Hi, Guest
08-11-2006, 10:36 AM
(This post was last modified: 08-11-2006, 10:41 AM by Drivesthebeast.)
What are my plans?
Body:
->Teardown of the body, blast media the frame, replace the fenders, hood, and the fleetsides of the box all with new panels.
->replace the windsheild and rear glass, and have the proper original style of seals put on them again.
-> Replace the windows in the doors with the 1982+ style (single peice as the old ones just aren't available anymore)
-> Replace the floor panels in the floor of the cab, and then fiberglass them in to seal the whole floor, and then put heat sheild or dynamat down, followed by new carpeting.
-> TRex Billet Grille insert with chrome fairings, along with chrome headlamp surrounds
-> H-4 headlamp conversion (Cibie or Hella lense and Sylvania or Hella bulbs)
Engine:
->Teardown the engine, and rebuild it, having it balanced, replace engine bolts with ARP studs, etc.
->A mild grind street cam (Crane or equivalent)
->Polished Edelbrock dual-plane aluminum intake manifold (lose weight and gain power)
->Shorty SS headers (lower weight of cast iron stockers and better flow) and Gibson SS exhaust front to back (or a custom MBRP deisel exhaust modded for my application...hehehe....)
->Holley or Edelbrock 450-600 cfm 4bbl (truck has a rochester 4bbl, but should have had a carter)
->Remove the factory fan and it's pulley from the end of the crank and replace them with a flex-a-lite electric fan (to reduce weight and gain HP and TQ).
-> MSD Distributor with HEI cap and rotor, and Accel ignition wires.
-> Copper head and valve cover gaskets
-> Polished valve covers
-> K&N or equivalent air filter
-> Put a milder gearset in the diff so that highway speed isn't an issue
Chasis/Suspension:
-> Body-off and blast media the frame and it's major components
-> Powdercoat the frame in glossblack or other colour
-> Replace ALL of the bushings on the truck with polyeurathane (likely Energy Suspensions complete C10 kit)
-> Belltech or DJM Suspensions suspension kit (either lowering control arms or spindles, springs, shocks, swaybars, etc...all with poly bushings).
-> Upsize the rims to 17", with a 60 series tire fitted (still enough sidewall to be used as a truck, but look cool doing it).
-> Rear disc brake conversion with upsized rotors in the front (drop permitting)
Interior:
-> Dynamat the floor, doors, and rear wall
-> New carpet, headliner, dashpad, and door panel parts
-> Led Lightbulbs in the dash, and a Autometer Tach
-> Kenny Harrison OEM clone radio with iPod/mp3/cd aux and 4-ch preouts
-> 6 1/2" PowerAcoustik component sets in kickpods
-> Single 10" PowerAcoustik subwoofer in a sealed box
-> 2 x 2-ch OR 1x 4-ch PowerAcoustik amplifiers
Paint:
-> Upgrade to basecoat/clear paintjob...possible 2-tone setup like the 70 C10 they did on Overhaulin (navy blue with a cobalt metallic on the bottom, with a pinstripe and have a lighter metallic blue on the roof and pillars).
-> NO graphics or airbrushing as I like a clean, plain truck...
-> Paint the engine to match the roof and pillars, or the bottom of the truck
Figure that'll run the better part of $15,000 - $20,000, but that's still almost 1/3 - 1/2 the price of a new truck, and it'll be a custom, and should retain it's value nicely.
Body:
->Teardown of the body, blast media the frame, replace the fenders, hood, and the fleetsides of the box all with new panels.
->replace the windsheild and rear glass, and have the proper original style of seals put on them again.
-> Replace the windows in the doors with the 1982+ style (single peice as the old ones just aren't available anymore)
-> Replace the floor panels in the floor of the cab, and then fiberglass them in to seal the whole floor, and then put heat sheild or dynamat down, followed by new carpeting.
-> TRex Billet Grille insert with chrome fairings, along with chrome headlamp surrounds
-> H-4 headlamp conversion (Cibie or Hella lense and Sylvania or Hella bulbs)
Engine:
->Teardown the engine, and rebuild it, having it balanced, replace engine bolts with ARP studs, etc.
->A mild grind street cam (Crane or equivalent)
->Polished Edelbrock dual-plane aluminum intake manifold (lose weight and gain power)
->Shorty SS headers (lower weight of cast iron stockers and better flow) and Gibson SS exhaust front to back (or a custom MBRP deisel exhaust modded for my application...hehehe....)
->Holley or Edelbrock 450-600 cfm 4bbl (truck has a rochester 4bbl, but should have had a carter)
->Remove the factory fan and it's pulley from the end of the crank and replace them with a flex-a-lite electric fan (to reduce weight and gain HP and TQ).
-> MSD Distributor with HEI cap and rotor, and Accel ignition wires.
-> Copper head and valve cover gaskets
-> Polished valve covers
-> K&N or equivalent air filter
-> Put a milder gearset in the diff so that highway speed isn't an issue
Chasis/Suspension:
-> Body-off and blast media the frame and it's major components
-> Powdercoat the frame in glossblack or other colour
-> Replace ALL of the bushings on the truck with polyeurathane (likely Energy Suspensions complete C10 kit)
-> Belltech or DJM Suspensions suspension kit (either lowering control arms or spindles, springs, shocks, swaybars, etc...all with poly bushings).
-> Upsize the rims to 17", with a 60 series tire fitted (still enough sidewall to be used as a truck, but look cool doing it).
-> Rear disc brake conversion with upsized rotors in the front (drop permitting)
Interior:
-> Dynamat the floor, doors, and rear wall
-> New carpet, headliner, dashpad, and door panel parts
-> Led Lightbulbs in the dash, and a Autometer Tach
-> Kenny Harrison OEM clone radio with iPod/mp3/cd aux and 4-ch preouts
-> 6 1/2" PowerAcoustik component sets in kickpods
-> Single 10" PowerAcoustik subwoofer in a sealed box
-> 2 x 2-ch OR 1x 4-ch PowerAcoustik amplifiers
Paint:
-> Upgrade to basecoat/clear paintjob...possible 2-tone setup like the 70 C10 they did on Overhaulin (navy blue with a cobalt metallic on the bottom, with a pinstripe and have a lighter metallic blue on the roof and pillars).
-> NO graphics or airbrushing as I like a clean, plain truck...
-> Paint the engine to match the roof and pillars, or the bottom of the truck
Figure that'll run the better part of $15,000 - $20,000, but that's still almost 1/3 - 1/2 the price of a new truck, and it'll be a custom, and should retain it's value nicely.
Bleeding Ford Blue again...