Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pic's-wungunsvt's Svt/rs/f2 Detailed With Lighting
#1
It's been awhile since I've been on (I need to come on more often, I know!)
But here are some updated pic's on the car...

Body-colour wiper wings? Not too sure about this one...
[Image: BladeWings002.jpg]

[Image: BladeWings001.jpg]

Out basking in the late afternoon sun...
[Image: Pics1017.jpg]

[Image: Pics1016.jpg]

[Image: Pics1011.jpg]

After 2 coats of sealant and 2 layers of wax...
[Image: Carwash2015.jpg]

[Image: Carwash2014.jpg]

[Image: Carwash2013.jpg]

[Image: Carwash2011.jpg]

Custom built 3rd LED brake light
[Image: led001.jpg]

[Image: BrakeLight022.jpg]

[Image: BrakeLight019.jpg]

[Image: BrakeLight018.jpg]

Night shot with LED parking/blue LED fog halos
[Image: Pics1019.jpg]

Day shot with Amber LED halo's and LED parking/signal lights
[Image: Lights-Night025.jpg]

[Image: Lights-Night016.jpg]

...now with the LED fogs on...
[Image: Lights-Night022.jpg]

[Image: Lights-Night020.jpg]

[Image: Lights-Night008.jpg]

[Image: 160510.png]
[Image: 160577.png]
Reply
#2
Interior pieces painted Sonic Blue...
[Image: HID%20LEDghts019.jpg]

[Image: Lights005.jpg]

[Image: HID%20LEDghts016.jpg]

VERY up close shot of the FX HID projector beam pattern
[Image: latest019.jpg]

[Image: latest018.jpg]

Custom made side triangles (LED of course!) They run parking/signal function, so they are always lit, similar to Acura TL's
[Image: newlights011.jpg]

[Image: newlights010.jpg]

The Ford Edge wiper blade...
[Image: newlights007.jpg]

[Image: newlights006.jpg]

Euro grill (note the component boxes in behind with the large heatsinks for the fogs)
[Image: newlights005.jpg]

[Image: newlights004.jpg]

Build shot of the front signal...
[Image: Signals009.jpg]

[Image: Signals012.jpg]

[Image: Signals005.jpg]
[Image: 160510.png]
[Image: 160577.png]
Reply
#3
Component boxes that house all the voltage regulators, PWM for the parking lights, and heatsink to keep 'em all happy (note the blue Molex connextors!)
[Image: Box003.jpg]

[Image: Box002.jpg]

[Image: Second010-1.jpg]

[Image: Second011-1.jpg]

Got bored, so I built an LED dome light...
[Image: Dome011.jpg]

[Image: Dome009.jpg]

[Image: Dome007.jpg]

[Image: Dome005.jpg]

[Image: Dome003.jpg]

My next LED project..anyone guess what it'll be??
[Image: S-Flux001.jpg]

[Image: S-Flux004.jpg]

[Image: S-Flux003.jpg]


[Image: 160510.png]
[Image: 160577.png]
Reply
#4
Foglight build pics...
[Image: Second016.jpg]

[Image: Second017.jpg]

[Image: Second018.jpg]

[Image: Second019.jpg]

[Image: Second021.jpg]

[Image: second024.jpg]

[Image: second026.jpg]

[Image: second028.jpg]

[Image: second033.jpg]

[Image: second032.jpg]
[Image: 160510.png]
[Image: 160577.png]
Reply
#5
Wow you must have taken some electroinics courses in school. Very nice. I like the rs kit.
[Image: style2,duratec-spc-power.png]
Reply
#6
snorcus,Aug 30 2007, 02:20 PM Wrote:Wow you must have taken some electroinics courses in school. Very nice. I like the rs kit.
[right][snapback]247998[/snapback][/right]


Nope, not at all....'tis the power of the internet my friend! :)
[Image: 160510.png]
[Image: 160577.png]
Reply
#7
Very nice ride my freind!

Where did you get the wheels?
[Image: ncclogo.jpg]
Reply
#8
Flofocus,Aug 30 2007, 02:41 PM Wrote:Very nice ride my freind!

Where did you get the wheels?
[right][snapback]248000[/snapback][/right]

I ordered them in from Sean Hyland Motorsports in Woodstock...
$132 each I might add!
[Image: 160510.png]
[Image: 160577.png]
Reply
#9
Fawk that thing is crazy! What a nice ride, the only negative thing is could say about is it needs some Mach HID's or ST170's. Other than that its FANTASTIC! Great work with the LED's, especially with no previous wiring experience.
Reply
#10
I like the Edge wiper and arm. Thought it would look too bulky but it looks good.
[Image: style2,duratec-spc-power.png]
Reply
#11
WuNgUnSVT,Aug 30 2007, 03:01 PM Wrote:
Flofocus,Aug 30 2007, 02:41 PM Wrote:Very nice ride my freind!

Where did you get the wheels?
[right][snapback]248000[/snapback][/right]

I ordered them in from Sean Hyland Motorsports in Woodstock...
$132 each I might add!
[right][snapback]248001[/snapback][/right]

What brand/what are they called? Doesnt look like SHM has any....well not on their website anyways.
[Image: ncclogo.jpg]
Reply
#12
Nice work, the car looks great!
'14 Escape 2.0t
2012 5dr Ti : Traded
Reply
#13
Sorry, I misled you I think....
Thay are off the RS Focus in europe...you need to get them thru the Ford Racing Parts catalog.
They were made my O.Z. Racing, and they are beautiful...simple...elegant...


Flofocus,Aug 30 2007, 04:05 PM Wrote:
WuNgUnSVT,Aug 30 2007, 03:01 PM Wrote:
Flofocus,Aug 30 2007, 02:41 PM Wrote:Very nice ride my freind!

Where did you get the wheels?
[right][snapback]248000[/snapback][/right]

I ordered them in from Sean Hyland Motorsports in Woodstock...
$132 each I might add!
[right][snapback]248001[/snapback][/right]

What brand/what are they called? Doesnt look like SHM has any....well not on their website anyways.
[right][snapback]248008[/snapback][/right]
[Image: 160510.png]
[Image: 160577.png]
Reply
#14
If you decide to make an extra set of LED rears and they're fairly easy to weasel into the stock housings... let me know. :)
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#15
NOS2Go4Me,Aug 31 2007, 07:33 AM Wrote:If you decide to make an extra set of LED rears and they're fairly easy to weasel into the stock housings... let me know. :)
[right][snapback]248040[/snapback][/right]

It won't be that easy...I'm planning on opening the tails right apart, and mounting boards in there, not just bulb look-a-likes...
[Image: 160510.png]
[Image: 160577.png]
Reply
#16
WuNgUnSVT,Aug 31 2007, 08:17 AM Wrote:
NOS2Go4Me,Aug 31 2007, 07:33 AM Wrote:If you decide to make an extra set of LED rears and they're fairly easy to weasel into the stock housings... let me know. :)
[right][snapback]248040[/snapback][/right]

It won't be that easy...I'm planning on opening the tails right apart, and mounting boards in there, not just bulb look-a-likes...
[right][snapback]248045[/snapback][/right]
I like what you've done to your car, looks great!!
I have a Sedan, okay, it's not as exciting as a hatch, but I posted a couple of weeks ago about putting LED taillights on it. Since you've done a fair bit of LED work, maybe you can point me in the right direction as to how to do it?
Proud member of the CDan nation.
2000 White ZTS: retired
2012 Frosted Glass SEL: active
K&N Filter.....
Reply
#17
WuNgUnSVT,Aug 31 2007, 08:17 AM Wrote:
NOS2Go4Me,Aug 31 2007, 07:33 AM Wrote:If you decide to make an extra set of LED rears and they're fairly easy to weasel into the stock housings... let me know. :)
[right][snapback]248040[/snapback][/right]

It won't be that easy...I'm planning on opening the tails right apart, and mounting boards in there, not just bulb look-a-likes...
[right][snapback]248045[/snapback][/right]

Ahh, gotcha. Have fun :D

I'm not in a huge rush for new tails... I just want them to look stock. :)
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#18
HOLY BATMAN LED MANIAC!!! :D :D
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#19
oldeguy,Aug 31 2007, 08:58 AM Wrote:
WuNgUnSVT,Aug 31 2007, 08:17 AM Wrote:
NOS2Go4Me,Aug 31 2007, 07:33 AM Wrote:If you decide to make an extra set of LED rears and they're fairly easy to weasel into the stock housings... let me know. :)
[right][snapback]248040[/snapback][/right]

It won't be that easy...I'm planning on opening the tails right apart, and mounting boards in there, not just bulb look-a-likes...
[right][snapback]248045[/snapback][/right]
I like what you've done to your car, looks great!!
I have a Sedan, okay, it's not as exciting as a hatch, but I posted a couple of weeks ago about putting LED taillights on it. Since you've done a fair bit of LED work, maybe you can point me in the right direction as to how to do it?
[right][snapback]248047[/snapback][/right]

Here is where I started, and I recommend everyone go check it out if your into any sorta automotive lighting...

http://www.hidplanet.com/forums/

[Image: 160510.png]
[Image: 160577.png]
Reply
#20
:headbang: Great job, car looks fantastic!!!
Reply


Forum Jump:


Users browsing this thread: 16 Guest(s)