Hi, Guest
06-27-2006, 03:24 AM
Yeah they do, the S2 skirts had a larger back area that angles up towards the back tires, that or down but regardless the 'height' along side the car on the back piece is much different when compared to the 'straight' look of the stock side skirts on a typical 2001 focus.
They will be very much different but I'm guessing the mounting will be exactly the same. Once you remove the stock ones, there will be a bunch of holes punched though the metal behind the skirts. There are clips on the back of the skirts that 'pressure fit' the skirt to the side. I'd recommend using some sort of two sided tape also (3M) to attach the skirts to the car also. I know the S2 skirts I had, where clipped and two side taped to the car though the factory. There's a screw or two in the wheel wells that hold it all in place.
Another think you 'can' do is take a bead of grey or black caulking and run it along the top of the skirt where it touches the car. This will protect the tape from getting wet and damaged from weather, etc and actually helps make the skirt look more attached to the side of the car. Also will help hide any strange gaps if you have any.
I know bodyshops do this for most lip kits they install so it's not 'my experimented trick' or anything, it's a pro trick they use time and time again.
Yeah I've seen several liquid grey and CD silver S2's but I've yet to see a red one in person.
So you know, you can order in those S2 badges if you want, I got them priced out by FORD PARTS at the dealership a little while ago, I think they were around $20CDN each or so, slightly less. So you know, the S2 decal was only on the sides of the car, not the back so you'd need to get two of them. I can send you a closeup picture of it if you want to get one custom made, which should be quite easy. Let me know.....
They will be very much different but I'm guessing the mounting will be exactly the same. Once you remove the stock ones, there will be a bunch of holes punched though the metal behind the skirts. There are clips on the back of the skirts that 'pressure fit' the skirt to the side. I'd recommend using some sort of two sided tape also (3M) to attach the skirts to the car also. I know the S2 skirts I had, where clipped and two side taped to the car though the factory. There's a screw or two in the wheel wells that hold it all in place.
Another think you 'can' do is take a bead of grey or black caulking and run it along the top of the skirt where it touches the car. This will protect the tape from getting wet and damaged from weather, etc and actually helps make the skirt look more attached to the side of the car. Also will help hide any strange gaps if you have any.
I know bodyshops do this for most lip kits they install so it's not 'my experimented trick' or anything, it's a pro trick they use time and time again.
Yeah I've seen several liquid grey and CD silver S2's but I've yet to see a red one in person.
So you know, you can order in those S2 badges if you want, I got them priced out by FORD PARTS at the dealership a little while ago, I think they were around $20CDN each or so, slightly less. So you know, the S2 decal was only on the sides of the car, not the back so you'd need to get two of them. I can send you a closeup picture of it if you want to get one custom made, which should be quite easy. Let me know.....