Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Shift Knob....
#1
anyone know where to get a cheep knob that will work on my 05 2.0? I like the RS one but it is pricey on Ebay and no one around here seems to have anything like that. the cheep silver paint on mine came off and it looks gay now!

Jake
Reply
#2
Try driverfx.ca or go to your CT store...they quite often have ones like the type you'd want in stock. Well, at least the two CT stores I deal with do...
Bleeding Ford Blue again...
Reply
#3
I have a Momo Race Air Leather shift knob that I've never used: http://www.focussport.com/shiftknobs.htm

PM me if you're interested.
Old Ride: 2001 Malibu Blue MTX Street Edition Wagon
New Ride: 2010 Mocha Brown MT 2.0T Passat Wagon
Reply
#4
I have a Billet aluminum knob with the gear shift pattern on top if you're interested. I'll get you some pics when I get back to Toronto.
Reply
#5
MAlby7,Jun 3 2006, 12:32 PM Wrote:I have a Billet aluminum knob with the gear shift pattern on top if you're interested.  I'll get you some pics when I get back to Toronto.
[right][snapback]191111[/snapback][/right]

i wanna see the pic too =)
2001 Yellow Focus ZX3
Reply
#6
I'd like to get the RS one as well, but your right they are quite pricey.
2004 Ford Focus ZX5 MTX75 - Liquid Grey -

15.7 @ 86mph

1994 Pontiac Trans AM 25th Anniversary 6 spd -

12.3 @ 110mph

2013 Ford Focus ST - Oxford White

1/4 TBD
[Image: image,Burnin1,black,blue.png]
Reply
#7
PM me if you're interested!

[Image: Shiftknob01.jpg]

[Image: Shiftknob02.jpg]
Reply
#8
Here's a pic of the Momo knob, if anyone's interested:

[Image: th_MomoKnob-0011.jpg]
Old Ride: 2001 Malibu Blue MTX Street Edition Wagon
New Ride: 2010 Mocha Brown MT 2.0T Passat Wagon
Reply
#9
Hey Malby, what's up with the shift pattern being too small for that hole? Just looks a little funny to see the glue underneath..

That Momo knob looks sweet, those can get a little pricey too though.

I've got the OEM Mercury Cougar knob on my car, looks the same as the black rubber 03+ knobs except it's got real leather. Not exactly a cheap piece either though since Ford parts are always a rip off.
Reply
#10
Some nice examples of manual shift knobs in this thread. Shame I can't find anything for an autotragic that still has the O/D function (Not that I ever turn it off really, but it's nice to have that option) Tried ebaying and examples I did find with O/D functions weren't exactly pretty :(

NefCanuck
Reply
#11
NefCanuck,Jun 11 2006, 06:42 PM Wrote:Some nice examples of manual shift knobs in this thread.  Shame I can't find anything for an autotragic that still has the O/D function (Not that I ever turn it off really, but it's nice to have that option)  Tried ebaying and examples I did find with O/D functions weren't exactly pretty :(

NefCanuck
[right][snapback]192548[/snapback][/right]

Could you just run a wire somewhere else and move the OD button of the shifter? If you could do that you could still have the OD feature but buy any shifter you want.
Current
09 F150 SCREW 4X4 XTR

Former
Show
Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp
Go
Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads

Reply
#12
habmann,Jun 11 2006, 05:15 PM Wrote:Could you just run a wire somewhere else and move the OD button of the shifter? If you could do that you could still have the OD feature but buy any shifter you want.
[right][snapback]192553[/snapback][/right]

I think it's possible.. I think it was Tony (ZOOM) that did that on his automatic. It's possible to run the OD button to a switch mounted somewhere else, dont know how hard it is to do though.
Reply
#13
guilty,Jun 11 2006, 10:37 PM Wrote:
habmann,Jun 11 2006, 05:15 PM Wrote:Could you just run a wire somewhere else and move the OD button of the shifter? If you could do that you could still have the OD feature but buy any shifter you want.
[right][snapback]192553[/snapback][/right]

I think it's possible.. I think it was Tony (ZOOM) that did that on his automatic. It's possible to run the OD button to a switch mounted somewhere else, dont know how hard it is to do though.
[right][snapback]192608[/snapback][/right]

I didn't think it would be too hard to do. Running wire in the focus isn't all that tough. Prolly would only take a few hours to do.
Current
09 F150 SCREW 4X4 XTR

Former
Show
Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp
Go
Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads

Reply
#14
Someone on FocusFanatics swaped out an Escape auto shift knob into an auto Focus and it looked sweet. It had the O/D button and I think the swap was almost a direct change over. I think he said that he needed to drill one small hole in the shaft for the set screw to go thru as the Escape's was in a different position. Have a look in an Escape next time you see one. The auto knob is actually quite nice.

Here is the link to the thread in FF
Focus man, Focus........ Team Psychological Disaster
2008 Taurus X to be modded.
2002 ZX5 parted out. Forever known as the "SLOCUS".

2010 Dyno #'s 102.96HP/105.84TQ
2011 Dyno #'s 111.44HP/115.17TQ
Still The Weakest LinkBlush

Dial 1-800-AUTO-PARTS for your local speed shop.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Photo Anarchy Motive shift knob Krusty Driver 6 4,463 03-15-2013, 08:45 AM
Last Post: Krusty Driver
  Euro Shift Knob... Jmountney1 6 3,826 02-04-2010, 01:12 PM
Last Post: paolo
  Anyone Ever Installed A New Automatic Shift Knob? NefCanuck 7 3,992 09-17-2007, 11:53 AM
Last Post: ZTWsquared
  Swapping Auto Shift Knob NOS2Go4Me 8 2,787 02-08-2005, 11:09 AM
Last Post: smith21

Forum Jump:


Users browsing this thread: 1 Guest(s)