Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Exhaust Upgrade
#1
I have a 2002 SE Wagon.
I have to replace the exhaust, so I'm looking to upgrade.
Anyone have any suggestions?
I'm looking first for a Cat-Back to pass the cert, with the possible addition of a 4-2-1 header later on.
Thanks
Reply
#2
FSWerks, Borla. If you can still get an MBRP, get it.
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#3
I know we (MBRP) have a sedan system in stock, however that won't fit a wagon without a little bit of modification to the tailpiece.
07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
Reply
#4
nothing an exhaust shop can't fix.
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#5
(08-16-2011, 08:20 PM)MuskokaZX3 Wrote: I know we (MBRP) have a sedan system in stock, however that won't fit a wagon without a little bit of modification to the tailpiece.

So, How much would that system be?
How much modification would be required for the tail?

I tried on the MBRP site, but it doesn't show anything for the focus.
Reply
#6
Magnaflow's a decent option as well, and they should have a wagon system still available...
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#7
Yea, there won't be anything on the MBRP website about the focus... Our system was discontinued a couple years ago... However we still have a few systems lingering around... The modification to the tail is you'd just need to get a short piece welded in... The wagon rear is longer than the sedan... As for price, best thing would be to call and talk to someone... Also if you have the time I'm sure you could bring your car up here and we could fab the tailpiece up to fit right and install the system for you... Also, as mentioned borla makes a great system, magnaflow is ok... And then you can get into trubendz systems where you can choose your mufflers and resonators... There's plenty of choices... Also forgot about fswerks systems as well
07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
Reply
#8
(08-17-2011, 06:07 AM)MuskokaZX3 Wrote: Yea, there won't be anything on the MBRP website about the focus... Our system was discontinued a couple years ago... However we still have a few systems lingering around... The modification to the tail is you'd just need to get a short piece welded in... The wagon rear is longer than the sedan... As for price, best thing would be to call and talk to someone... Also if you have the time I'm sure you could bring your car up here and we could fab the tailpiece up to fit right and install the system for you... Also, as mentioned borla makes a great system, magnaflow is ok... And then you can get into trubendz systems where you can choose your mufflers and resonators... There's plenty of choices... Also forgot about fswerks systems as well

That sux about being discontinued. As the car isn't drivable right now getting it up there is difficult. I would like to pick it up and install it when I can.
I looked at the other systems by MBRP and I like the look and the fact that they're built in canada (from what I see). So if you'd be able to find something out regarding the price or at least a part number so I can call and ask.
Maybe you could get it for me at a better price than retail??
Thanks!
Reply
#9
Oh yea they're built right up here in Huntsville... The part number is S4040 for the sedan system... If you callthey could give you a shipping quote I'm sure... Or I can get some info for you tomorrow if you don't feel like calling
07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
Reply
#10
(08-17-2011, 11:42 AM)MuskokaZX3 Wrote: Oh yea they're built right up here in Huntsville... The part number is S4040 for the sedan system... If you callthey could give you a shipping quote I'm sure... Or I can get some info for you tomorrow if you don't feel like calling

I'd really appreciate it if you could get me some info.
Reply
#11
Totally forgot today... I'll see what I can dig up tomorrow!
07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
Reply
#12
If Platinum doesn't take it then depending on the price, I'll take it and make the drive to huntsville and have it installed there too.

Thanks,
2003 Focus ZX5 Racecar/Perma broke/Storage
2011 Volkswagen Jetta Daily Driver
Reply
#13
Any know the prices of the various exhausts mentioned?
Reply
#14
Haven't heard back from MuskokaZX3 ...
Hoping to hear soon.
Reply
#15
Bah sorry man... Tomorrow... I promise!!
07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
Reply
#16
If you can see if they have a zx3 exhaust still that would be pretty awesome. Would rather Have a canadian manufactured product which hopefully would actually survive life up here rather than something made for them gingerly southerners with their mild winters etc.
'03 ZX3, currently nicknamed "Clint Eastwood" (because it's good, bad, and ugly). In process of rebuild to OEM/OEM+ status.
Reply
#17
I thought I posted in thi thread after I talked to the salesman... We have ONLY 2 systems and BOTH are SEDANS... $250 picked up or we can ship at your expensive... If you wanna use a sedan system on a zx3/5/wagon the tail piece would have to be modified!
07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
Reply
#18
I'm calling tomorrow. See you guys this weekend (i hope LOL)


can you guys do install too?
2003 Focus ZX5 Racecar/Perma broke/Storage
2011 Volkswagen Jetta Daily Driver
Reply
#19
Prolly not install!
07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
Reply
#20
MBRP IS THE BEST EXHAUST SYSTEM I HAVE EVER HAD. Shame they stopped making it for the Focus. I see a new demand for a quality system coming with the '12s.
Focus man, Focus........ Team Psychological Disaster
2008 Taurus X to be modded.
2002 ZX5 parted out. Forever known as the "SLOCUS".

2010 Dyno #'s 102.96HP/105.84TQ
2011 Dyno #'s 111.44HP/115.17TQ
Still The Weakest LinkBlush

Dial 1-800-AUTO-PARTS for your local speed shop.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Exhaust Upgrade. JSkerten 7 3,093 09-05-2008, 12:27 AM
Last Post: konafocuswrc

Forum Jump:


Users browsing this thread: 2 Guest(s)