[nass]

if your set is like mine you'll have 3 wires. Black White and Blue. Black is ground, blue is for blue LED white is for the amber. Find a good ground I'd suggest somewhere on the car not on the door itself. Now take the blue/white wire and tap into either the side or front marker. I used the front marker since it was easier to get at. On the harness there will be 3 wires, 1 for ground 1 for signal 1 for parking light. You'll have to play around and see which wire you should tap into. make sure to seal up where you tapped into, these wires will be exposed to the elements and you don't want issues later on.

As with any mod take your time, don't cut corners and take pics :)