Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
head gasket...
#1
Just found out officially, the head gasket is toast in my.

$1900.00 to fix!!!

WTF am I going to do?
I'm not in a position to purchase a new car yet.
bummer.
Reply
#2
get a haynes manual, a 233 piece mastercraft socket set for 100$, the head gasket and go to town on your own?
2007 ZX4 2.0l unaturally aspirated
FSwerks stage 2 Turbo kit, Cosworth Intake Manifold, 3" custom HKS turbo back
regular stage 2 @10ps : 232whp/219wtq
stage 2 plus @ 13psi: 278whp/229wtq
Stage 2 plus @15psi: 296whp/240wtq

2013 Focus ST Tuxedo Black - The daily
Reply
#3
Ya seriously I would do that myself it I were you. Easy enough. Just gonna take some scrapes and a lot of loose change in the swear jar which could turn into the swear jug lol. But you can do it.
Currently - 2014 GMC Sierra 1500 SLE 4X4 Work Truck. Needs a Super Charger
2012 F150 Eco Boost Work Truck < Died several times and now it's some farmer problem.
No Longer Sleeping/In Surgery Having A Heart Transplant - 2005 Focus ZX5 Sonic Blue Modified
Sold - 1992 Astro Van CS Sky Blue Stock
Sold - 1994 Excel 2DR HB Teal First Car

Reply
#4
Did the chemicals that you use to clean your engine dissolve your head gasket? (I have seen what it has done to your "Zetec" logoBig Grin)


jk...


Time for an SVT engine and tranny swap.


jk...


Are you sure it's not just a t-stat housing leak that's running along the seams of you engine along the head gasket?
vintage 2000 malibu blue ZX3 ***SOLD***
2013 performance blue ST

TEAM P.I.T.A.
Reply
#5
I should have added that I'm having the timing belt and a bunch of other little things.
Thanks for all the PMs offering to help guys it's much appreciated.
Reply
#6
(12-03-2010, 04:39 AM)ANTHONYD Wrote: $1900.00 to fix!!!

New Zetec engine is $450, R&R is 8 hours, taking my buddies shop rate of $68/hour, $550 lets say, Under $1000 you got NEWER engine in.

Yer getting hosed at $1900 Anthony.

[Image: ncclogo.jpg]
Reply
#7
(12-03-2010, 07:18 AM)dBlast Wrote: Did the chemicals that you use to clean your engine dissolve your head gasket? (I have seen what it has done to your "Zetec" logoBig Grin)


jk...


Time for an SVT engine and tranny swap.


jk...


Are you sure it's not just a t-stat housing leak that's running along the seams of you engine along the head gasket?


Nah, they showed me the gasket and where it's been pushed out.
It's being done at a reputable shop within the family.

Reply
#8
Quote:It's being done at a reputable shop within the family.

No offence, but I'd hate to see what they would charge non family members. Thats too much for a head gasket job.
[Image: ncclogo.jpg]
Reply
#9
Lol its barely $200 in parts the rest is basically labour.
Reply
#10
$1900? Does that Focus even worth that much?
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#11
(12-03-2010, 11:47 AM)NikiterZTS Wrote: $1900? Does that Focus even worth that much?


To me it is.
Im also having my water pump replaced, timing belt done, washe fluid bote replaced, dashboard lights fixed, tranny flush and oil change, and back breaks done.



Reply
#12
Including into $1900 price?
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#13
Reman head included? FRPP..... ????
Focus man, Focus........ Team Psychological Disaster
2008 Taurus X to be modded.
2002 ZX5 parted out. Forever known as the "SLOCUS".

2010 Dyno #'s 102.96HP/105.84TQ
2011 Dyno #'s 111.44HP/115.17TQ
Still The Weakest LinkBlush

Dial 1-800-AUTO-PARTS for your local speed shop.
Reply
#14
well that changes things then if your getting all that done 1900$, still outrageous price but if your getting a crap ton of maintenance done to it, might aswell get it all done at once. i know it cost my buddy about 900 for everything u stated but head gasket
2007 ZX4 2.0l unaturally aspirated
FSwerks stage 2 Turbo kit, Cosworth Intake Manifold, 3" custom HKS turbo back
regular stage 2 @10ps : 232whp/219wtq
stage 2 plus @ 13psi: 278whp/229wtq
Stage 2 plus @15psi: 296whp/240wtq

2013 Focus ST Tuxedo Black - The daily
Reply
#15
(12-03-2010, 01:14 PM)ANTHONYD Wrote:
(12-03-2010, 11:47 AM)NikiterZTS Wrote: $1900? Does that Focus even worth that much?


To me it is.
Im also having my water pump replaced, timing belt done, washe fluid bote replaced, dashboard lights fixed, tranny flush and oil change, and back breaks done.

The head is coming off, any good mechanic will tell you to replace these things anyways since they are being removed to replace the head gasket.

I dont know - I still find that too much money to spending on the car.
[Image: ncclogo.jpg]
Reply
#16
Look at it another way though.

Assume that all the work is done @ $1,900 then divide that over a year to instead put that $ into car payments (1900 / 12 = $158.34)

Looking at it that way it doesn't seem that much to get all that work done, which will be warrantied for at least 90 days / 5,000km by law in Ontario.

'Cause unless you have a crapload of cash to put into a downpayment that amount per month isn't even going to make the monthly payments on the cheapest Elantra Hyundai sells ATM.

NefCanuck
Reply
#17
the guy quoted me between 15 and 19 hundred bucks.

And yes Dan that is why I'm fixing the car.

I'll wait till the 2012 focus RS gets here.
Reply
#18
(12-04-2010, 01:12 AM)Flofocus Wrote:
(12-03-2010, 01:14 PM)ANTHONYD Wrote:
(12-03-2010, 11:47 AM)NikiterZTS Wrote: $1900? Does that Focus even worth that much?


To me it is.
Im also having my water pump replaced, timing belt done, washe fluid bote replaced, dashboard lights fixed, tranny flush and oil change, and back breaks done.

The head is coming off, any good mechanic will tell you to replace these things anyways since they are being removed to replace the head gasket.

I dont know - I still find that too much money to spending on the car.

^^This.

Tony if you have a chance get a quote somewhere else. This is ALOT of $$$ to drop.
I just hope that mechanic is not taking advantage of your trust.
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#19
ya man... it cost me 1200$ to R&R a 50 000km engine into my car

you gotta be better off swapping the engine man...
2003 Focus ZX5 Racecar/Perma broke/Storage
2011 Volkswagen Jetta Daily Driver
Reply
#20
(12-04-2010, 04:42 AM)ANTHONYD Wrote: the guy quoted me between 15 and 19 hundred bucks.

And yes Dan that is why I'm fixing the car.

I'll wait till the 2012 focus RS gets here.

Makes sense, even if something goes wrong further down the road, in Anthony's case he can, at worst rent a car for a couple of days until the green machine is upright again.

2012 Focus RS, I hope yuor wish comes true Anthony but I'm leery of betting that Ford will bring such a niche vehicle over here. Esp. one that is likely as not to thoroughly wallop a Mustang on a track while delivering at least twice the fuel economy...

NefCanuck
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  My Head Gasket! ANTHONYD 24 9,224 04-06-2010, 09:22 AM
Last Post: ANTHONYD

Forum Jump:


Users browsing this thread: 2 Guest(s)