Thread Rating:
  • 7 Vote(s) - 4.43 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FINISHED!!>>>my OFFICIAL build thread
[Image: 28796e7e.jpg]
[Image: db3e2a9b.jpg]
[Image: 4352b938.jpg]

Gotta support prostate cancer
[Image: 7033f623.jpg]
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
(03-30-2012, 11:17 AM)ZTWsquared Wrote: You know Sean looking at the pic with the license plate reminds me of the Mustang I saw last year with the front license plate "stickered" onto the front bumper.

It looked exactly like the real thing - even had that kind of sparkly finish to it - but it was adhered to the bumper like a decal or sticker and it formed completely to the bumper.

If you have to have a front license plate - it seems to me that's the way to go.

Unfortunately I haven't been able to find out how to do this, or who does it.

[Image: cobralicenseplate.jpg]

Theres a guy here in Ottawa who has a kitted ferrari wannabe. Did teh same thing, had some customs ticker made for his front license plate. Cops didnt like it and gave him a ticket for improper something-a-rather.
[Image: ncclogo.jpg]
Reply
I can make you one no problem if you want one.
05 focus se SLAMMED! 5 speed tranny swap with exedy stage 3 hypersingle clutch, raceland coils, MBRP exhaust, FSWERKS stage 2 turbo kit. Massive adjusting camber, toe arms. Steeda's HUGE rear sway bar with upgraded links. Roll bar in the back no backseats. no radio and tons of gauges!

...because RACECAR! haha
Reply
The screws in the pillar pod make it look cheese. Some black plastic push in fasteners that would make that look allot cleaner, or maybe black screws....

Good job on everything else, love the headliner, just those screws..ugh.
Reply
i will deff take the into consideration thanks
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
Headliner looks really good.
Reply
Whole car looks MINT!! A+
02' SONIC BLUE, SVTF #2686 OF 4788
K&N FIPK
SCT XCAL-2 POWERED BY STEEDA
SCREAMIN' DEMON COIL PACK & LIVEWIRES
STEEDA STRUT TOWER BRACE (SONIC BLUE)
STEEDA STS
STEEDA REAR POLY MOTOR MOUNT
DEI HEADER WRAP
MBRP 2.5" EXHAUST
EBC GREENSTUFF PADS
EBC SLOTTED AND DIMPLED ROTORS
RUSSELL STEEL BRAIDED LINES
EURO SVT RIMS 17" General Exclaim UHP
ALPINE H/U



Winter package includes Euro SVT RIMS with Nokian WR'S
Reply
Damm that headliner does look good, I guess I did a damm good job lol
DruZX3 You Tube Page
My Rides on Car Domain

2001 Ford Focus ZX3 - Daily Driver
2008 Lincoln MKX Limited Edition - Grocery Getter
2007 Suzuki GSXR 600 - Rode and Sold
2004 Jeep Liberty Renegade - Offroaded and Sold
2008 Jeep Wrangler Unlimited X - R.I.P. Electrical Fire
2000 Ford Focus ZX3 - Traded in Now DrunkinMonkeys Car
2003 Ford Taurus Wagon - Inherited Drove and Sold
2000 Ford Focus ZX3 Turbo - Award Winning 336 WHP - Parted and Scraped
1990 Ford Festiva - My 1st Car

[Image: ZX3PixelCarEngineVIEW.png]
Reply
Quick shot from today
[Image: 1d09ab6d.jpg]
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
[Image: 34b8be57.jpg]
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
f**k man... That car gets me every time... Have you been on the dyno recently??
07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
Reply
Nah it's in the middle of tunes right now
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
Who's doing ur tuning?
07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
Reply
(06-13-2012, 04:12 AM)MuskokaZX3 Wrote: Who's doing ur tuning?

Randy, fswerks

i just started my tuning all over
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
so been planning some interior bits the last few weeks went and talked to a couple speaker places and gonna do justom fiberglassing on the doors and trunk and what not. not alot just enough to put a 3 way component set and the crossover and such. speakers i picked are the Audison Voce series for the doors a couple hertz amps and either W7's or W6's not sure what ones yet. ill also be redoing my head liner in the next few weeks..got some pretty good ideas for that aswell Wink so stay tuned!!!
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
Excited to see the results... Any seats planned in there?? Lol
07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
Reply
Corbeau cr1 blue. Not till spring tho
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
Next spring???
Focus man, Focus........ Team Psychological Disaster
2008 Taurus X to be modded.
2002 ZX5 parted out. Forever known as the "SLOCUS".

2010 Dyno #'s 102.96HP/105.84TQ
2011 Dyno #'s 111.44HP/115.17TQ
Still The Weakest LinkBlush

Dial 1-800-AUTO-PARTS for your local speed shop.
Reply
Yea can't afford them this season
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply
Haven't posted in a while. Not much new. With the car. Other then a few decals
Here's a few pictures from the other day

New banner :-)
[Image: 5fa20ed0.jpg]
[Image: 1453de6d.jpg]

[Image: 2ed5cf19.jpg]
[Image: 34d8c5c0.jpg]
[Image: ec1def83.jpg]
[Image: e122b8a5.jpg]
[Image: 7558d47a.jpg]
[Image: 36cce23e.jpg]
[Image: 5bdd0f7a.jpg]

Couple videos
http://i269.photobucket.com/albums/jj73/...8fe4d0.mp4
http://i269.photobucket.com/albums/jj73/...b1d976.mp4

Enjoy guys. Lemme know what you think
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Winter build thread: GFXjamie GFXjamie 131 90,322 06-20-2014, 10:42 PM
Last Post: GFXjamie

Forum Jump:


Users browsing this thread: 2 Guest(s)