Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pics Of Our Custom Face Gauges
#1
I hope that moderators will not be against such a thread. I am not sure if it is the right subforum, but anyway...

Here is my Speedhut gauges:

[Image: day_hi.jpg]
___

[Image: night_hi.jpg]

In reality, they look much better than my crappy camera can catch.
Qui custodiet ipsos custodes?
Reply
#2
Mods shouldn't have a prob with this.

Look pretty good. Altho why did you replace the stock ones with a set that look almost completely stock?
Current
09 F150 SCREW 4X4 XTR

Former
Show
Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp
Go
Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads

Reply
#3
I have a set of their guages as well. Yours look great. Did you take the needles off to install the face? I didn't. Here is a couple pic's of mine.
[Image: 2193703_37_full.jpg]
[Image: 2193703_36_full.jpg]
Focus man, Focus........ Team Psychological Disaster
2008 Taurus X to be modded.
2002 ZX5 parted out. Forever known as the "SLOCUS".

2010 Dyno #'s 102.96HP/105.84TQ
2011 Dyno #'s 111.44HP/115.17TQ
Still The Weakest LinkBlush

Dial 1-800-AUTO-PARTS for your local speed shop.
Reply
#4
habmann,May 31 2006, 06:27 PM Wrote:Look pretty good. Altho why did you replace the stock ones with a set that look almost completely stock?
[right][snapback]190771[/snapback][/right]
The problem, my dear chap, is that I live in one of the three countries that still did not adopt the metric system (guess, which one?) I was eager to instal such face gauges that would not contain the SAE scale at all. I was trying to instal the European stock gauges and some European aftermarket ones but without much success due to the fact that their bulbs are positioned differently from the NA version. Finally, after spending an aweful lot of money, I decided to go with Speedhut - something that should had been done in the first place. Well, that is my sad story.

By the way, I did not like the white face gauges because they had a hyper-reflective surface (white colour is the most reflective). At night they tend to reflect the outside light from the light poles or even traffic lights, and it did not look good to me.
Qui custodiet ipsos custodes?
Reply
#5
Focus man, Focus.,May 31 2006, 06:54 PM Wrote:Did you take the needles off to install the face?  I didn't. [right][snapback]190776[/snapback][/right]
I decided to put back my stock SAE gauges and then install the speedhut over them. Before, I had a crappy European aftermarket one that used the stock lighting. So, yeah, I had to take off the needles and then calibrate them afterwards.

By the way, did you notice that when you switch to blue colour, the adaptor starts making louder vibrating noise and the lighting also blinks? Maybe, it is just mine? However, green is fine.
Qui custodiet ipsos custodes?
Reply
#6
[Image: IMG_7008.jpg]

[Image: IMG_6999.jpg]
***want to buy***
MBRP................ check
SCT Xcal2 ........ check
VF mounts
Adj. Dampers ... check
Meford's Mom.... sale pending
Reply
#7
Peterbilt,May 31 2006, 10:27 PM Wrote:
habmann,May 31 2006, 06:27 PM Wrote:Look pretty good. Altho why did you replace the stock ones with a set that look almost completely stock?
[right][snapback]190771[/snapback][/right]
The problem, my dear chap, is that I live in one of the three countries that still did not adopt the metric system (guess, which one?) I was eager to instal such face gauges that would not contain the SAE scale at all. I was trying to instal the European stock gauges and some European aftermarket ones but without much success due to the fact that their bulbs are positioned differently from the NA version. Finally, after spending an aweful lot of money, I decided to go with Speedhut - something that should had been done in the first place. Well, that is my sad story.

By the way, I did not like the white face gauges because they had a hyper-reflective surface (white colour is the most reflective). At night they tend to reflect the outside light from the light poles or even traffic lights, and it did not look good to me.
[right][snapback]190784[/snapback][/right]

Ah ic, that would make sense then. Welcome to the metric system. :lol:
Current
09 F150 SCREW 4X4 XTR

Former
Show
Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp
Go
Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads

Reply
#8
It looks very well done!
Reply
#9
I like the aftermarket guages.... but I can't find any black ones like enough to put in. I LOVE my stock interior. Black on charcoal *drool* looks wicked when it;s clean.

I think white or silver guages will mess up the look I got going on.
Reply
#10
I ordered a set from S&H Autotrends, so hopefully they come in next week so I can post some pics as well :)
2004 Ford Focus ZX5 MTX75 - Liquid Grey -

15.7 @ 86mph

1994 Pontiac Trans AM 25th Anniversary 6 spd -

12.3 @ 110mph

2013 Ford Focus ST - Oxford White

1/4 TBD
[Image: image,Burnin1,black,blue.png]
Reply
#11
Yea, I have the white face guages too, they add a really nice look, especially at night, they glow pink :) (I have a bit of a problem with pink..) but I do have a new set coming in so I will get some pics up to show. :rolleyes:
~~2000 Midnight Blue 5-speed ZX3~~

~*~Evo 3 Body Kit~*~17'' BSA Gunmetal Black rims~*~Cold Air Intake~*~Angel Eye Projector Headlights~*~7'' Yellow Fog Lights~*~Tinted Altezza Tails~*~PINK Underglow~*~

Life is 10% what happens to you and 90% how you respond to it.
Reply
#12
jen_deans,Jun 1 2006, 08:08 PM Wrote:Yea, I have the white face guages too, they add a really nice look, especially at night, they glow pink :) (I have a bit of a problem with pink..) but I do have a new set coming in so I will get some pics up to show. :rolleyes:
[right][snapback]190908[/snapback][/right]


still waiting on those pics you promised me
***want to buy***
MBRP................ check
SCT Xcal2 ........ check
VF mounts
Adj. Dampers ... check
Meford's Mom.... sale pending
Reply
#13
nass,Jun 1 2006, 04:17 PM Wrote:
jen_deans,Jun 1 2006, 08:08 PM Wrote:Yea, I have the white face guages too, they add a really nice look, especially at night, they glow pink :) (I have a bit of a problem with pink..) but I do have a new set coming in so I will get some pics up to show. :rolleyes:
[right][snapback]190908[/snapback][/right]


still waiting on those pics you promised me
[right][snapback]190910[/snapback][/right]

I'm only ever on the computer while I'm at work, I have to make a point of uploading the pics when I get home! I will I will!
~~2000 Midnight Blue 5-speed ZX3~~

~*~Evo 3 Body Kit~*~17'' BSA Gunmetal Black rims~*~Cold Air Intake~*~Angel Eye Projector Headlights~*~7'' Yellow Fog Lights~*~Tinted Altezza Tails~*~PINK Underglow~*~

Life is 10% what happens to you and 90% how you respond to it.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Face Gauges focusonthis88 3 1,453 09-17-2005, 04:25 PM
Last Post: smith21
  White Face Gauges Slimsride 11 3,014 08-20-2005, 05:08 PM
Last Post: Slimsride

Forum Jump:


Users browsing this thread: 1 Guest(s)