Posts: 9,588
Threads: 529
Joined: Mar 2004
Reputation:
1
No third option on the pads only? I'd even toss in for shipping (or see if a local member would grab them for me). I just had my discs done like 10k ago.
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"
33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.
Daily driver 2: 2006 Subaru Legacy GT
COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Posts: 2,781
Threads: 215
Joined: Dec 2004
Reputation:
0
count me in mitch, hawk pads and brembo blanks
'05 Grand Cherokee LTD Hemi
'02 black ZX5 ****currently on jack stands my parents garage missing a transmission****
--FC/OBX 4-2-1 Race Header--FS Flex--MBRP catback exhaust--AEM CAI--Brembo Brakes with Hawk HPS pads--Toucan(ractive) 9mm Plug wires--FC Plug wire cover--Polished aluminum Ractive Strut Bar
Not installed: FK 60/40 Springs
Posts: 1,251
Threads: 84
Joined: Jun 2004
Reputation:
0
NOS2Go4Me,Jun 17 2006, 07:06 PM Wrote:No third option on the pads only? I'd even toss in for shipping (or see if a local member would grab them for me). I just had my discs done like 10k ago.
[right][snapback]193680[/snapback][/right]
Shipping on just pads you mean?
Like $10-15cnd to most place i would think....
Posts: 2,129
Threads: 77
Joined: Aug 2004
Reputation:
0
so there is nothing for drums and shoes?? or is everyone just interested in the rotors/pads?
***want to buy***
MBRP................ check
SCT Xcal2 ........ check
VF mounts
Adj. Dampers ... check
Meford's Mom.... sale pending
Posts: 309
Threads: 13
Joined: Nov 2005
Reputation:
0
Well, since the rears only do 20-25% of your overall braking, there are almost no options available. Anyone that DOES want to upgrade, goes for the SVT rear disc swap.
White 2001 ZX3
17" FRPP White Rally Wheels, KW Cup Kit (1.6" , Progress 22mm Rear Sway, Short Ram Intake w/K&N Cone, Steeda 65mm TB, Ported 2k Manifold, FRPP 9mm Wires, MAC UDP, Clear Markers, OBX 4-1 Shorty Header, OBX ORP, FS Flex, 2nd Gen. MBRP Exhaust, FS/SCT Multi Chip
My Focus
My Photography
Posts: 2,781
Threads: 215
Joined: Dec 2004
Reputation:
0
people need to speak up because i need brakes real soon, if not ill have to order them locally.
'05 Grand Cherokee LTD Hemi
'02 black ZX5 ****currently on jack stands my parents garage missing a transmission****
--FC/OBX 4-2-1 Race Header--FS Flex--MBRP catback exhaust--AEM CAI--Brembo Brakes with Hawk HPS pads--Toucan(ractive) 9mm Plug wires--FC Plug wire cover--Polished aluminum Ractive Strut Bar
Not installed: FK 60/40 Springs
Posts: 1,251
Threads: 84
Joined: Jun 2004
Reputation:
0
then start the list
copy&paste this:
Name:
Location:
Postalcode:
Pads required:
Rotors required:
Lines Required:
Fluid Required:
then fill in your info and post it.
Posts: 2,781
Threads: 215
Joined: Dec 2004
Reputation:
0
Name: ZX5focused
Location: Amherstburg Ontario
Postalcode: N9V 3X7
Pads required: Hawk HPS
Rotors required: Brembo Blanks
Lines Required:
Fluid Required:
'05 Grand Cherokee LTD Hemi
'02 black ZX5 ****currently on jack stands my parents garage missing a transmission****
--FC/OBX 4-2-1 Race Header--FS Flex--MBRP catback exhaust--AEM CAI--Brembo Brakes with Hawk HPS pads--Toucan(ractive) 9mm Plug wires--FC Plug wire cover--Polished aluminum Ractive Strut Bar
Not installed: FK 60/40 Springs
Posts: 60
Threads: 13
Joined: Sep 2003
Reputation:
0
Name: Wade Morris
Location: Dieppe NB
Postalcode: E1A 2E8
Pads required: hawk hps
Rotors required: Brembo Blanks
Lines Required:
Fluid Required:
Posts: 60
Threads: 13
Joined: Sep 2003
Reputation:
0
Come on there has to be at least 3 more people who need or will soon need this stuff
Posts: 9,588
Threads: 529
Joined: Mar 2004
Reputation:
1
I'm a little tapped right now (mis-judged property taxes), but I'll take a quote with an expected pay date in reply :)
Name: Adam Weichel
Location: North Bay, ON
Postalcode: P1B 7N3
Pads required: Hawk HPS (damn near definite)
Rotors required:
Lines Required: possibly braided stainless steel, need a quote
Fluid Required: recommendations if above goes through
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"
33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.
Daily driver 2: 2006 Subaru Legacy GT
COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Posts: 60
Threads: 13
Joined: Sep 2003
Reputation:
0
So so far 3 people come on guys I was hopeing to have this stuff by the end of next week :)
Posts: 1,415
Threads: 49
Joined: May 2004
Reputation:
1
I would order but i'm going to be going with my cousin as soon as I get some cash.
2004 Ford Focus ZX5 MTX75 - Liquid Grey -
15.7 @ 86mph
1994 Pontiac Trans AM 25th Anniversary 6 spd -
12.3 @ 110mph
2013 Ford Focus ST - Oxford White
1/4 TBD
![[Image: image,Burnin1,black,blue.png]](http://www.sloganizer.net/en/image,Burnin1,black,blue.png)
Posts: 2,781
Threads: 215
Joined: Dec 2004
Reputation:
0
bump
is this dead???
im gonna need some brakes real soon.
speak up if you are interested
'05 Grand Cherokee LTD Hemi
'02 black ZX5 ****currently on jack stands my parents garage missing a transmission****
--FC/OBX 4-2-1 Race Header--FS Flex--MBRP catback exhaust--AEM CAI--Brembo Brakes with Hawk HPS pads--Toucan(ractive) 9mm Plug wires--FC Plug wire cover--Polished aluminum Ractive Strut Bar
Not installed: FK 60/40 Springs
Posts: 192
Threads: 24
Joined: Nov 2004
Reputation:
0
Im in for it.
Name: Norman Hayton
Location: Surrey, BC
Postalcode: pick-up, no shipping needed
Pads required: Hawk HPS ( front)
Rotors required: brembo blanks (front)
Lines Required:
Fluid Required:
'04 liquid grey ZX3 - my FSP auto-x car
'02 infra-red SVT - my street car, now for sale
Posts: 1,251
Threads: 84
Joined: Jun 2004
Reputation:
0
not done, just waiting for you guys to get yourselfs organaized...
this is what i got so far...
Name: Adam Weichel
Location: North Bay, ON
Postalcode: P1B 7N3
Pads required: Hawk HPS (damn near definite)
Rotors required:
Lines Required: possibly braided stainless steel, need a quote
Fluid Required: recommendations if above goes through
Name: ZX5focused
Location: Amherstburg Ontario
Postalcode: N9V 3X7
Pads required: Hawk HPS
Rotors required: Brembo Blanks
Lines Required:
Fluid Required:
Name: Wade Morris
Location: Dieppe NB
Postalcode: E1A 2E8
Pads required: hawk hps
Rotors required: Brembo Blanks
Lines Required:
Fluid Required:
Name: Norman Hayton
Location: Surrey, BC
Postalcode: pick-up, no shipping needed
Pads required: Hawk HPS ( front)
Rotors required: brembo blanks (front)
Lines Required:
Fluid Required:
As for fluid, we recommend and install the ATE fluid in all of our and our customer cars. Same fluid run in Turbo 911s, normal Porsches, Lamborgini's(sp), Lotus and other highend European sports cars... and it's ABS safe. Also has dry and wet boiling points almost 100% higher than many standard brake fluids.
Posts: 2,014
Threads: 193
Joined: Sep 2003
Reputation:
0
Hmm, sounds interesting...
Bleeding Ford Blue again...
Posts: 2,781
Threads: 215
Joined: Dec 2004
Reputation:
0
Drivesthebeast,Jun 28 2006, 06:46 PM Wrote:Hmm, sounds interesting...
[right][snapback]195815[/snapback][/right]
c'mon, we need one more guy
you know a nice set of new rotors and pads would look great under those new wheels.....lol
'05 Grand Cherokee LTD Hemi
'02 black ZX5 ****currently on jack stands my parents garage missing a transmission****
--FC/OBX 4-2-1 Race Header--FS Flex--MBRP catback exhaust--AEM CAI--Brembo Brakes with Hawk HPS pads--Toucan(ractive) 9mm Plug wires--FC Plug wire cover--Polished aluminum Ractive Strut Bar
Not installed: FK 60/40 Springs
Posts: 965
Threads: 107
Joined: May 2003
Reputation:
0
:( and to think i was looking for a set of hawk pads for the Ranger..... :(
My Mom Says I'm Special
Posts: 1,016
Threads: 27
Joined: May 2003
Reputation:
0
07-07-2006, 12:29 AM
(This post was last modified: 07-07-2006, 12:30 AM by BerinG.)
I would like Hawk HPS pads and Brembo blanks... but i would for sure check the shipping price first to J8R 2N5, Gatineau, QC .. what price taxe in? Thanks
ZX3T gone..
|
Hi, Guest
, Progress 22mm Rear Sway, Short Ram Intake w/K&N Cone, Steeda 65mm TB, Ported 2k Manifold, FRPP 9mm Wires, MAC UDP, Clear Markers, OBX 4-1 Shorty Header, OBX ORP, FS Flex, 2nd Gen. MBRP Exhaust, FS/SCT Multi Chip
