Dyno-ed Their Cars Today At Dasilva.. - GapBoyPCS - 05-16-2004

For all participants today, please email me the following:

- max hp
- max torque
- mods you've done

I want to compile a listing as an informal gauge. Between the folks that have dynoed their cars today, we probably have a good cross-section of what minor modding will get.

(Don't worry, we won't use your real name B) )

Again, thanks to everyone who came out. Thanks especially go to Diego, Murray, Joe, and the entire crew at DaSilva Racing.

To Those Who Dyno-ed Their Cars Today At Dasilva.. - hardk0re - 05-16-2004

I'll just post mine for the whole world to see ;)

<a href='http://images.cardomain.com/member_images/8/web/572000-572999/572202_11_full.jpg'> [Image: 572202_11_full.jpg]

</a>

Car:
2001 Ford Focus ZX3 @ 82000km

Engine Mods:
- AEM Cold Air Intake
- Diablo Performance Chip
- Ford Racing Short Header
- Focus Central HighFlow Cat
- Bosal Flexpipe
- Brullen Cat-Back Exhaust
- Screamin Deamon Ignition Coil
- Livewires Performance Ignition Wires
- Focussport Underdrive Pulley

To Those Who Dyno-ed Their Cars Today At Dasilva.. - scoobasteve - 05-16-2004

gah! my dyno sheets in the car.... did anyone notice/think that the numbers were a bit low ?

To Those Who Dyno-ed Their Cars Today At Dasilva.. - BonezGT - 05-16-2004

Yeah...lots of the mustang guys were saying the same thing. We had dyno weekend last weekend at Dasilva's. The dyno numbers seemed a bit low. :blink:

To Those Who Dyno-ed Their Cars Today At Dasilva.. - D-Dub - 05-16-2004

hardk0re/s2,May 15 2004, 09:16 PM Wrote:I'll just post mine for the whole world to see ;)

<a href='http://images.cardomain.com/member_images/8/web/572000-572999/572202_11_full.jpg'><a href='http://images.cardomain.com/member_images/8/web/572000-572999/572202_11_full.jpg'></a></a>

Car:
2001 Ford Focus ZX3 @ 82000km

Engine Mods:
- AEM Cold Air Intake
- Diablo Performance Chip
- Ford Racing Short Header
- Focus Central HighFlow Cat
- Bosal Flexpipe
- Brullen Cat-Back Exhaust
- Screamin Deamon Ignition Coil
- Livewires Performance Ignition Wires
- Focussport Underdrive Pulley

Um those numbers are really low for the mods you have listed I think you should be in the 124whp range

To Those Who Dyno-ed Their Cars Today At Dasilva.. - Focus Is Art - 05-16-2004

Here is mine, I am abit upset w/ my #, anyway

<a href='http://www.imagestation.com/picture/sraid116/peb8c9d5f81f742545c0465071103277d/f8a85d65.jpg'></a>

2k ZX3(2k Jan build), 5speed
FC UPD
Cat back w/ add on resonator
iceman
colder plug
ported TB

:( :( :(

PS for some reason, it won't pick up my pic from imagestation, can someone help me out?

link here
<a href='http://www.imagestation.com/picture/sraid116/peb8c9d5f81f742545c0465071103277d/f8a85d65.jpg' target='_blank'>Dyno

To Those Who Dyno-ed Their Cars Today At Dasilva.. - Focus Is Art - 05-16-2004

The only good thing is I have max tq at 2500rpm :blink: :angry:

To Those Who Dyno-ed Their Cars Today At Dasilva.. - Euro Ford Fan - 05-16-2004

That is low my Focus made more power than that stock. Hmmmm you guys pulled in 4th right?

To Those Who Dyno-ed Their Cars Today At Dasilva.. - naz - 05-17-2004

just IMHO, dynos should be used to compare before mods and after mods, and also to assure stuff like injector duty cycle and A/F are good and safe.

you guys shouldn't be getting hung up over peak power #s

To Those Who Dyno-ed Their Cars Today At Dasilva.. - Focus Is Art - 05-17-2004

Euro Ford Fan,May 16 2004, 11:11 AM Wrote:That is low my Focus made more power than that stock. Hmmmm you guys pulled in 4th right?

Whats will be the diff between 3rd and 4th?

To Those Who Dyno-ed Their Cars Today At Dasilva.. - hardk0re - 05-17-2004

D-Dub,May 16 2004, 07:16 AM Wrote:Um those numbers are really low for the mods you have listed I think you should be in the 124whp range

I think the numbers are a little low for everybody, but at least I have a starting point.

To Those Who Dyno-ed Their Cars Today At Dasilva.. - scoobasteve - 05-17-2004

someone wanna host my dyno for me ? i funno how to do it myself.

To Those Who Dyno-ed Their Cars Today At Dasilva.. - hardk0re - 05-17-2004

scoobasteve's dyno:
<a href='http://members.rogers.com/i.hate.rogers/Focus/scoobastevedyno.jpg'> [Image: scoobastevedyno.jpg]

</a>

To Those Who Dyno-ed Their Cars Today At Dasilva.. - Paparoach - 05-17-2004

Euro Ford Fan,May 16 2004, 07:11 AM Wrote:That is low my Focus made more power than that stock. Hmmmm you guys pulled in 4th right?

Yeah that does seem very very low....

To Those Who Dyno-ed Their Cars Today At Dasilva.. - scoobasteve - 05-17-2004

ill post it again....

<a href='http://members.rogers.com/i.hate.rogers/Focus/scoobastevedyno.jpg'> [Image: scoobastevedyno.jpg]

</a>
2003 SVTZX5
Custom intake
MBRP catback
Steeda SS
Royal Purple Synthetic
11700km.

Thanks to hardk0re/s2 for hosting :D

To Those Who Dyno-ed Their Cars Today At Dasilva.. - bluetoy - 05-17-2004

I agree the Dyno was a little low...

2002 SVT Focus
JRSC
K&N cone filter.
Quaker State Synthetic 5w30
Motorsport plug wires
One step colder Ford plugs gapped at .040
32,000 km's

<a href='http://members.rogers.com/rthoma2552/Dyno1.jpg'> [Image: Dyno1.jpg]

</a>

Ignore the spike in the torque. They were having trouble picking up spark and when the tach cut out briefly the torque went up a little... :rolleyes:

To Those Who Dyno-ed Their Cars Today At Dasilva.. - GapBoyPCS - 05-17-2004

Focus Is Art's numbers:

<a href='http://www.imagestation.com/picture/sraid116/peb8c9d5f81f742545c0465071103277d/f8a85d65.jpg'> [Image: f8a85d65.jpg]

</a>

2k ZX3(2k Jan build), 5speed
FC UPD
Cat back w/ add on resonator
iceman
colder plug
ported TB

Let's see if that works :) (You used the http thing instead of IMG)

To Those Who Dyno-ed Their Cars Today At Dasilva.. - bluetoy - 05-17-2004

Almost forgot this video it is 8.5 megs..

To Those Who Dyno-ed Their Cars Today At Dasilva.. - GapBoyPCS - 05-17-2004

2002 ZTS Automatic w/ 155,000 km
- Ford Racing underdrive pulley
- K&N drop-in air filter element

<a href='http://www3.sympatico.ca/richard.lee5/imgs4boards/dyno.jpg'> [Image: dyno.jpg]

</a>

On average:
- 100.56 hp @ 5,250 rpm
- 104.92 lb ft @ 4,700 rpm

From what I've read, that's about on-par. However, seeing how I've got that much miles on the car...dang! I really thought mileage would have reduced the numbers.

Out of everyone that dyno-ed, I was pretty much stock Zetec configuration. Still, if the numbers were underrated, then I may have been a bit higher by about a pony or two.

No wonder everyone has their own views of dynos :rolleyes:

To Those Who Dyno-ed Their Cars Today At Dasilva.. - Flofocus - 05-17-2004

nevermind