+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Technobabble (//www.focuscanada.net/forum/forumdisplay.php?fid=4)
+--- Forum: Focus on Appearance (//www.focuscanada.net/forum/forumdisplay.php?fid=21)
+--- Thread: Grille (/showthread.php?tid=4828)
Grille - snorcus - 08-31-2007
So I got bored the other night and decided to spray my grille. The black part separated from the chrome very easily and the paint stuck to it well. Just a very easy mod for someone with an 05-07
![[Image: 100_2892.jpg]](http://i159.photobucket.com/albums/t159/snorcus/100_2892.jpg)
![[Image: 100_2891.jpg]](http://i159.photobucket.com/albums/t159/snorcus/100_2891.jpg)
Grille - NOS2Go4Me - 08-31-2007
Nice work!
Grille - NefCanuck - 09-01-2007
Very nice indeed :blink:
Now if I had any skill in painting that would be a project to tackle...
NefCanuck
Grille - Canadian ST - 09-03-2007
Wow thats sharp, looks factory only better. I saw a 07 hatch with the inside of his headlights painted black man it looked very mean. :ph34r: I want to find out how to do that
Grille - konafocuswrc - 09-03-2007
putting in oven or other method to open headlights and few screws holding inside bezel, take that out, sand lightly, primer, base coat..let it dry, reassemble silicone to seal it back..
but be careful with oven method, tab melts under lower temp than other parts..
it is all about patient.
Grille - Frost__2001 - 09-04-2007
dosen't look that bad, the crome surround looks sharpe on it.
Grille - ZTWsquared - 09-04-2007
That looks good - nice job. How did you get the black part off the chrome part without destroying those little tabs?
snorcus,Aug 31 2007, 09:04 AM Wrote:The black part separated from the chrome very easily and the paint stuck to it well. [right][snapback]248048[/snapback][/right]
Grille - zx5power - 09-04-2007
ive looked at the back of mine and it seems just like taking your time will get it out .... the headlights there is a how to on focusfanatics i may post it here .... im thinking of doing it .
Grille - snorcus - 09-04-2007
To get it separated you just need a sharp knife and a little patience. It only took a few min to get it appart. There are little tabs holding the clips tight, just slice those off and then the clips will be able to move. Dont wory it still holds tight.