Posts: 7,314
Threads: 381
Joined: Apr 2006
Reputation:
0
02-26-2007, 10:20 AM
(This post was last modified: 02-26-2007, 10:44 AM by NikiterZTS.)
when im gonna be changing my winter set back to summer rims
im planning to paint my calipers and rear drums
now my car is liqued gray, so not every color out there is gonna go with it to match
another thing...what are good brake paints out there? i went to CT the other day and found one brand the one on the pic of the cans
black and silver were my primary picks from colors....not so sure about the one on the far right
just let me know what color you think i should paint them
and should i get brake cleaner before i start to paint?
*hints please
thanks
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Posts: 9,627
Threads: 938
Joined: May 2003
Reputation:
0
Painted calipers make Baby Jesus cry.
Rice it up!
Go with black.
Posts: 7,314
Threads: 381
Joined: Apr 2006
Reputation:
0
no!
nothing ricie
i want it to look stealthy and blend with the car
that means (no red,blue,yellow, ect)
here's the closes i can show how my rear drums look like with the rims on
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Posts: 9,104
Threads: 411
Joined: May 2003
Reputation:
2
Posts: 9,627
Threads: 938
Joined: May 2003
Reputation:
0
I ususally do the following each year when I put the summer rubber. I didn't last year because I just don;t care about the car anymore.
Take a good wire brush and scrape all the rust off, best you can.
Blow off all the rust dust and chunks off with an air hose.
Prime and paint the drums black with either caliper paint or BBQ paint (it's the same s*** and is way cheaper)
Let sry and repeat coats of black.
Posts: 7,314
Threads: 381
Joined: Apr 2006
Reputation:
0
this is prob a stupid quastion...but what kind of prime?
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Posts: 1,042
Threads: 116
Joined: Dec 2006
Reputation:
0
tremclad and black
Ford Focus SES ZX5
Blue Underglow, Clear Corners, Shorty antenna, vogtland springs , Rust Module,Truebendz 2.5 ss magnaflow and Fuzion 205/50/16 HRI's
TEAM DURATEC # 99
Posts: 440
Threads: 22
Joined: Jun 2005
Reputation:
0
Black will look very good.
Posts: 340
Threads: 41
Joined: Sep 2006
Reputation:
0
Definately black, did mine in black, looks better than rust.
Posts: 7,019
Threads: 347
Joined: Apr 2004
Reputation:
6
Just use the high heat enamel paint for BBQ's or fireplaces and you won't need a primer.
TEAM PITA Don't settle for a wannabe, only accept the real deal.
One day I will rule the world. For now, I have to settle for this place.
Posts: 663
Threads: 38
Joined: Jul 2006
Reputation:
0
So i guess u just told me what color i should paint my calipers to then :lol:
02' SONIC BLUE, SVTF #2686 OF 4788
K&N FIPK
SCT XCAL-2 POWERED BY STEEDA
SCREAMIN' DEMON COIL PACK & LIVEWIRES
STEEDA STRUT TOWER BRACE (SONIC BLUE)
STEEDA STS
STEEDA REAR POLY MOTOR MOUNT
DEI HEADER WRAP
MBRP 2.5" EXHAUST
EBC GREENSTUFF PADS
EBC SLOTTED AND DIMPLED ROTORS
RUSSELL STEEL BRAIDED LINES
EURO SVT RIMS 17" General Exclaim UHP
ALPINE H/U
Winter package includes Euro SVT RIMS with Nokian WR'S
Posts: 7,314
Threads: 381
Joined: Apr 2006
Reputation:
0
i guess black BBQ paint it is then...
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Posts: 2,547
Threads: 54
Joined: May 2004
Reputation:
1
Ya definately go with black.
Current
09 F150 SCREW 4X4 XTR
Former
Show
Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp
Go
Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads
Posts: 7,485
Threads: 173
Joined: Apr 2005
Reputation:
2
Aside from black, has anyone tried a colour like silver? Black would just look bad on my Focus with the red paintjob...
NefCanuck
Use this stuff-sticks to your rusty parts like grim death on a Kamikaze
POR 15
And go basic black.
Posts: 481
Threads: 20
Joined: Feb 2007
Reputation:
0
POR 15 is awsome!!! buy the kit and rust proof a bunch of stuf and never touch it again! it's a stupid hard surface and is resistant to heat and will protect anything,,,
I could List my mods.. my times and even my future mods here.. but there the same as yours.. with a little less conversation and a lot more action!
Posts: 7,314
Threads: 381
Joined: Apr 2006
Reputation:
0
that sounds good as well...where can i pick it up?
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Posts: 4,037
Threads: 305
Joined: Jun 2003
Reputation:
9
I used that duplicolour wheel laquer, it worked ok, the rust still comes through if the calipers already rusted.. That POR-15 looks like some good stuff tho I may try that when I repaint mine.
I painted my drums black and the calipers sliver
NikiterZTS,Feb 26 2007, 06:22 AM Wrote:that sounds good as well...where can i pick it up?
[right][snapback]228175[/snapback][/right]
Stevens Auto Electric & Machine Ltd.
Authorized Distributors of POR-15 Products
591 Main Street West, Grimsby, Ontario
Posts: 7,314
Threads: 381
Joined: Apr 2006
Reputation:
0
Ian are you saying i have to order that stuff?
any idea of the price?
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
|