Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tinting Removal $$$ Can You Believe This?
#1
Just called Apple Auto Glass in Burlington to have my tinting removed this week. I figured I wouls swing over Friday afternoon to have it done on my way home.....


$225.00

:lol:

Is that not a bit high?
Reply
#2
That seems like the price to remove and re-tint....

Why would you want your tint removed?
Reply
#3
ANTHONYD,Sep 26 2006, 04:24 PM Wrote:Just called Apple Auto Glass in Burlington to have my tinting removed this week. I figured I wouls swing over Friday afternoon to have it done on my way home.....


$225.00

:lol:

Is that not a bit high?
[right][snapback]208592[/snapback][/right]

Quit whining. You're gonna be rich biatch! :rolleyes:
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#4
yea u just got a gold medal

$225 should be nothing 4 ya :D
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#5
that is about right for the cost.but do it urself man. get a nice sunny day and spray the windows with a dish soap and water mixture. place black garbage bags on the inside of the glass (make sure u cover all the glass. close the doors, and wait about an hour or 2. if it doesnt all come off keep doin it. its your call man. dish out a little cash or a little time.
Reply
#6
ANTHONYD,Sep 26 2006, 04:24 PM Wrote:Just called Apple Auto Glass in Burlington to have my tinting removed this week. I figured I wouls swing over Friday afternoon to have it done on my way home.....


$225.00

:lol:

Is that not a bit high?
[right][snapback]208592[/snapback][/right]

You can say that again. Jesus I could get my car tinted for that price :blink:

NefCanuck
Reply
#7
For those who care:


TINT REMOVAL DIY
Reply
#8
Reading closer it looks like you have to sandwich the tint between black bags and soapy water. Get it good and hot and peel away with amonia.

Could I not do the same with my heat gun? would it not save a whole whack of time.

Second question....do you guys think "GOO-GONE" will work on tint adhesive?

I'll do a good write up for you guys when I decide to tackle this job.
Reply
#9
ANTHONYD,Sep 26 2006, 04:51 PM Wrote:Could I not do the same with my heat gun? would it not save a whole whack of time.

Second question....do you guys think "GOO-GONE" will work on tint adhesive?
[right][snapback]208604[/snapback][/right]

Only issue I could see with the heat gun is that you might crack the glass if you aren't careful, otherwise I would agree that the heat gun might be an option...

Unsure about whether Goo-Gone can get rid of the tint adhesive. Tint adhesive once cured is pretty tough stuff...

NefCanuck
Reply
#10

^^^my biggest worry.

Having an adhesive stuck to my windows I can't get off.
Reply
#11
ANTHONYD,Sep 26 2006, 04:56 PM Wrote:^^^my biggest worry.

Having an adhesive stuck to my windows I can't get off.
[right][snapback]208609[/snapback][/right]

get laquer thinner. Guranteed to remove tint/tint adhesive and any plastic in the near vicinity.

I've watched guys retint my windows before.. didn't seem too difficult for them to remove the tint and reapply..
Contribute to focuscanada.net's future!

Donations of $20 and over get a custom title!







Reply
#12
Adhesive, no problem. Get a small can of Goo-Gone and it will take off any glue! Crappy Tire sells it!
Silver 05 ZX4 SES

RPM Black 501 18X7, Falken 215/35/18's, MBRP Stainless Cat-Back Exhaust Gen 2, FocusSport Header and Flex, Eibach Sportlines, Eibach Struts & Shocks, Eibach Sway Bars, AEM Cold Intake, FocusSport Strut Bar, Pioneer Head Unit, Boston 6.5 for Doors, Speedhut White Face Gauges, Momo Pedals, Crystal Clear Bumper Lenses, Niken Shorty Antena, Tint. RS Widebody Kit Ready for 2010...!


Fat Guy in Small Car...
Reply
#13
Got mine removed in my GTI for $20. Can't remember the name of the place though. I think it was in brampton at Steeles & Bramalea Road.

Reply
#14
Alien-Tek,Sep 26 2006, 07: Wrote:Got mine removed in my GTI for $20. Can't remember the name of the place though. I think it was in brampton at Steeles & Bramalea Road.
[right][snapback]208630[/snapback][/right]


Hmm.

I guess I could shop around.

I was expecting 50 bucks :lol:

but 225.00?

I asked the guy if he was serious.

:lol:
Reply
#15
focuzedn2o,Sep 26 2006, 04:41 PM Wrote:that is about right for the cost.but do it urself man. get a nice sunny day and spray the windows with a dish soap and water mixture. place black garbage bags on the inside of the glass (make sure u cover all the glass. close the doors, and wait about an hour or 2. if it doesnt all come off keep doin it. its your call man. dish out a little cash or a little time.
[right][snapback]208598[/snapback][/right]

exactly what I did to remove the tint on the Justy. worked well, I found the instruction using google.
[Image: ncclogo.jpg]
Reply
#16
Hmmm.

Not sure it;s going to be warm enoght this weekend out to do it myself.

14 degrees.

brrr.
Reply
#17
ANTHONYD,Sep 27 2006, 11:51 AM Wrote:Hmmm.

Not sure it;s going to be warm enoght this weekend out to do it myself.

14 degrees.

brrr.
[right][snapback]208779[/snapback][/right]

If you clear enough space in your garage and run a space heater at least two hours before hand, I'll bet you get the temperature in that garage up to the mid twenties n/p

NefCanuck
Reply
#18
My advice... do it yourself. It's not like you're worrying about scratching the tint.. you want it to get the heck off your windows. That's more than what I paid to have my tint done in the first place
Does a shorty anntena count as a mod?? Wink
2006 ZX5 UV red with SAP package

"Two things in life are infinite: the universe and human stupidity; and I'm not so sure about the universe"
Reply
#19
It's the rear window I'm worried about.

Maybe I'll do all the other ones and then take the rear to the pros.
Reply
#20
your a sick fawk anthony......................

WHEN THE RIVER RUNS RED...TAKE THE DIRT ROAD INSTEAD
TEAM PITA Don't settle for a wannabe, only accept the real deal.

One day I will rule the world. For now, I have to settle for this place.
Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)