Hi, Guest
10-12-2004, 11:29 PM
I have the full KVR python kit with the 2 piece rotors.
The rotors are only 10.9", but the calipers are 4 piston... but are large enough to require a 3mm spacer to run the stock 16's. Don't even think about the big brake kit if you have 15's.
The brakes I find stop very well..a bit noisier with the cross drilled / CF pad combo.. lately I've been getting a bit of vibration during stops... so I'll have them inspected soon... and they had no ill-effect on the advance trac either.. .. but I really need better tires.
The rotors are only 10.9", but the calipers are 4 piston... but are large enough to require a 3mm spacer to run the stock 16's. Don't even think about the big brake kit if you have 15's.
The brakes I find stop very well..a bit noisier with the cross drilled / CF pad combo.. lately I've been getting a bit of vibration during stops... so I'll have them inspected soon... and they had no ill-effect on the advance trac either.. .. but I really need better tires.
Contribute to focuscanada.net's future!
Donations of $20 and over get a custom title!