Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What Parts Needed For Turbo ...
#1
Well the more I look the more I plan on soon getting the focus sport turbo ... was just wondering what all will I need thats not included in the kit so I can buy that first ... thanks in advance

oh its a 2.0 Duratec automatic.
Ford Focus SES ZX5
Blue Underglow, Clear Corners, Shorty antenna, vogtland springs , Rust Module,Truebendz 2.5 ss magnaflow and Fuzion 205/50/16 HRI's
TEAM DURATEC # 99
Reply
#2
I'm in the same boat as you.
I'm probably buying a FS stage 1 turbo with 10K Km on it.

I'll be getting the c-f-m injector adapter so I don't have to cut/solder the bosch injectors. 65$ US
[Image: cfm-ttod.jpg]

A good exhaust is to be expected, like MBRP's new 2.5" flex back system. Price still unknown.

A LSD and better clutch should be added if your going for stage 2.
I'm gonna wait and use the OEM stuff untill I get more moola to buy those.

I'm guessing a bigger TB would help to produce a few more ponies, ut again, I'll be putting that later.

The FS satge 1 is supposed to have everything you need to make it work. All the other stuff is to make it work even better (aka more HP) ;)

I'm sure I'm missing some stuff as I'm new in this turbo world!

EDIT----> Almost frgot, a boost guage can be handy :)
2007 CD Silver ST  **** FOR SALE ****
2014 Performance Blue ST  **** SOLD ****

2016 Ford Edge Sport Shadow Black
Reply
#3
Well I got exhaust and I think im only gonna be using stage 1 at 8spi until maybe I can afford a lentech tranny since im an automatic ... well just wait and see ... those injector adapters are a great idea.

I was thinking ...

Throttle Body
Engine Mounts
Boost Gauge
Oil Pressure Gauge
maybe msd coil on plug not sure if they would make a diff.
Ford Focus SES ZX5
Blue Underglow, Clear Corners, Shorty antenna, vogtland springs , Rust Module,Truebendz 2.5 ss magnaflow and Fuzion 205/50/16 HRI's
TEAM DURATEC # 99
Reply
#4
Innovative LC-1 wideband A/F meter, vital for logging/tuning from home via FocusSport

Otherwise, that's not a bad list!
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#5
Focussport also seems to be recommending colder plugs for Stage 1 which they are selling for $10 each.

I notice that their price includes a "free" dyno session (IIRC they're in Cali) ... I wonder what kind of a discount they give to someone who can't use it?

That package looks pretty complete (to a non-expert like me) ... even includes the XCal2 and a tune, which based on what I've read on this board is perhaps the most critical element to the success of FI.

zx5power,Aug 5 2007, 07:41 PM Wrote:Well the more I look the more I plan on soon getting the focus sport turbo ... was just wondering what all will I need thats not included in the kit so I can buy that first ... thanks in advance

oh its a 2.0 Duratec automatic.
[right][snapback]245796[/snapback][/right]
2008 Fusion SEL MTX - DD1 * 2009 Fusion SEL - DD2 * 2007 Focus ZXW - R*I*P * 2004 Focus ZTW CD Silver - sold * 2004 Focus ZTW Black - sold * 2003 Focus ZTW Black - sold * 2001 Focus ZTW Gold - sold * 2000 Focus SE Wagon (ZTW option) - Black - sold * 2000 Focus SE Wagon (ZTW option) - Gold R*I*P

2003 Focus ZX5 infra-red Track Rat - R*I*P
2003 ZX5 CD Silver Track Rat - retired, but still in the driveway


New track rat: 2000 ZX3, Atlantic Blue * JRSC with lots more to come

* New Zetec crate motor - NFG - thanks Topspeed *
Reply
#6
Unfortunately you're SOL if you can't make it there for the tune - the offer for dyno tuning doesn't extend to any other shop's rollers. They DO guarantee that you'll be 100% safe and making 95% of your potential power for each kit at whatever boost level you take (the stock 8 PSI at Stage 1 or anything up to 11 PSI with stage 2 and beyond).

The base tune is enough to get you home if you don't install the kit right where you live / will be doing the tuning. Everything else is done via emailed log files from your XCal2, collected via SCT's LiveLink software from what I can tell.
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#7
I got a local place that can dyno tune , so anywhere sell mounts for duratec for passenger side ?
Ford Focus SES ZX5
Blue Underglow, Clear Corners, Shorty antenna, vogtland springs , Rust Module,Truebendz 2.5 ss magnaflow and Fuzion 205/50/16 HRI's
TEAM DURATEC # 99
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Svt Parts Needed incognito27 1 985 05-22-2006, 02:01 PM
Last Post: guilty
  List Your Turbo Parts ZX3TUNR 40 11,430 08-08-2004, 01:03 PM
Last Post: naz

Forum Jump:


Users browsing this thread: 1 Guest(s)