FocusCanada Forums
Looking For After Market Flex Pipe - Printable Version

+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Classifieds (//www.focuscanada.net/forum/forumdisplay.php?fid=5)
+--- Forum: Buy Items (//www.focuscanada.net/forum/forumdisplay.php?fid=28)
+--- Thread: Looking For After Market Flex Pipe (/showthread.php?tid=7721)

Pages: 1 2

Looking For After Market Flex Pipe - NikiterZTS - 10-25-2006

so my header is gonna be here any minute.....so my other deal with flex pipe is not happening any more.soooo i am looking to buy an after market flex pipe ...Focus sport and so on
preferebly local pick ups but shippin is alright too
well let me know guys


Nick


Looking For After Market Flex Pipe - Burnin21 - 10-25-2006

You know what I did? Pulled the flexpipe off my car, took it down to a local exhaust shop and got them to make a replica of mine but 2.5". Cost me about $100 but thats cheaper than getting one from trubendz.

Looking For After Market Flex Pipe - NikiterZTS - 10-26-2006

now that sounds interesting.....how long did it take them?

Looking For After Market Flex Pipe - NikiterZTS - 10-26-2006

p.s. if i won't go that rout ^^^^ whats a good place to order one?

Looking For After Market Flex Pipe - bigman - 10-26-2006

i got my BOSAL from work. PM if your interested.

Looking For After Market Flex Pipe - NikiterZTS - 10-26-2006

bigman,Oct 25 2006, 04:32 PM Wrote:i got my BOSAL from work.  PM if your interested.
[right][snapback]213375[/snapback][/right]


pm sent

Looking For After Market Flex Pipe - NikiterZTS - 10-26-2006

so i get home from work today...open the door and i see this box
[Image: Picture119.jpg]




open it and here it is....

[Image: Picture120.jpg]

can't wait to install it


Looking For After Market Flex Pipe - focus19 - 10-26-2006

just put mine on yesterday it was a "fun" couple of hours, the egr is a f**cker ,expect it to be loud


Looking For After Market Flex Pipe - NikiterZTS - 10-26-2006

focus19,Oct 25 2006, 11:51 PM Wrote:just put mine on yesterday it was a "fun" couple of hours, the egr is a f**cker ,expect it to be loud
[right][snapback]213405[/snapback][/right]


now are u running it with a stock flex or after market one?

Looking For After Market Flex Pipe - 02ztsian - 10-27-2006

You will really like it. I found the quality of mine to be very good, and check out the thickness of the flange. Plus, it has the prefered 1-4 and 2-3 pairings in it's 4-2-1 design, just like the SVT header.

Looking For After Market Flex Pipe - focus19 - 10-27-2006

NikiterZTS,Oct 26 2006, 08:41 AM Wrote:
focus19,Oct 25 2006, 11:51 PM Wrote:just put mine on yesterday it was a "fun" couple of hours, the egr is a f**cker ,expect it to be loud
[right][snapback]213405[/snapback][/right]


now are u running it with a stock flex or after market one?
[right][snapback]213423[/snapback][/right]



aftermarket, focus central

Looking For After Market Flex Pipe - NikiterZTS - 10-27-2006

can't wait to start workin on it...but this flex pipe buissness is really holding me off

goin to go to this one "muffler man" shop after work...my buddy has a relative working there...need to see how much would he charge me for welding a high flow cat

Looking For After Market Flex Pipe - NikiterZTS - 10-28-2006

so i went to the muffler shop yestarday......the guy quoted me roughly $80-$100 to weld high flow cat ......

but yea my next e-test is in 2 years.....so all i need for now is a bigger flex.....

just a quastion.....i measured my OBX header and it has diameter of 2.25"

and i see that most of flex pipes are 2.5" will the flanges for header and flex work fine togethere that way?

like the header and flex i can do myself....and after i'll take it to some shop to weld that cat on.....
if anyone know where to get a flex for a really good price please let me know.....for some reason they are pricey.....

and yes i asked the guy if he could make me a replica but then he was like "you are looking at straight time, and i don't think i have those flanges" .....like damn man....your shop is called "Muffler man" a flang shouldn't be a problem

Looking For After Market Flex Pipe - dBlast - 10-28-2006

You should look for a 2.25" flex instead of a 2.5" flex. With exhaust the smoother the passages the better. If you are going from 2.25" to 2.5" and then back to your 2.25" exhaust then there will be a turbulent section when it hits your 2.25" flange.

Looking For After Market Flex Pipe - NikiterZTS - 10-28-2006

dBlast,Oct 27 2006, 01:43 PM Wrote:You should look for a 2.25" flex instead of a 2.5" flex.  With exhaust the smoother the passages the better.  If you are going from 2.25" to 2.5" and then back to your 2.25" exhaust then there will be a turbulent section when it hits your 2.25" flange.
[right][snapback]213585[/snapback][/right]


i kinda had that in mind,,,,..does focus sport make their flex in 2.25'" at all?

Looking For After Market Flex Pipe - Alien-Tek - 10-28-2006

Nick,
try these guys, for a flex and cat. They've been helpful to me in the past. They're prices are pretty good too.

http://www.exhaustdirect.com



Looking For After Market Flex Pipe - Focus Is Art - 10-28-2006

Group buy maybe? :D

Looking For After Market Flex Pipe - Chromey - 10-29-2006

Ill get in on the Group for a 2.25 Flex...

Looking For After Market Flex Pipe - NikiterZTS - 10-29-2006

ok guys...any idea where we can get this group buy on flex pipe? (2.25" for me)

Looking For After Market Flex Pipe - NikiterZTS - 10-29-2006

Alien-Tek,Oct 27 2006, 02: Wrote:Nick,
try these guys, for a flex and cat. They've been helpful to me in the past. They're prices are pretty good too.

http://www.exhaustdirect.com
[right][snapback]213596[/snapback][/right]


so i called them...really good customer service...but they do not make after market compelete flex pipes

but the guy was really helpfule

and he said they do group buys