[ZX3TUNING]

Drivesthebeast,May 23 2006, 08:21 AM Wrote:Will the PW kit work with a FC 65mm TB, or does it come with a BBK TB? Also, when PW states the power readings on the dyno, they indicate that they are using a FS Stealth exhaust, and the PW kit to get 220Hp.  What I wanna know is, did they, or does ZX3tuning use 17" wheels when you dyno run your PW cars? Or use 15's, as I know this might generate larger figures.
Again, sorry for all the questions, but it's getting down to it that I wanna make a dent in my Line of credit for this thingy...lol

L8tr
[right][snapback]188923[/snapback][/right]

Depending on the year, it is not hard to use the FC tb with the PW kit
my car is a 00 with 00 FC TB on the PW kit and it is direct bolt on.
if you have a 02.5+ TB, you can use the FC TB but you will need to notch the cable bracket near the EGR boss and you will need to extend the the OE TPS harness to retain the use of the 02.5+ TPS sensor.
if not you have to back date your throttle cable(supplied with the PW kit) to 00 spec to use the BBK TB supplied with the kit or a 00 FC TB if you choose.

Our cars had 17" wheels on them when dyno'ed.
this will not generate larger numbers. the only way to change the numbers with such a thing would be with larger or smaller tire to reduce or increase the rolling diameter of the combo over stock. even if it were to generate different numbers, the difference would be minimal and not beyond the difference between how the car would put down numbers on different runs anyways.
there is more of a varriation between different dyno's than there would be between a smaller or larger tire.