Hi, Guest
|
Omfg Awesome
|
http://www.trader.ca/powerpage/details.asp...93&adid=5516957
Getting the pennies together boy's this thing rocks. I took it for a test drive on saturday. My goodness what a drift machine!!!!!!!!!
Flying through the twisties
SUNDOWN 
11-20-2006, 09:40 PM
Buying another Pony eh Bill. Looks like a sweet car. It could do without the louvers but all in all it is nice. Are there any mods on that car? For some reason it looks like there is something interesting under the hood because of the hood pins.
Also how is the PW install going? We haven't heard anything about that lately.
Focus man, Focus........ Team Psychological Disaster
2008 Taurus X to be modded. 2002 ZX5 parted out. Forever known as the "SLOCUS". 2010 Dyno #'s 102.96HP/105.84TQ 2011 Dyno #'s 111.44HP/115.17TQ Still The Weakest Link  Dial 1-800-AUTO-PARTS for your local speed shop. 
11-20-2006, 10:15 PM
not bad i guess
the rims r kinda fugly i like the paint scheme though
02' SONIC BLUE, SVTF #2686 OF 4788
K&N FIPK SCT XCAL-2 POWERED BY STEEDA SCREAMIN' DEMON COIL PACK & LIVEWIRES STEEDA STRUT TOWER BRACE (SONIC BLUE) STEEDA STS STEEDA REAR POLY MOTOR MOUNT DEI HEADER WRAP MBRP 2.5" EXHAUST EBC GREENSTUFF PADS EBC SLOTTED AND DIMPLED ROTORS RUSSELL STEEL BRAIDED LINES EURO SVT RIMS 17" General Exclaim UHP ALPINE H/U Winter package includes Euro SVT RIMS with Nokian WR'S Focus man, Focus.,Nov 20 2006, 06:40 AM Wrote:Buying another Pony eh Bill.ÃÂ Looks like a sweet car.ÃÂ It could do without the louvers but all in all it is nice.ÃÂ Are there any mods on that car?ÃÂ For some reason it looks like there is something interesting under the hood because of the hood pins. The PW install is going along a little stalled right now just because its busy season at work. I got my tranny back 2 weeks ago $1600.00 had the qualify diff install and 4.06 gears. All new shifter cables. I am suppose to pick up the block on thursday I got a complete tear down done. New SVT rods new slugs not that it needed it. Got the head flows and polished decide to get it repainted factory black. Took the power works in and had it powder coated red like my interor. Picked up a few other things while I have been at it. KW Coilover Variant 2 kit. New tires and rubber from the tire rack Kazera KZ-A Dual PCD 18", BFGoodrich g-Force T/A KDW I also bought the cat delete pipe. So far thats about it. Time to slow down on the spending though. I could use a hand in a couple of weeks putting everything back together if anyone is interested.
Flying through the twisties
SUNDOWN 02_svt_guy,Nov 20 2006, 07:15 AM Wrote:not badÃÂ i guessThose are Foose rims bud Don't get no better than that. But I guess its all about taste!!!
Flying through the twisties
SUNDOWN 
11-20-2006, 11:43 PM
I'd love to help...but I'd rather learn / strip bolts on my own car :lol:
11-21-2006, 12:37 AM
wow Billy u are spending enough eh...
but yea id like to help ya cuz i'll be purchesing one in a while as well so i need to see how and what and where things go for PW as for stang, thing looks great...i love the rims! but that thing is way out of my wallet :) anyways all the best
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq 2006 Subaru Impreza WRX with JDM 6 speed 207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph 320whp/330wtq Innovative tuned on Mustang dyno (Stage 3) 352whp/360wtq Dynojet 13.3@106mph 2004 Ford F-150 Lariat 2008 Honda CBR600RR "Silver Bullet" R.I.P. 2009 Honda CBR600RR "To Punish & Enslave" 2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul" 2013 China 90cc dirt bike 
11-21-2006, 02:00 AM
Looks freakin sweet, except for those rear window louvers. *Yuck*
11-21-2006, 02:29 AM
It looks like the illegitimate love child of Carrol Shelby and K.I.T.T. from Knight Rider! :lol:
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"
33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned. Daily driver 2: 2006 Subaru Legacy GT COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune. 
11-21-2006, 05:13 AM
Thats a sweet looking ride. I for one love the louver look on the back of the car. Wish i had enough pennies for a car like that.
Current
09 F150 SCREW 4X4 XTR Former Show Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp Go Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads 
11-21-2006, 07:26 AM
That car is sweetness. Love it. You should buy it and take me for a ride. I'll let you borrow my wife.
TEAM PITA Don't settle for a wannabe, only accept the real deal.
One day I will rule the world. For now, I have to settle for this place.
11-21-2006, 07:32 AM
meford4u,Nov 20 2006, 04:26 PM Wrote:That car is sweetness. Love it. You should buy it and take me for a ride. I'll let you borrow my wife. thats the spirit im looking for
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq 2006 Subaru Impreza WRX with JDM 6 speed 207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph 320whp/330wtq Innovative tuned on Mustang dyno (Stage 3) 352whp/360wtq Dynojet 13.3@106mph 2004 Ford F-150 Lariat 2008 Honda CBR600RR "Silver Bullet" R.I.P. 2009 Honda CBR600RR "To Punish & Enslave" 2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul" 2013 China 90cc dirt bike 
11-21-2006, 09:15 AM
I love the 2-tone scheme on that car.. only thing is you'd have to take off those horrible louver things.
11-21-2006, 09:23 AM
Not to knock Foose but those rims arent anythign special.........the last thing Id want on a race car are overwieght rims.
I saw my first Shelby a month ago and damn thats a mean sounding and mean looking stang.......really dont give a s*** about stangs but this one really impressed me.
I drive a 2010 Golf that growls at people when it goes over 3000rpm.
the louvers aren't my deal either.
I am suprised no one notice the saleen style delete between the tails heres a close up of the wheels http://www.chipfoose.com/wheels.aspx?LinkID=tn8 Summit ford is building cars to peoples specs.
Flying through the twisties
SUNDOWN
11-23-2006, 03:11 AM
I'd never put a set of Foose wheels on the focus for obvious reasons, but on a mustang, I don't know that you can find hotter wheels for a muscle car.
Current
09 F150 SCREW 4X4 XTR Former Show Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp Go Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads 
11-23-2006, 07:40 AM
Brant County Ford had a Roush Mustang GT for sale for a while...they are a Roush liscenced dealer, and that car had over 400hp to the wheels, and over 400 ft lbs too...totally sick...
The meanest GT I've seen though, is the one that they had at SHM...it had a Kenne Bell S/C and intercooler and whatnot, exhaust, TB, tuning, and some other stuff they wouldn't tell me, and it spun the dyno over 600hp WITHOUT spray (which the car has too).... I think that the GT Mustang is a bargain killah, and was designed as a big F-U to the imports in and over it's pricerange...
Bleeding Ford Blue again...
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Omfg | Slimsride | 24 | 9,814 |
11-02-2005, 05:45 AM Last Post: ZX5focused |
|
![[Image: image,Burnin1,black,blue.png]](http://www.sloganizer.net/en/image,Burnin1,black,blue.png)