Hi, Guest
|
Need A Header Gasket!? But Where Can I Get One?
|
08-24-2005, 04:41 AM
Oscar The Grouch,Aug 22 2005, 09:10 PM Wrote:BradfordZX3,Aug 22 2005, 07:48 PM Wrote:I know you are not coming to Nova Scotia I was asking the guy that started this message that said he was going to Nova Scotia Good luck on your way to Cape Breton the roads are rough I have the same suspension set up and the drive was hell you better go easy 
08-24-2005, 09:55 AM
(This post was last modified: 08-24-2005, 09:55 AM by Oscar The Grouch.)
I'd say go to Ford. It'll probably cost more than 15 bucks to get one shipped from North Bay on short notice.
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.
Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come. Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. 
08-24-2005, 12:44 PM
BradfordZX3,Aug 23 2005, 01:41 PM Wrote:Oscar The Grouch,Aug 22 2005, 09:10 PM Wrote:BradfordZX3,Aug 22 2005, 07:48 PM Wrote:I know you are not coming to Nova Scotia I was asking the guy that started this message that said he was going to Nova Scotia I've got these rubber spacers i'm gonna try and hope that it won't be so rough and my stock rims/tires are gonna be on too the spacers should give me a 1" lift in the front and 2" lift in the back. i hope that they'll save my car a bit :unsure:
2002 pitch black ZX3
__________________ Mach HIDs, 02 RS upper grille, Cervini's body kit, DTM drop mirrors, D2 coilovers, purple focussport strut tower bar and chrome rear bar, purple FC tb, Powerworks supercharger, optima yellow top, SVT ceramic coated header,Random Tech SVT/Zetec hi-flow cat , bosal flex, vibrant cat back with custom dual tips, b&m short throw shifter, pro-fit fuel door, shorty antenna, race-pedals.com "focus" pedals, clear 3rd brake light, SVT hvac controls, Transfer Racing billet hvac knobs, RS shift knob, RS Sparco E-brake handle, Mazda3 rear wiper, CarZone 3 piece roof wing, 17" Keskin KT4 wheels Classic Painting 
08-25-2005, 02:25 AM
SL8RZZX3,Aug 23 2005, 09:44 PM Wrote:I've got these rubber spacers i'm gonna try and hope that it won't be so rough and my stock rims/tires are gonna be on too What do these spacers look like? where did you get them, incase i ever need. Let me know how they work out
08-25-2005, 03:58 AM
Crazirich,Aug 24 2005, 11:25 AM Wrote:SL8RZZX3,Aug 23 2005, 09:44 PM Wrote:I've got these rubber spacers i'm gonna try and hope that it won't be so rough and my stock rims/tires are gonna be on too Wasn't the exhaust gasket, it was the one between the header and cat again for like the 6th time the spacers didn't work, might work in the front but the ones for the back were to big(springs too small). So i'll be rolling down lowwered :unsure:
2002 pitch black ZX3
__________________ Mach HIDs, 02 RS upper grille, Cervini's body kit, DTM drop mirrors, D2 coilovers, purple focussport strut tower bar and chrome rear bar, purple FC tb, Powerworks supercharger, optima yellow top, SVT ceramic coated header,Random Tech SVT/Zetec hi-flow cat , bosal flex, vibrant cat back with custom dual tips, b&m short throw shifter, pro-fit fuel door, shorty antenna, race-pedals.com "focus" pedals, clear 3rd brake light, SVT hvac controls, Transfer Racing billet hvac knobs, RS shift knob, RS Sparco E-brake handle, Mazda3 rear wiper, CarZone 3 piece roof wing, 17" Keskin KT4 wheels Classic Painting
B)
2002 pitch black ZX3
__________________ Mach HIDs, 02 RS upper grille, Cervini's body kit, DTM drop mirrors, D2 coilovers, purple focussport strut tower bar and chrome rear bar, purple FC tb, Powerworks supercharger, optima yellow top, SVT ceramic coated header,Random Tech SVT/Zetec hi-flow cat , bosal flex, vibrant cat back with custom dual tips, b&m short throw shifter, pro-fit fuel door, shorty antenna, race-pedals.com "focus" pedals, clear 3rd brake light, SVT hvac controls, Transfer Racing billet hvac knobs, RS shift knob, RS Sparco E-brake handle, Mazda3 rear wiper, CarZone 3 piece roof wing, 17" Keskin KT4 wheels Classic Painting
08-26-2005, 04:40 AM
Luckily i still had one i made from Mr.gasket! hopefully it'll last the week! If not i'll have them fawking wielded together! :angry:
Has anyone else had alot of problems with their shorty headers blownin' out gaskets between it and the cat??? :blink: :huh: :unsure:
2002 pitch black ZX3
__________________ Mach HIDs, 02 RS upper grille, Cervini's body kit, DTM drop mirrors, D2 coilovers, purple focussport strut tower bar and chrome rear bar, purple FC tb, Powerworks supercharger, optima yellow top, SVT ceramic coated header,Random Tech SVT/Zetec hi-flow cat , bosal flex, vibrant cat back with custom dual tips, b&m short throw shifter, pro-fit fuel door, shorty antenna, race-pedals.com "focus" pedals, clear 3rd brake light, SVT hvac controls, Transfer Racing billet hvac knobs, RS shift knob, RS Sparco E-brake handle, Mazda3 rear wiper, CarZone 3 piece roof wing, 17" Keskin KT4 wheels Classic Painting |
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Reuse Stock Header Gasket? | hardk0re | 6 | 3,184 |
03-19-2005, 02:10 AM Last Post: hardk0re |
|
![[Image: lakemitchellsml.jpg]](Http://i80.photobucket.com/albums/j174/crazirich2/lakemitchellsml.jpg)
![[Image: burnout1sml.jpg]](http://i80.photobucket.com/albums/j174/crazirich2/Burnouts/burnout1sml.jpg)
