Replaced Engine, Cooland Hose Problem! - Printable Version +- FocusCanada Forums (//www.focuscanada.net/forum) +-- Forum: Technobabble (//www.focuscanada.net/forum/forumdisplay.php?fid=4) +--- Forum: The Basics (//www.focuscanada.net/forum/forumdisplay.php?fid=25) +--- Thread: Replaced Engine, Cooland Hose Problem! (/showthread.php?tid=5029) |
Replaced Engine, Cooland Hose Problem! - howie321 - 08-04-2007 i replaced the engine in my focus, i have a crappy little quick sketch i need someone to look at please, i have 3 hose spots, but 4 hose ends??!?!?! the #3 and #2 i forgot to put on but i think thats where they need to be?! please help.. thanks ![]() Replaced Engine, Cooland Hose Problem! - Flofocus - 08-04-2007 spi engine, so really not sure, but on the zetec and off the top of my head... -one goes to the water pump -4 go to the coolant (small hoses) -Thermostat housing, think theyres one main and another small one... -Rad, I think has 3 hoses going to it Thats off the top of my head so check those... Replaced Engine, Cooland Hose Problem! - howie321 - 08-04-2007 k, i only have 3 from the coolant, and i have 2 from the water pump. I have one hose that splits into 2 hoses, thats where im most confused Replaced Engine, Cooland Hose Problem! - Flofocus - 08-04-2007 howie321,Aug 3 2007, 03:50 PM Wrote:k, i only have 3 from the coolant, and i have 2 from the water pump.what about the thermostat housing? Replaced Engine, Cooland Hose Problem! - howie321 - 08-04-2007 i has 3, the rad, one i dont know where it goes, than another that goes to the rear of the motor, didnt take that one off tho im certain of that one |