+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Canadian Focus Community (//www.focuscanada.net/forum/forumdisplay.php?fid=3)
+--- Forum: Focus Talk (//www.focuscanada.net/forum/forumdisplay.php?fid=18)
+--- Thread: Bent Hub Assembly (/showthread.php?tid=9959)
Bent Hub Assembly - focusnme - 04-27-2006
i just took my car to ford and found out the front left hub assembly is bent - 500 $ later and 2 days past and the front left wheel is shaking again? - any ideas on what is going on?? - the rims are straight and the tires are balanced
help
thanks
Bent Hub Assembly - Flofocus - 04-27-2006
Bring it back and complain.
Bent Hub Assembly - Focus man. Focus. - 04-27-2006
Don't touch it. Take it back right away. Don't even take the wheel off. If they said it was fixed when you picked it up it is their responsibility to check it again.
Bent Hub Assembly - ANTHONYD - 04-27-2006
Take it right back and let them know that the 500 dollars worth of work was not the issue.
Get your money back and go for a second opinion.
KEEP ALL PAPER WORK AND VOICE MAILS!!!!!
Bent Hub Assembly - focusnme - 04-27-2006
i am taking it back - but what can cause a hub to bent in 2 days - or what can cause it to bend in the first place!!!!!!!!!!!!!
Bent Hub Assembly - ANTHONYD - 04-27-2006
focusnme,Apr 26 2006, 11:34 AM Wrote:i am taking it back - but what can cause a hub to bent in 2 days - or what can cause it to bend in the first place!!!!!!!!!!!!!
[right][snapback]183467[/snapback][/right]
That's besides the point. The fact is that these guys told you this was the problem when in fact it wasn't.
Don't pay for the work done. Tell them you want a rental, and you don;t want your car back untill it's fixed.
I assume the wheels are properly balanced? what about bent tie rods??? they would have checked all this on you initial visit I'm sure....
Still, return it with the EXACT same complains as your last paperwork. Deal with the service manager now.
Bent Hub Assembly - focusnme - 04-27-2006
any thing else?
Bent Hub Assembly - ANTHONYD - 04-27-2006
Make sure you deal directly with the service manager now.
Bent Hub Assembly - P-51 - 04-27-2006
What could cause it to bend? A fairly heavy impact. Nothing that you wouldn't notice "Oooh, did I just run over a moose?". In fact, I'm not even sure how it could bend, most of the time they break.
The simple answer on what could cause the vibration? Dirt between the wheel interface and the hub and/or brake rotor and/or wheel interface is a good one.
This type of situation pisses me off so much. When those bastards take your money without fixing it. I wonder if you can call the Credit Card company, and dispute the charges.
You did not hire the garage to change your hub. You hired them to fix your vibration.
Bent Hub Assembly - ANTHONYD - 04-27-2006
^^^my point exactly.
You paid them to diagnose and fix the problem.... That is what they're paid to do.
Don't pay it, and have them fix the car once and for all.
Bent Hub Assembly - focusnme - 04-29-2006
it was the rotors!!!
Bent Hub Assembly - ZTWsquared - 04-29-2006
focusnme,Apr 28 2006, 01:21 PM Wrote:it was the rotors!!!Not surprising -- after all it is a Focus. Did they refund you the difference for the hub assembly?
[right][snapback]183905[/snapback][/right]
Bent Hub Assembly - nass - 04-29-2006
ZTWsquared,Apr 28 2006, 05:25 PM Wrote:focusnme,Apr 28 2006, 01:21 PM Wrote:it was the rotors!!!Not surprising -- after all it is a Focus. Did they refund you the difference for the hub assembly?
[right][snapback]183905[/snapback][/right]
[right][snapback]183907[/snapback][/right]
Yeah right. He'd be a very lucky guy if they did that. They will just say the problem was the hub AND the rotors.
Bent Hub Assembly - focusnme - 04-29-2006
yup - thats exactly what they said - but i got 2 new rotors (AGAIN) from raybestos - 420$ of brakes free - YES!!!!!!!!
Bent Hub Assembly - nass - 05-01-2006
focusnme,Apr 29 2006, 02:52 AM Wrote:yup - thats exactly what they said - but i got 2 new rotors (AGAIN) from raybestos - 420$ of brakes free - YES!!!!!!!!
[right][snapback]184018[/snapback][/right]
they told you it was both that caused the problem?!
Bent Hub Assembly - P-51 - 05-02-2006
Did you have to pay *anything* for the brake job? $420 is pretty steep. No way that's a real cost. Did you have to pay labour or something?
And why both sides?
This is a classic mechanics move. f*** em all in the goats ear.
Bent Hub Assembly - ANTHONYD - 05-02-2006
UPDATE?