Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
List Your Turbo Parts
#1
Ok so I made the decision to go back to turbo. LOL I plan on doing a custom setup. I think
a custom setup is the best way for me to learn plus way cheaper then buying Toms kit LOL.
I got a buddy who is fairly experienced in this area and he is helping me make a list of the items I need. He said I should ask some of the guys here what there list of parts includes or what parts they would go. Then do some mixing and matching of his list and others.

As for what I am after. I plan on doing a non intercool system to start off with. Nothing to serious. I would like to be pushing out 6psi just for starts. This will be my first turbo system so I dont want to go to big yet but I would like to make sure the parts I do get allow me to upgrade the turbo in the future as i gain more experience..

Now I can prolly go read and read and search but seriously Im getting tired of reading. I am the person that learns by getting the parts and just doing it LOL.
Reply
#2
Mitsu TD05 Turbo
Pro-M 70MM MAF
SCT Falsher
Bosch 42 lb fuel injectors
1gen DSM intercooler
1gen DSM Air By pass valve
SS Oil lines from http://www.Fast-Turbo.com (inlucdes whole kit including bung for oil pan)
Stage 2 Log Style header from JGS (249.99 USD, amazing deal)
2.5 Downpipe with 2.5 high flow cat
Misc Gaskets from http://www.roadraceengineering.com/hacke...rparts.htm

Check out some other links here....
http://www.yodudeperformance.com
http://www.dsmtrader.com
http://ubb.turboford.org





[Image: ncclogo.jpg]
Reply
#3
Awsome. Thanks man. Im going to shwo that to my buddy. Im sure he will understand it way better them me since Im still learning.

What is your plan for fuel management and ecu?

Keep them coming :)
Reply
#4
you can save money, and time by picking up a mustang GT MAF from the scrap yard (or even new from a dealership, it's cheaper than pro-M)... especially if you're going with the SCT software.

the maf'd avenger
Contribute to focuscanada.net's future!

Donations of $20 and over get a custom title!







Reply
#5
Another good place to start....

DIY Turbo List
Official s**t Disturber of Focuscanada.net!!!

PROUD FOUNDER of the Groß Oberlippenbart Klub
Reply
#6
Sweet. I was planning to go with the SCT chip from Steeda and thanks for the info Steve. Im going to look into that MAF. I was just figuing the ProM would be cool but if I can get the Mustang one way cheaper then why not lol
Reply
#7
thabrat,Jun 23 2004, 04:49 PM Wrote:Sweet. I was planning to go with the SCT chip from Steeda and thanks for the info Steve. Im going to look into that MAF. I was just figuing the ProM would be cool but if I can get the Mustang one way cheaper then why not lol
that, and if Steeda's burning you the chip, you definitely want a mustang GT maf instead.... there's lots of variances in the pro-m MAFs that will require tweeking of the tune (hence my purchase of wideband O2 and datalogging software).
Contribute to focuscanada.net's future!

Donations of $20 and over get a custom title!







Reply
#8
Not focus stuff but hey I want to play too.

85 XR4Ti (Race Car)
Stock Block bored 10 over.
Stock crank, rods and pistons.
ARP everything
PM Motorsports Stage 2 Head
PM Motorsports 520 lift cam.
PM Motorports Custom Intake Manifold
42lb Venom Injectors
80 MM Mustang TB
Spearco Intercooler
T3/T4 Turbo.
Ported E6 Manifold. (Soon to be replaced with an Esslinger Header)
3" Downpipe 3" Cat 3" Pipe.
PE Computer Tables

With 11.5 Air Fuel and 18PSI 321HP 358 Ft Lbs.

Soon to be 350HP & 400ft lbs with new header 12.5 Air Fuel and FAST ECU.

88XR (New car)
17yrs old Stock Everything. 74,000miles
94 Octane, 12PSI New plugs New Paper Air filter. 184HP 203ftlbs. :lol:

Turbo's are fun!! Expensive but fun. :D
I have a few cars.

One for my dog.
One that has no roof.
One that looks good parked at the golf course.
One that is being rebuilt by a guy named Nero..... will it ever be done?
Reply
#9
TD05-14B Turbo (1gen)
01+ Mustang GT Maf (maybe earlier caus i can't seem to find one)
SCT Pro Racer ;)
Motorcraft 42 lb fuel injectors
626 GT intercooler
1gen DSM Air By pass valve
Canadian tire for oil lines probably B)
Drilled Oil pan
DIY Log Style turbo manifold from local guy
2.5 Downpipe with 2.5 cat eliminator pipe.. made by moi..
Gaskets from ford.. maybe from Dodge for turbo
Stewart Warner A/F, Oil Pressure, Boost gauge.. triple pillar.

You're such a copycat Flo...
ZX3T gone..
Reply
#10
thabrat,Jun 23 2004, 12:27 PM Wrote:What is your plan for fuel management and ecu?
Quote:Pro-M 70MM MAF
SCT Falsher
Bosch 42 lb fuel injectors

:P
[Image: ncclogo.jpg]
Reply
#11
stock engine
t3 super 60
custom manifold
apr headbolts, rod studs and headgasket
g60 computer/harness (fuel)
talon 42lb injectors
1.8t intercooler (dont think ill use it though)

need fuel rail
need intake manifold
need custom burnt chip to alter fuel
need piping
need fuel pump/regulator

But blah.. I dont think im going to turbo this summer anymore. I want to go standalone now, and spent too much money on trip and doh. If i turbo i cant do suspension, and turbo car + 3/4foot wheel well gap + tons of body roll = gay.


Bering: what maf do you need .. i have a few mustang ones in my garage.
Dan, Your friendly neighbourhood asshole. Wink
I do installs and build FG stuff, pm me if you need help with anything. Im cheap.
Reply
#12
Really?! Well i didn't think there was a point in asking on here but I'm looking for a 01+ GT maf .. they are pretty rare.. scrap yards here dont even have mustangs that new..

99-00 would probably be fine too but i was looking for newer one caus the adapter is the same.. if you can find one man.. seriously, ill lick the peanuts in your sh*t

only thing im missing
ZX3T gone..
Reply
#13
I "borrowed" ... alot of mafs when i worked at the scrap yard....

Send me a part number and ill go check .. since there all over the place and i dont remember which ones which anymore.

Dan.
Dan, Your friendly neighbourhood asshole. Wink
I do installs and build FG stuff, pm me if you need help with anything. Im cheap.
Reply
#14
Oh.. ok ill look that up right away.. thanks man..
ZX3T gone..
Reply
#15
I found this on eBay and thought you might want to check it out!

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...7906972995&rd=1

Good Luck
TEAM PITA Don't settle for a wannabe, only accept the real deal.

One day I will rule the world. For now, I have to settle for this place.
Reply
#16
Ok Edit:

Lightning 99-00: 80mm XL3Z-12B579-AARM
Cobra/Lightning 01+: 90mm 1L3Z-12B579-AA


Can'T find normal GT maf part number..

Let me know which ones you got.. with -12B579- in the middle.. tell me the first numbers and i will look them up.. Thanks alot man, i really really appreciate it!
ZX3T gone..
Reply
#17
I definitely don't recommend the 2002 lightning/cobra, but if you want, I have one here, that's been modified to fit a cone filter. offer me a good price, and we can chat.
Contribute to focuscanada.net's future!

Donations of $20 and over get a custom title!







Reply
#18
darkpuppet,Jun 23 2004, 07:00 PM Wrote:I definitely don't recommend the 2002 lightning/cobra, but if you want, I have one here, that's been modified to fit a cone filter.  offer me a good price, and we can chat.
yeah im trying NOT to get a lightning or cobra maf but it seems those all the only ones EVERYONE has.. hehe

you know the part nubmer for GT?

EDIT: 2002 GT is 1L2Z-12B579-AAA

dark: you know if the 01+GT mafs are 6 wire? how bout 99-00?
ZX3T gone..
Reply
#19
wish I did... but I buckled and went with Pro-M (and why I'm buying all this other crap to make it work)...

[edit] I see you asked in the parts forum on modular depot. They may need you to clarify what you're asking for.. I've gotten part numbers off of them in the past. [/edit
Contribute to focuscanada.net's future!

Donations of $20 and over get a custom title!







Reply
#20
Hmm that ebay one is interesting but I feal sketchy about buying off ebay ever again. Specialy when it comes to turbo parts..
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Duratec Upgrade Parts List Scorcher000 3 2,877 10-13-2010, 06:30 AM
Last Post: GFXjamie
  What Parts Needed For Turbo ... zx5power 6 2,265 08-23-2007, 02:32 AM
Last Post: zx5power

Forum Jump:


Users browsing this thread: 6 Guest(s)