Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Stock Headlights
#1
I tried to restore my stock headlights to their original clarity, using a product from the local parts store. Now, the headlights look worse! Am wondering if Megauirs Plast-x would work, or do I need new headlights? Help!
Proud member of the CDan nation.
2000 White ZTS: retired
2012 Frosted Glass SEL: active
K&N Filter.....
Reply
#2
I use Meguiars Plastic-X and believe it, it's more of a maintenance item than a restoration product. I know Performance Improvements has a product they continuously advertise to restore headlight clarity, i'd check them out.
'14 Escape 2.0t
2012 5dr Ti : Traded
Reply
#3
You need to use all 3 steps of the Novus system, or use something like Meguiars Plastx a LOT to get them to come up nice again. If you Put in some good time, and elbow grease with either product, you should get results more like what you want.

L8tz
Bleeding Ford Blue again...
Reply
#4
I sell the Plastix all the time and no one ever complained.
2000 ZX3
Reply
#5
Mason,May 13 2007, 08:03 PM Wrote:I sell the Plastix all the time and no one ever complained.
[right][snapback]238334[/snapback][/right]
And how much of my money would be needed for the Plast-X?
Proud member of the CDan nation.
2000 White ZTS: retired
2012 Frosted Glass SEL: active
K&N Filter.....
Reply
#6
About $15 at CDN Tire...

Use a terry cloth towel when doing it, it will cause the 'diminishing abrasives' to bite harder and take out the scratches quicker, as opposed to microfiber. And use multiple applications of it too. Once done with the Plast-X, use a wax or sealer on it to keep it clean longer. Any paste or liquid wax will do.

I used that stuff and brought my old Escort's head lights back to like new from yellow and crappy. The Focus will get the treatment shortly. It's also handy or your foglights on the Focus, or on helmet visors, etc.

Ryan
Ryan and the Silver Sedan
++++++++++++++++++++++++
2008 Mazda5 GS/Copper Red Mica/2.3 MZR 5AT/22% Tint
[Image: 49951.png]
2011 Ford F150 FX4 Supercrew/Race Red/3.5 TT EcoBoost
Reply
#7
reldridge,May 14 2007, 02:15 PM Wrote:About $15 at CDN Tire...

Use a terry cloth towel when doing it, it will cause the 'diminishing abrasives' to bite harder and take out the scratches quicker, as opposed to microfiber. And use multiple applications of it too. Once done with the Plast-X, use a wax or sealer on it to keep it clean longer. Any paste or liquid wax will do.

I tried Mothers Plastic Polish on my headlights and did not notice a difference. I was very disappointment (first time with a mothers product). I can feel the scratchs with my finger. I even tried 3-4 applications. Not sure if Past-X will be any different...
Yellow 2000 ZX3 - Tinted Windows, SVT Air Intake, MBRP Exhaust, NewEdge Performance 2.25" Flex Pipe, Focus Sport UDP, SVT Bumper, Ford Racing 9MM Wires, K&N Filter, XCal2 ECU Upgrade, Shorty Antenna, Ported Throttle Body
190,000 KM (120,000 Miles) and counting!
Reply
#8
bought the Plast-X. Used half a bottle, the scratches are still there, but, 100% better than before. The lights look new, from 10 feet away.I will keep up on the lenses, using the rest of the bottle, and a terry cloth rag for a bit. Later i am gong to use the Novus system.

Thanks to all for the advice, gentlemen.
Proud member of the CDan nation.
2000 White ZTS: retired
2012 Frosted Glass SEL: active
K&N Filter.....
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)