[torradan]

NefCanuck,Apr 9 2006, 11:36 PM Wrote:

Focus man, Focus.,Apr 9 2006, 10:17 PM Wrote:

NefCanuck,Apr 9 2006, 10:07 PM Wrote:Nice looking mod.  Is it possible to do other colours or is that limited because of the basic design on the switches?

NefCanuck
[right][snapback]180189[/snapback][/right]

You can change them to what ever colour you can buy the LED's in. Red, Blue, Green, Yellow. You need to get about 15 3mm LED's in the colour of your chosing and maybe 5 610ohm resistors to do the headlight switch and all the power window switches. Next on my list is to do the power door lock switches.
[right][snapback]180191[/snapback][/right]

Ah, y'see the power door lock switches on the '05's don't light up at all (at least mine don't seem to do more than emit a sick green glow that's just about invisible...)

'course the fact that the cruise switches on the steering wheel are dark as pitch at night is a major PITA, but nothings gonna change that I fear...

NefCanuck
[right][snapback]180193[/snapback][/right]

I was reading about this earlier today. The door lock button has the LEDs in there already, but they aren't wired. Go figure.

There is a post on Focus Fanatics about how ti wire them up and get them working. Basically a couple of screwdrivers, a soldering iron, and a couple of feet worth of wire. I am going to do it tomorrow.

heres the link:
http://www.focusfanatics.com/forum/showthr...&threadid=26759

There is link in there with some pictures/etc.. and a couple of pages further, this is important for us (05+):
-----
Ok well i just got mine installed. At least on the 2005, the passenger side is different from the drivers side. You have to connect the (+) to the solid green wire and the (-) to the black wire.
-----