[darkpuppet]

Anyone know off the top of their head what the torque specs are for KVR's two piece rotor? They don't open till 8:30am EST, and don't include instructions with the parts :rolleyes:

[darkpuppet]

the kids at kvr say 10ft-lb ..

[ANTHONYD]

darkpuppet,Jun 17 2005, 09:38 AM Wrote:the kids at kvr say 10ft-lb ..
[right][snapback]114967[/snapback][/right]

That doesn't sound very tight :blink:

[darkpuppet]

ANTHONYD,Jun 17 2005, 09:54 AM Wrote:

darkpuppet,Jun 17 2005, 09:38 AM Wrote:the kids at kvr say 10ft-lb ..
[right][snapback]114967[/snapback][/right]

That doesn't sound very tight :blink:
[right][snapback]114969[/snapback][/right]

that's what I thought... so I called back and checked again.. .then confirmed with an e-mail, then doublechecked with the ford tech, and he thinks, since it's a lot of small bolts, it should be fine.

if it isn't it sure isn't my fault :P

trust me, I'm giving everyone a chance to screw up royally so i can get me a new car :D

[ANTHONYD]

darkpuppet,Jun 17 2005, 10:01 AM Wrote:

ANTHONYD,Jun 17 2005, 09:54 AM Wrote:

darkpuppet,Jun 17 2005, 09:38 AM Wrote:the kids at kvr say 10ft-lb ..
[right][snapback]114967[/snapback][/right]

That doesn't sound very tight :blink:
[right][snapback]114969[/snapback][/right]

that's what I thought... so I called back and checked again.. .then confirmed with an e-mail, then doublechecked with the ford tech, and he thinks, since it's a lot of small bolts, it should be fine.

if it isn't it sure isn't my fault :P

trust me, I'm giving everyone a chance to screw up royally so i can get me a new car :D
[right][snapback]114974[/snapback][/right]

Get it in writing v.i.a email. :rolleyes: :ph34r:

[darkpuppet]

oh, I got it in writing....

Quote:The torque specification for the NAS bolts/ nuts is 10 Ft/Lbs

Regards,

Terry Gosse
Technical Director

good enough for me! :D

now I have nice slotted rotors on the front, and cheesy cross drilled on the rear... and when they wear out I can replace them with the oem pie plates.

[ANTHONYD]

darkpuppet,Jun 17 2005, 10:57 AM Wrote:oh, I got it in writing....

Quote:The torque specification for the NAS bolts/ nuts is 10 Ft/Lbs

Regards,

Terry Gosse
Technical Director

good enough for me! :D

now I have nice slotted rotors on the front, and cheesy cross drilled on the rear... and when they wear out I can replace them with the oem pie plates.
[right][snapback]114993[/snapback][/right]

With glitter finish. :D

[darkpuppet]

damn glitter!

[ZX3guy2000]

Oh to have discs in the back... damn drums :P

[darkpuppet]

ZX3guy2000,Jun 17 2005, 11:06 PM Wrote:Oh to have discs in the back... damn drums :P
[right][snapback]115163[/snapback][/right]

the rear discs came with advance trac.. I got the advance trac for the rear discs, not fully realizing how cool that little piece of electronic wizardry is.

but I cannot lock up my rear wheels with the e-brake... go figure.

[ANTHONYD]

darkpuppet,Jun 21 2005, 01:44 PM Wrote:

ZX3guy2000,Jun 17 2005, 11:06 PM Wrote:Oh to have discs in the back... damn drums :P
[right][snapback]115163[/snapback][/right]

the rear discs came with advance trac.. I got the advance trac for the rear discs, not fully realizing how cool that little piece of electronic wizardry is.

but I cannot lock up my rear wheels with the e-brake... go figure.
[right][snapback]115935[/snapback][/right]

So it;s worthless. The only good thing about the Focus is being able to do nice slides in the winter.

[darkpuppet]

ANTHONYD,Jun 21 2005, 01:46 PM Wrote:

darkpuppet,Jun 21 2005, 01:44 PM Wrote:

ZX3guy2000,Jun 17 2005, 11:06 PM Wrote:Oh to have discs in the back... damn drums :P
[right][snapback]115163[/snapback][/right]

the rear discs came with advance trac.. I got the advance trac for the rear discs, not fully realizing how cool that little piece of electronic wizardry is.

but I cannot lock up my rear wheels with the e-brake... go figure.
[right][snapback]115935[/snapback][/right]

So it;s worthless. The only good thing about the Focus is being able to do nice slides in the winter.
[right][snapback]115938[/snapback][/right]

well, there's the scandinavian flick, and a little trick you can do with the advance-trac. ;)

[ANTHONYD]

darkpuppet,Jun 21 2005, 01:49 PM Wrote:

ANTHONYD,Jun 21 2005, 01:46 PM Wrote:

darkpuppet,Jun 21 2005, 01:44 PM Wrote:

ZX3guy2000,Jun 17 2005, 11:06 PM Wrote:Oh to have discs in the back... damn drums :P
[right][snapback]115163[/snapback][/right]

the rear discs came with advance trac.. I got the advance trac for the rear discs, not fully realizing how cool that little piece of electronic wizardry is.

but I cannot lock up my rear wheels with the e-brake... go figure.
[right][snapback]115935[/snapback][/right]

So it;s worthless. The only good thing about the Focus is being able to do nice slides in the winter.
[right][snapback]115938[/snapback][/right]

well, there's the scandinavian flick, and a little trick you can do with the advance-trac. ;)
[right][snapback]115943[/snapback][/right]

I'm not sure I want you to show me that one, It sounds like a sex move.
<_<

[scoobasteve]

darkpuppet,Jun 21 2005, 12:44 PM Wrote:

ZX3guy2000,Jun 17 2005, 11:06 PM Wrote:Oh to have discs in the back... damn drums :P
[right][snapback]115163[/snapback][/right]

the rear discs came with advance trac.. I got the advance trac for the rear discs, not fully realizing how cool that little piece of electronic wizardry is.

but I cannot lock up my rear wheels with the e-brake... go figure.
[right][snapback]115935[/snapback][/right]

Strange....I can lock up my rear discs no problem with the ebrake.

[darkpuppet]

scoobasteve,Jun 21 2005, 05:50 PM Wrote:Strange....I can lock up my rear discs no problem with the ebrake.
[right][snapback]115998[/snapback][/right]

with the car in motion, I have not been able to make the brakes lock up on dry pavement... though I didn't really yank on it too hard.

On the other hand, the slightest yank on the e-brake puts an sx2.0 into full out rear wheel lockup.

[scoobasteve]

Where'd you get the sx 2.0 from?

[darkpuppet]

scoobasteve,Jun 22 2005, 10:51 AM Wrote:Where'd you get the sx 2.0 from?
[right][snapback]116128[/snapback][/right]

rental