FocusCanada Forums
clunking noise in front of focus - Printable Version

+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Canadian Focus Community (//www.focuscanada.net/forum/forumdisplay.php?fid=3)
+--- Forum: Focus Talk (//www.focuscanada.net/forum/forumdisplay.php?fid=18)
+--- Thread: clunking noise in front of focus (/showthread.php?tid=19660)



clunking noise in front of focus - mustanggt_50 - 11-26-2011

Just wondering if I can get some input. The focus has a slight clunk in what seems to be the passenger side front. I had a similar sound 3 years ago and it was the stabilizer links that needed replaced so I did the same this time and while the links were in rough shape, it did not cure the problem. I have checked everything with a pry bar, the ball joints and tie rods are tight. The only thing I could get to move was the rear bushing area in the control arm on the passenger side, the drivers side was tight. Is this something that is a problem area on the Focus? Could it cause a clunking noise similar to the stabilizer links going? Anywhere else I should check?


RE: clunking noise in front of focus - moon111 - 11-26-2011

Nothing bent? Make a difference in the speed of vehicle or rpm of engine?


RE: clunking noise in front of focus - mustanggt_50 - 11-26-2011

Nope, nothing is bent. Haven't hit anything. The noise just developed over the last few days. Its a lot more noticeable at slow speeds, if I am cruising at 50kph I cannot notice the noise. Also it does not matter if I am turning left or right, going forwards or backwards.


RE: clunking noise in front of focus - Focus man. Focus. - 11-26-2011

Which side? ...... Wheel bearing?

Probably?????


RE: clunking noise in front of focus - mustanggt_50 - 11-26-2011

Passenger side. I changed the wheel bearing 3 months ago.


RE: clunking noise in front of focus - moon111 - 11-27-2011

Maybe it is that rear bushing in the control arm?


RE: clunking noise in front of focus - mustanggt_50 - 11-27-2011

Could be. I was hoping someone else might have had a similar problem and had a fix. Could a strut bearing cause a clunking noise?


RE: clunking noise in front of focus - Mystake - 11-27-2011

I have(had?) a clunk that I sometimes hear when I am turning the steering wheel, specifically at times like when parallel parking. I haven't heard it recently but after having taken a look at it at the time with my mech it seemed most likely to be a strut bearing.




RE: clunking noise in front of focus - mustanggt_50 - 11-27-2011

Ok, I will take a closer look at that portion of the vehicle. It doesn't take long to take the strut out so might be worth while to check it out. Thanks.


RE: clunking noise in front of focus - Mystake - 11-27-2011

well we didn't even take the strut out, we simply turned the wheel and there was a slight 'click' noise that could be heard. figured that it wasn't louder due to there being no weight on it so the diagnosis isn't a very thorough one (that wasn't what the car was in for)


RE: clunking noise in front of focus - mustanggt_50 - 11-27-2011

Hmmm, well when I do a dry turn, whether on the ground or jacked up there is no noise whatsoever. The only time the noise comes is when mobile. Maybe that rear bushing is the problem. I can always change it out and see. Thanks.