11-11-2004, 11:14 PM
you need open up the cover around the steering column, unplug the multifunction switch and jumper two off the holes with a bit of wire.... i think its positions 9 and 10 but its been so long i'm not sure and you should definitely check on that.. i used some of the left over VAG wire that i used to make the harness from the lights to the stock connectors
you need to do this ASAP!
it REALLY helps visibility because switching to high beams not just turns on the high beam bulb it also swings a blocking plate that out of the way that is in place during low beams in the HID projector.. so the HID projector is pretty much just tossing out as much light as it can onto the road.. its an awesome setup..
you need to do this ASAP!
it REALLY helps visibility because switching to high beams not just turns on the high beam bulb it also swings a blocking plate that out of the way that is in place during low beams in the HID projector.. so the HID projector is pretty much just tossing out as much light as it can onto the road.. its an awesome setup..