Hi, Guest
I've got an '05 zx4, want to drop it about 1.4'-1.6' was looking at the eibach pro-kit. Has anyone done it yet? Any other suggestions? I also run 205/55/16 instead of 205/50 will they rub with this drop? Any idea where i can get a good deal on parts? Going to install myself. Thanks
Thread Rating:
|
Suspension Quetion
|
05-26-2007, 08:38 AM
i got the sportlines on my 07 st and have 225/35/18 tires, i dont rub, you should not have any problems.
05-26-2007, 08:39 AM
Why are you running a larger diameter tire? Do you find that the speedo is off? I have just bought the Pro-Kit from another member on here and I am getting it installed very soon. As to where you can get it, I don't know. But you can check at a local speed shop or Canadian Tire.
Focus man, Focus........ Team Psychological Disaster
2008 Taurus X to be modded. 2002 ZX5 parted out. Forever known as the "SLOCUS". 2010 Dyno #'s 102.96HP/105.84TQ 2011 Dyno #'s 111.44HP/115.17TQ Still The Weakest Link  Dial 1-800-AUTO-PARTS for your local speed shop.
05-26-2007, 08:40 AM
i got my sportlines for 280 taxes in, in london at unauthorized performance.
05-26-2007, 10:48 AM
Many of us on here have had good experience with the Pro-Kit - myself included.
Make sure you get the correct kit though - Ford changed the front springs part way through the '05 model year and they are not interchangeable. Always a good idea to shop around - I buy a lot of stuff in the states and have it sent to my PO box in Niagara Falls and I can usually save a few bucks that way. If you're interested I can quote you a price but you'd have to be prepared to wait a couple of weeks to get it. If you're on stock rims you should have no problem at all with rubbing - I have 215-45-17s on 7.5" wide rims (42 offset) and I've had no rubbing. zx4_ses,May 25 2007, 05:01 PM Wrote:I've got an '05 zx4, want to drop it about 1.4'-1.6' was looking at the eibach pro-kit. Has anyone done it yet? Any other suggestions? I also run 205/55/16 instead of 205/50 will they rub with this drop? Any idea where i can get a good deal on parts? Going to install myself. Thanks
2008 Fusion SEL MTX - DD1 * 2009 Fusion SEL - DD2 * 2007 Focus ZXW - R*I*P * 2004 Focus ZTW CD Silver - sold * 2004 Focus ZTW Black - sold * 2003 Focus ZTW Black - sold * 2001 Focus ZTW Gold - sold * 2000 Focus SE Wagon (ZTW option) - Black - sold * 2000 Focus SE Wagon (ZTW option) - Gold R*I*P
2003 Focus ZX5 infra-red Track Rat - R*I*P 2003 ZX5 CD Silver Track Rat - retired, but still in the driveway New track rat: 2000 ZX3, Atlantic Blue * JRSC with lots more to come * New Zetec crate motor - NFG - thanks Topspeed *   Drivesthebeast,May 26 2007, 04:31 PM Wrote:SHM/Multimatic Kit...instead of the Pro Kitevery multimatic kit I have seen doesnt look like much of a drop at all... kind of like comparing regualr suspension to an svt.. I was thinking of going AGX/PROGRESS pairing for my car..It seems like a good combo of drop and performance from what Ive seen and heard
2001 ZX3..
Mods - Coming Soon Tinited with Skull decal on front bumper passenger side.
05-29-2007, 09:00 AM
My Multimatic kit was a 1.25" drop up front, and 1.75" rear...that was just fine for me, and I had 215/45 17 tires and wheels under the car that did NOT rub, and the car itself required no modifcation to make the larger wheels fit to do this. Also, I was still able to drive the car year round. If I had slammed it, then it would have been a paperweight until summer...
Bleeding Ford Blue again...
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)