+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Canadian Focus Community (//www.focuscanada.net/forum/forumdisplay.php?fid=3)
+--- Forum: Focus Talk (//www.focuscanada.net/forum/forumdisplay.php?fid=18)
+--- Thread: Horse Power (/showthread.php?tid=6902)
Pages:
1
2
Horse Power - Mason - 01-18-2007
Whats the stock horse power on the Zetec engine
Horse Power - Frost__2001 - 01-18-2007
I think it is 140hp , or 145 hp
Horse Power - ZX5focused - 01-18-2007
Frost__2001,Jan 17 2007, 09:23 AM Wrote:I think it is 140hp , or 145 hp
[right][snapback]223597[/snapback][/right]
keep dreaming :D
130 hp
Horse Power - ANTHONYD - 01-18-2007
Mason,Jan 17 2007, 10:22 AM Wrote:Whats the stock horse power on the Zetec engine
[right][snapback]223596[/snapback][/right]
not nearly enough.
Horse Power - NikiterZTS - 01-18-2007
ZX5focused,Jan 17 2007, 09:26 AM Wrote:Frost__2001,Jan 17 2007, 09:23 AM Wrote:I think it is 140hp , or 145 hp
[right][snapback]223597[/snapback][/right]
keep dreaming :D
130 hp
[right][snapback]223599[/snapback][/right]
not even that....to the wheels its like 100-110
Horse Power - Flofocus - 01-18-2007
NikiterZTS,Jan 17 2007, 10:34 AM Wrote:All car manufacturers quote crank hp. Not whp. But yeah your right, the focus puts out about 100-110 whp.ZX5focused,Jan 17 2007, 09:26 AM Wrote:Frost__2001,Jan 17 2007, 09:23 AM Wrote:I think it is 140hp , or 145 hp
[right][snapback]223597[/snapback][/right]
keep dreaming :D
130 hp
[right][snapback]223599[/snapback][/right]
not even that....to the wheels its like 100-110
[right][snapback]223602[/snapback][/right]
Horse Power - Mason - 01-18-2007
Ats about what I figured
Horse Power - NefCanuck - 01-18-2007
I'm not even sure the Zetec puts out 110whp :huh: Hell the stock Duratec is quoted at 136HP and that only translates into 108whp with an ATX (I have the dyno sheet to prove it)
NefCanuck
Horse Power - Flofocus - 01-18-2007
NefCanuck,Jan 17 2007, 12:20 PM Wrote:I'm not even sure the Zetec puts out 110whp :huh: Hell the stock Duratec is quoted at 136HP and that only translates into 108whp with an ATX (I have the dyno sheet to prove it)
NefCanuck
[right][snapback]223625[/snapback][/right]
Some factory freaks will put those #'s down. I know Ive seen 110whp dyno on a stock zetec on FJ.
Horse Power - Chromey - 01-18-2007
factory freak here...
I had 112 at the wheels.
Going for another Dyno after i get a New Flex.
Looking for 140s now.
Horse Power - NOS2Go4Me - 01-18-2007
NefCanuck,Jan 17 2007, 11:20 AM Wrote:I'm not even sure the Zetec puts out 110whp :huh: Hell the stock Duratec is quoted at 136HP and that only translates into 108whp with an ATX (I have the dyno sheet to prove it)
NefCanuck
[right][snapback]223625[/snapback][/right]
That makes me warm and fuzzy... shooting for 130s with the Cossy CAI, MBRP catback and an X-Cal2 reflash.
Horse Power - NefCanuck - 01-18-2007
NOS2Go4Me,Jan 17 2007, 03:15 PM Wrote:NefCanuck,Jan 17 2007, 11:20 AM Wrote:I'm not even sure the Zetec puts out 110whp :huh:ÃÂ Hell the stock Duratec is quoted at 136HP and that only translates into 108whp with an ATX (I have the dyno sheet to prove it)
NefCanuck
[right][snapback]223625[/snapback][/right]
That makes me warm and fuzzy... shooting for 130s with the Cossy CAI, MBRP catback and an X-Cal2 reflash.
[right][snapback]223654[/snapback][/right]
Hrm, I haven't done a new dyno with the new bits added (Only thing different from you is no reflash, I'm a little leery of mucking with the ECU while under warranty)
If there was a group dyno day I'd sure like to see but I'm not up to paying full tilt price for a go <_<
NefCanuck
Horse Power - meford4u - 01-18-2007
Chromey,Jan 17 2007, 02:22 PM Wrote:factory freak here...I hope you don't think a new flex will make that much of a difference?
I had 112 at the wheels.
Going for another Dyno after i get a New Flex.
Looking for 140s now.
[right][snapback]223647[/snapback][/right]
Because it won't.
Horse Power - Flofocus - 01-18-2007
meford4u,Jan 17 2007, 05:59 PM Wrote:Chromey,Jan 17 2007, 02:22 PM Wrote:factory freak here...I hope you don't think a new flex will make that much of a difference?
I had 112 at the wheels.
Going for another Dyno after i get a New Flex.
Looking for 140s now.
[right][snapback]223647[/snapback][/right]
Because it won't.
[right][snapback]223665[/snapback][/right]
Pretty sure he got other mods done after the 1st dyno
Horse Power - NikiterZTS - 01-18-2007
Chromey,Jan 17 2007, 02:22 PM Wrote:factory freak here...
I had 112 at the wheels.
Going for another Dyno after i get a New Flex.
Looking for 140s now.
[right][snapback]223647[/snapback][/right]
what mods do u have all together?
Horse Power - scoobasteve - 01-18-2007
My SVT put down 148 at the wheels IIRC.
ZX3 - 104 (mtx)
Horse Power - Chromey - 01-18-2007
meford4u,Jan 17 2007, 04:59 PM Wrote:^^^^ LMAOChromey,Jan 17 2007, 02:22 PM Wrote:factory freak here...I hope you don't think a new flex will make that much of a difference?
I had 112 at the wheels.
Going for another Dyno after i get a New Flex.
Looking for 140s now.
[right][snapback]223647[/snapback][/right]
Because it won't.
[right][snapback]223665[/snapback][/right]
I have:
SCT 4 bank chip 4 tunes
Header
No-Cat
MBRP Catback
FC UDPs
FC TB
AEM CAI
Cam gear(+2-0)
MSD Ing
Sitting at 138.7
Im looking for more Seat hp from a Flex.
Horse Power - NOS2Go4Me - 01-18-2007
NefCanuck,Jan 17 2007, 04:55 PM Wrote:NOS2Go4Me,Jan 17 2007, 03:15 PM Wrote:NefCanuck,Jan 17 2007, 11:20 AM Wrote:I'm not even sure the Zetec puts out 110whp :huh: Hell the stock Duratec is quoted at 136HP and that only translates into 108whp with an ATX (I have the dyno sheet to prove it)
NefCanuck
[right][snapback]223625[/snapback][/right]
That makes me warm and fuzzy... shooting for 130s with the Cossy CAI, MBRP catback and an X-Cal2 reflash.
[right][snapback]223654[/snapback][/right]
Hrm, I haven't done a new dyno with the new bits added (Only thing different from you is no reflash, I'm a little leery of mucking with the ECU while under warranty)
If there was a group dyno day I'd sure like to see but I'm not up to paying full tilt price for a go <_<
NefCanuck
[right][snapback]223662[/snapback][/right]
Put me down for a group dyno day, before or after my intake/exhaust are done.
Horse Power - NikiterZTS - 01-18-2007
yes i wanna go as well if anyone can actually organise one
Horse Power - Flofocus - 01-19-2007
if you guys want...I can check with my tuner and see if he would do a dyno day. Maybe he can get some tuning done for some you at the same time.