Posts: 419
Threads: 30
Joined: May 2010
Reputation:
0
I just purchased a brand-new, boxes never opened SVT kit for $300 cdn, which he also drove for four hours to deliver. (Thanks Will wherever you are!!!)
I've been told with my 2000 SPI Focus has a front sway bar that is skinnier then most Focus models. And if I hook up the rear sway bar, the rear-end will come around something fierce.
Should I pull another sway bar off a different model Focus, or would an aftermarket one be better? I'm not really looking forward to pulling one off in my local scrap yard, but don't want to pay a small fortune either. Also would there be any problem driving with the SVT struts and springs without the rear sway bar. I need this car on the road!
Posts: 1,566
Threads: 72
Joined: Sep 2005
Reputation:
2
From everything I've read, you can get one from any non-SPI 2000-2004 Focus (they are all the same). I believe they are 21mm, if I remember correctly.
Ryan and the Silver Sedan
++++++++++++++++++++++++
2008 Mazda5 GS/Copper Red Mica/2.3 MZR 5AT/22% Tint
![[Image: 49951.png]](http://www.fuelly.com/sig-metric/49951.png)
2011 Ford F150 FX4 Supercrew/Race Red/3.5 TT EcoBoost
Posts: 419
Threads: 30
Joined: May 2010
Reputation:
0
Would a thicker front be better?
Posts: 1,068
Threads: 35
Joined: Apr 2007
Reputation:
0
07-28-2010, 01:15 AM
(This post was last modified: 07-28-2010, 02:43 AM by Spinal.)
^ slightly but swapping the front sway bar is a huge PITA, and unless you go to an aftermarket one the stock one you have is 20mm...SVT is 21mm - not a huge gain and not worth the hassle IMO.
if your car doesn't have a rear sway bar already, install that - it'll make a world of difference.
Little bit of show, little bit of go.
Posts: 3,497
Threads: 235
Joined: Apr 2008
Reputation:
3
It would be a gain if the SVT bar has stronger metal in it. Won't flex as much but the size isn't a huge difference.
Installation I haven't the slightest but once you start you will never want to stop lol
Currently - 2014 GMC Sierra 1500 SLE 4X4 Work Truck. Needs a Super Charger
2012 F150 Eco Boost Work Truck < Died several times and now it's some farmer problem.
No Longer Sleeping/In Surgery Having A Heart Transplant - 2005 Focus ZX5 Sonic Blue Modified
Sold - 1992 Astro Van CS Sky Blue Stock
Sold - 1994 Excel 2DR HB Teal First Car
Posts: 2,547
Threads: 149
Joined: Jun 2008
Reputation:
2
leave front sway bar, i have a factory front with a 28.6mm in the rear and my rear end doesnt get tail happy any.
2007 ZX4 2.0l unaturally aspirated
FSwerks stage 2 Turbo kit, Cosworth Intake Manifold, 3" custom HKS turbo back
regular stage 2 @10ps : 232whp/219wtq
stage 2 plus @ 13psi: 278whp/229wtq
Stage 2 plus @15psi: 296whp/240wtq
2013 Focus ST Tuxedo Black - The daily
Posts: 4,124
Threads: 162
Joined: Mar 2005
Reputation:
2
I concurr. We did change the front on my 07 from 21mm OEM to a 22mm eibach. Not worth the hassle.
The 25mm upgrade on the rear tho. 
Sold: 2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.
Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.
Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies.
Posts: 8,622
Threads: 898
Joined: May 2003
Reputation:
6
I did the front sway bar on my focus back in the day.. it made a difference in helping to balance out some of the tail-happy characteristics of a rear swaybar with stock fronts..
The trick to the install is that you just undo the front cross member the bare minimum it takes to squeeze the swaybar in. Thank god I had help.
Contribute to focuscanada.net's future!Donations of $20 and over get a custom title!
Posts: 419
Threads: 30
Joined: May 2010
Reputation:
0
Yeah the SPI I've been told has a 18mm front bar... so the tail happy characteristics might be allot worst then one with a factory front 20mm.
Posts: 419
Threads: 30
Joined: May 2010
Reputation:
0
08-12-2010, 11:25 AM
(This post was last modified: 08-12-2010, 11:27 AM by moon111.)
With 12 hour work days, wife, four kids, dog, house work, etc.... the work wasn't getting done. So I paid someone else
to put the SVT struts, springs, and shocks in. AND IT HANDLES AWESOME. Sorry... I never write in caps. But I'm blown
away by how well it feels. This with stock 15" wheels, and no rear sway bar installed yet.
Edit: The SVT springs LIFTED the car up at least an inch over the 104k stock units.
Posts: 1,566
Threads: 72
Joined: Sep 2005
Reputation:
2
Just wait until you put some stickier tires on it... Best replacement/upgrade I ever did to my car!
I noticed that the car came up a little bit initially in height, but give it a week or so, it should settle down a bit.
Ryan and the Silver Sedan
++++++++++++++++++++++++
2008 Mazda5 GS/Copper Red Mica/2.3 MZR 5AT/22% Tint
2011 Ford F150 FX4 Supercrew/Race Red/3.5 TT EcoBoost
Posts: 419
Threads: 30
Joined: May 2010
Reputation:
0
I saw some SVT rims on Kijiji last night and am a little pissed I'm out of cash. Maybe I can feed the kids puff wheat and powdered milk for a week.
Posts: 5,384
Threads: 269
Joined: Dec 2005
Reputation:
5
I thought my car was great when new on the stock suspension. Then I picked up Eibach Pro-Kit springs and it was even better. But now with my SVT struts and Ford Racing springs I ride on rails. The SVT parts are a perfect match for our little cars. Ford really did know what they were doing when they put these kits together.
Focus man, Focus........ Team Psychological Disaster
2008 Taurus X to be modded.
2002 ZX5 parted out. Forever known as the "SLOCUS".
2010 Dyno #'s 102.96HP/105.84TQ
2011 Dyno #'s 111.44HP/115.17TQ
Still The Weakest Link
Dial 1-800-AUTO-PARTS for your local speed shop.
Posts: 515
Threads: 59
Joined: May 2009
Reputation:
2
I can vouch for the PITA doing the front sway bar is.....but it was worth every cut on my knucles
|
Hi, Guest
