Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Program FOB to my 2000 Windstar
#1
Ok so I know there are a few that have worked on these windstars, so you might be able to help....I got my van used and it never came with a FOB/Keyless entry remote, I have a extra one from my Focus and would like to program it to the Windstar....Power locks yes I do have. I tried the key in the ignition and turning off and on to program it, like the focus but it wont work. Can anybody help me out. Thanks
E.O Masiv!
New look for the summer
SVT ZX5 Focus Build#56 01/29/2003
I think there is something wrong with my car, every time I shift I hear Psssst noise?
Looking to get 25-30psi with a Procharger


[Image: style7,TikEtZ.png]
Reply
#2
Have you had the recall on the Windstar for the rear axle checked yet?
TEAM PITA Don't settle for a wannabe, only accept the real deal.

One day I will rule the world. For now, I have to settle for this place.
Reply
#3
unlock the doors, cycle the ignition off to run 8 times, end in the run position the doors should lock/unlock, then press the remote, the locks should unlock/lock and its programed.
PPSSSSSSSSSTTTTT......CHHHHAAAAAAAAAAAAAA

2000 Black zx3-daily driver> Stealth bomber
custom "bigman" turbo, all Black everything, SVT blue interior,
SVT suspension, Magnaflow exhaust, AEM gauges
2000 Yellow ZX3...stock with MRBP exhaust...
1979 Mercury Capri 5.0 swap (work in progress)
2002 focus SE-wrecked/scraped/parted out RIP
1993 Vw Passat 1.9L tdi...das diesel sipper sold parted RIP
1993 mazda B2600 4x4 POS, parted, rusted to pieces
1990 Toyota 4runner 4x4 mud beast
Reply
#4
(11-22-2010, 12:51 PM)meford4u Wrote: Have you had the recall on the Windstar for the rear axle checked yet?

I did get the letter, but i have not taken it to Ford yet.

(11-22-2010, 01:54 PM)buzz2.0 Wrote: unlock the doors, cycle the ignition off to run 8 times, end in the run position the doors should lock/unlock, then press the remote, the locks should unlock/lock and its programed.

I did try that it didn't work....my front doors do not lock/unlock anymore by pressing the bottom just my side and rear works, not sure if that would anything to do with it.
E.O Masiv!
New look for the summer
SVT ZX5 Focus Build#56 01/29/2003
I think there is something wrong with my car, every time I shift I hear Psssst noise?
Looking to get 25-30psi with a Procharger


[Image: style7,TikEtZ.png]
Reply
#5
you still need 2 working key to program 3rd key.

you cannot have 1 key to program 2nd key.
dealer will charge you somewhere around $125.
BLACKBOX(DASHCAM) | LED | HID | REMOTE STARTER + SECURITY | 12 VOLT ACCESSORIES | CAR ENTERTAINMENT | PERFORMANCE UPGRADE | MAINTENANCE REPAIR
[Image: banner_468x60_zps1c433cb9.gif]
info@motormaniac.ca | 905.508.3737
If you are calling after hours, please leave a pm or detailed voice mail and we will get back to you as soon as possible.
Reply
#6
Did you realize that if the axle is cracked in any way(and ALOT are cracked) they are buying the vehicles back from the customer?
TEAM PITA Don't settle for a wannabe, only accept the real deal.

One day I will rule the world. For now, I have to settle for this place.
Reply
#7
(11-23-2010, 05:35 PM)meford4u Wrote: Did you realize that if the axle is cracked in any way(and ALOT are cracked) they are buying the vehicles back from the customer?

Really....Good to know Thanks




(11-23-2010, 01:25 PM)konafocuswrc Wrote: you still need 2 working key to program 3rd key.

you cannot have 1 key to program 2nd key.
dealer will charge you somewhere around $125.

I have only one key that has the chip in it....I don't want a third key or second, just to program a keyless entry remote to the Windstar.
E.O Masiv!
New look for the summer
SVT ZX5 Focus Build#56 01/29/2003
I think there is something wrong with my car, every time I shift I hear Psssst noise?
Looking to get 25-30psi with a Procharger


[Image: style7,TikEtZ.png]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)