Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What Caused This..
#1
[Image: wtfrn5.th.jpg]

Went for a boot with a buddy to adventure somewhere cool, and decided to jump out and snap a few pics of my car, for a "recent" view, I liked how dirty it was ;)

After my first picture I looked at my camera's LCD and noticed a wicked dent, so I looked up and noticed the same dent real time in my fender..

What the fawk?

I checked for paint, didn't see any exchange .. Anyone have any idea how this happened? Hit and run? Door? Reverse into my car..? Kick? Bat? What :|

I don't know.. Looks like I need 2 new fenders now, my other one has a dent from my mom driving into my house :|

Anyone know of a good aftermarket pair of fenders that fit well ? I know that the fiberglass Z3/4 fenders tend to fit awkward, I want something more straight forward that doesn't require alot of fitment issues.. Something I can do in my driveway, paint at a buddies, and not have it be 2 inches from the door :P

And pref something not like 800 bucks for a pair.. lol..

Or anyone have a pair of fenders? ;) Pref. in Liq Grey? :D
[Image: rivalphotographygf0.jpg]
Reply
#2
Hit n run, but with what? It's almost definitely a "soft impact"... no paint, no scratches. Parked near any lumber or grocery stores lately? That's how I got the worst ding on our old sedan... hit-n-run shopping cart extravaganza.
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#3
a lil angry x-girlfriend?
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#4
WOW that sux it's right on the body line a real PITA to fix... it's huge too.. MAN sh##ty buzz... if I had a fender I'd give it to you...
[Image: forumsig.jpg]

I could List my mods.. my times and even my future mods here.. but there the same as yours.. with a little less conversation and a lot more action!
Reply
#5
I also noticed the crack in my bumper has gotten significantly bigger, it's now up past the top of the lower grill, def. not fixable, at least permanently..

Looks like a pair of fenders and a bumper are in order..

If I break a lens somehow, I think I'll just look at the 06 conversion lol..

Any other idea's on what I should do..? I don't 100% care about this car looking mint, as it'll probably get damaged again.. but I don't want it to be so obviously damaged :|..

[Image: rivalphotographygf0.jpg]
Reply
#6
I got dinged in the EXACT same place a coupke of years ago. I managed to suck most of the dent out with a plunger and hid the rest with a good buff and wax. You can hardly notice it anymore.
Reply
#7
^^ I must say I've never notice ANY marks on Anthony's car :lol
2004 Ford Focus ZX5 MTX75 - Liquid Grey -

15.7 @ 86mph

1994 Pontiac Trans AM 25th Anniversary 6 spd -

12.3 @ 110mph

2013 Ford Focus ST - Oxford White

1/4 TBD
[Image: image,Burnin1,black,blue.png]
Reply
#8
That's the idea.
Reply
#9
ANTHONYD,Mar 29 2007, 06:43 AM Wrote:I got dinged in the EXACT same place a coupke of years ago. I managed to suck most of the dent out with a plunger and hid the rest with a good buff and wax. You can hardly notice it anymore.
[right][snapback]232374[/snapback][/right]

A plunger like ... a toilet one? Lol..

What kind? :|

[Image: rivalphotographygf0.jpg]
Reply
#10
ex1z7,Mar 29 2007, 05:32 PM Wrote:
ANTHONYD,Mar 29 2007, 06:43 AM Wrote:I got dinged in the EXACT same place a coupke of years ago. I managed to suck most of the dent out with a plunger and hid the rest with a good buff and wax. You can hardly notice it anymore.
[right][snapback]232374[/snapback][/right]

A plunger like ... a toilet one? Lol..

What kind? :|
[right][snapback]232431[/snapback][/right]


Ya that usually will work. Just be smart with it, dont smash it against your dent lol
2000 ZX3
Reply
#11
I'm sorry to here that, I know where your coming from though, I've had replace both fenders due to people hitting them with there car doors. I got basically new fenders from Dom's Auto Wreckers in Candice, Ontario. 140.00 for the fender 150-170 to get it painted black. Put it on myself. One word of warning, the passenger side is a bitch! The windshield wiper reservoir is in the way of putting on a bolt.

Good luck,

Shawn Bailey
Performance & Cosmetic: Steeda Cold Air intake // Steeda 65mm throttle body // MBRP FlexBack exhaust // Steeda STS with hand made (by me) leather boots // tinted rear & triangles limo, doors 35%
Audio: Pioneer DEH P4700MP, larger JBL Door speakers, JBL amp and 10" JBL sub.
Next Mods: Front strut bar // rear engine mount // SCT Xcal 2 // Stage 1 Crane cams // SVT suspension // 17" rims.

Pics

http://www.angelfire.com/ultra2/gamers/my_...index.album?i=1
Reply
#12
The Mailman 666,Apr 11 2007, 01:59 AM Wrote:I'm sorry to here that, I know where your coming from though, I've had replace both fenders due to people hitting them with there car doors. I got basically new fenders from Dom's Auto Wreckers in Candice, Ontario. 140.00 for the fender 150-170 to get it painted black. Put it on myself. One word of warning, the passenger side is a bitch! The windshield wiper reservoir is in the way of putting on a bolt.

Good luck,

Shawn Bailey
[right][snapback]234192[/snapback][/right]

for the record, the 2005-2007 Focus has the washer bottle on the passenger side
the 2000 - 2004 has the washer bottle on the driver's side.

It's not that hard to replace the Focus fenders, I did mine and the wiring for the repeaters on my Euro fenders in less then an hour, it's about 9 bolts to undo and then it's just a matter of pulling it off.

I have a Stock passenger fender for sale if your interested in it, but it's Yellow.
I was the only member on this board with a Yellow Focus Sedan, and a 2002+ Euro Facelift on a sedan.
Reply
#13
I had a dent like that. It was from a kids head who decided to try to outmuscle an RCMP and got pretty much DDT'd into my fender in the theatre parking lot. I was like WTF?? Cop was like shut the f... up. I looked at the crumpled kid on the ground and said OK but who's gonna fix my fender? Make a report. So I did. RCMP never fixed it. It was funny as hell to see though.
No name, Cheap and Slutty.

MMM Daddy Like
Reply
#14
ok id put my foot through the cops fender, id take it to court , he dented mine I dented his.
Ford Focus SES ZX5
Blue Underglow, Clear Corners, Shorty antenna, vogtland springs , Rust Module,Truebendz 2.5 ss magnaflow and Fuzion 205/50/16 HRI's
TEAM DURATEC # 99
Reply
#15
That side got drilled by a flying sign in a windstorm before the court date so insurance fixed it afterall.
No name, Cheap and Slutty.

MMM Daddy Like
Reply
#16
haha it would be funny to see tho , did he get up and claim his wwe belt ?
Ford Focus SES ZX5
Blue Underglow, Clear Corners, Shorty antenna, vogtland springs , Rust Module,Truebendz 2.5 ss magnaflow and Fuzion 205/50/16 HRI's
TEAM DURATEC # 99
Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)