Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Some Boring Action Shots
#1
[Image: Image-3F6B4C24B11D11D9.jpg]

[Image: Image-3F6B2DD4B11D11D9.jpg]

[Image: Image-3F6BE7FCB11D11D9.jpg]

[Image: Image-3F6C138AB11D11D9.jpg]

[Image: Image-3F6C2B15B11D11D9.jpg]

[Image: Image-3F6C3FD2B11D11D9.jpg]

[Image: Image-3F6C54C0B11D11D9.jpg]

[Image: Image-3F6CBE7EB11D11D9.jpg]

[Image: Image-3F6CFF2BB11D11D9.jpg]
[Image: ncclogo.jpg]
Reply
#2
look at him.. thinking he's all fast and stuff.. oh wait :ph34r:

:lol:

nice pics man.. i like how you can barely see the intercooler with the grill.. if you paint it again, it'll be even stealthier..

what was the other car taking pics? any challenge?
ZX3T gone..
Reply
#3
2003 Celica GTS

Even with me shifting at 5000 RPM, he said I walked away. He stopped trying after he shifted from 2nd to 3rd. He said their wasnt a point. :ph34r:
[Image: ncclogo.jpg]
Reply
#4
That's too awesome!

Mmmmm stealthed Focus with a wee snail under the hood ;) :o
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#5
I hope you were driving to get your dyno :) I'm currious to see it... :D

Reply
#6
hardk0re,Apr 20 2005, 10:32 AM Wrote:I hope you were driving to get your dyno :)  I'm currious to see it...  :D
[right][snapback]102952[/snapback][/right]

Nope, Tom still wants to know the STFT and LTFT before I go on a dyno. I'm meeting up with Steve (Darkpuppet) this Friday to log my car and get those values for Tom. Once Tom sends me the new chip, I will make an appointment with TappAuto here in Ottawa to get the dyno done. Currently, the car drives nice and strong, I just dont want to rev her to high since I have no clue what its really doing in there.

BUT, I was reading one of your posts about tow hooks and dynos....From what I remeber, Jay and I removed the driver side Tow hook for the Air filter arm to fit properly, Im wondering if I will run into some problems at the dyno because of that.....
[Image: ncclogo.jpg]
Reply
#7
Nice nice.. yeah i like those celicas but not very fast for their power ratings.. I kept beating one last year at luskville who had the paddles to shift.. and he didn't get it (i didn't get it either).. i kept beating him with like .3-.6 of a second everytime

i can only imagine with your car ;)

i was gonna say, is there a meet in orleans tonight? but the weather doesn't look good..

just an update, i was about to continue my piping.. well goddamn i lost a 90 degree bend that i had made.. i tried it on sunday just to see if it would fit the same on both side (so that id duplicate it) and i think i "might" have left it there not even with a coupler.. i was just looking at it.. well now i can't find that stupid piece and its the one i need to make the rest.. thank you god for making this even longer than it needs to be.. how would that happen? even if i left it there.. my car is so rough and so is my driveway.. it was have fell like 2 seconds after going in reverse.. anyway so now im missing a elbow.. i had just enough to do the whole thing.. not anymore it seems..

sorry i had to complain..

back to topic
ZX3T gone..
Reply
#8
yeah, I wasnt worried about the GTS pulling on me. :lol:

I'm trying to get my freind with his RSX Type-S. That thing moved and Im curious to see what my car can do against it.

PS: I have extra piping :P
[Image: ncclogo.jpg]
Reply
#9
yeah i'd like to see that too!

hehe yeah i might have to get one of your 2.5 u-bend ;) ill let you know if i don't find it
ZX3T gone..
Reply
#10
can you use the digicam to take short videos??
im sure everyone else is wiht me in wanting to hear the car.
'05 Grand Cherokee LTD Hemi

'02 black ZX5 ****currently on jack stands my parents garage missing a transmission****
--FC/OBX 4-2-1 Race Header--FS Flex--MBRP catback exhaust--AEM CAI--Brembo Brakes with Hawk HPS pads--Toucan(ractive) 9mm Plug wires--FC Plug wire cover--Polished aluminum Ractive Strut Bar
Not installed: FK 60/40 Springs
Reply
#11
ZX5focused,Apr 20 2005, 11:15 AM Wrote:can you use the digicam to take short videos??
im sure everyone else is wiht me in wanting to hear the car.
[right][snapback]102977[/snapback][/right]

I've got lots of video. What im doing is documenting everything from the install to the datalogging, and once I can get to it.....the dyno.

Hopefully I will have a nice short vid for everyone to view within the next month. B)
[Image: ncclogo.jpg]
Reply
#12
Flofocus,Apr 20 2005, 11:22 AM Wrote:
ZX5focused,Apr 20 2005, 11:15 AM Wrote:can you use the digicam to take short videos??
im sure everyone else is wiht me in wanting to hear the car.
[right][snapback]102977[/snapback][/right]

I've got lots of video. What im doing is documenting everything from the install to the datalogging, and once I can get to it.....the dyno.

Hopefully I will have a nice short vid for everyone to view within the next month. B)
[right][snapback]102983[/snapback][/right]
thats what i want to hear!!
ive been playing with the video function on my digi cam and ill soon have soem video of my friend with the turbo escort zx2 to share :)
'05 Grand Cherokee LTD Hemi

'02 black ZX5 ****currently on jack stands my parents garage missing a transmission****
--FC/OBX 4-2-1 Race Header--FS Flex--MBRP catback exhaust--AEM CAI--Brembo Brakes with Hawk HPS pads--Toucan(ractive) 9mm Plug wires--FC Plug wire cover--Polished aluminum Ractive Strut Bar
Not installed: FK 60/40 Springs
Reply
#13
Vids, Pics and Dynos....

I'm getting tuned/dynoed on Friday (can't wait). I'll video tape it, so we are either going to get a smoke show of my car grenading or another cool turbo/dyno video... I do hope it is the last option....

Someone else is going to Steeda this Friday to get tuned(with a focus), is it anybody from here?
Reply
#14
Hey Flo, you and Steve going for beers after your datalogging session?
2000 Black ZX3
Blacked Out Head & Tail lights - APC Clear Turn Signals - 20% Tint All Round - K&N Filter - Cheap ass fogs that are brighter than my headlights - Clarion DXZ745MP - Jensen XA 4100 amp on Mobile Authority 200w 6x8's - Jensen 340w amp on a 12" Rockford Sub, custom enclosure - KYB GR2 Dampers - SHM Springs @ 1.5" - Brembo Cross Drilled Rotors w/ CVR Ceramic Pads - Silver Gauge Bezel - Focus Central 2-Piece Under Drive Pullies - 17 x 7 Rims by Fast Wheels mounted on 215/40/17's - Wings West W-Typ front lip - Coming Soon: Paint, Component Speakers (Spring 06)
Reply
#15
Raine,Apr 20 2005, 01:03 PM Wrote:Hey Flo, you and Steve going for beers after your datalogging session?
[right][snapback]103025[/snapback][/right]

I don't think so. I have to then drive to London to start packing up the GF's stuff for her trip back home.

I will owe Steves some beer tho. :ph34r:
[Image: ncclogo.jpg]
Reply
#16
hardk0re,Apr 20 2005, 12:20 PM Wrote:Vids, Pics and Dynos....

I'm getting tuned/dynoed on Friday (can't wait).  I'll video tape it, so we are either going to get a smoke show of my car grenading or another cool turbo/dyno video... I do hope it is the last option....

Someone else is going to Steeda this Friday to get tuned(with a focus), is it anybody from here?
[right][snapback]103013[/snapback][/right]

Steeda offered to give my car a run on the dyno this week but I still have a few things to finish off before I dyno tune (idle gremlin, SVT headers.)
vintage 2000 malibu blue ZX3 ***SOLD***
2013 performance blue ST

TEAM P.I.T.A.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Action Shots! SVTDavan 2 1,208 05-18-2004, 10:29 AM
Last Post: JSI

Forum Jump:


Users browsing this thread: 1 Guest(s)