Hi, Guest
10-17-2006, 04:07 AM
I've done this a fair bit, nothing you can't handle with a standard socket set, jacks and jack stands.
The o2 sensor tool is handy, checkout princess auto, I got a set there for 12 bucks I believe, well worth it, since its tough using a wrench.
For stuck bolts, If you have an angle grinder it should be enough. Just be carefull and it will do the trick. I used this a few times.
Best advice I can say, is same with anything, go over it all and make sure you have all tools, bolts, gaskets, gasket dressing. I would definetly recommend if it doesn't come with new bolts go and buy some new ones as it will make installation much easier.
The o2 sensor tool is handy, checkout princess auto, I got a set there for 12 bucks I believe, well worth it, since its tough using a wrench.
For stuck bolts, If you have an angle grinder it should be enough. Just be carefull and it will do the trick. I used this a few times.
Best advice I can say, is same with anything, go over it all and make sure you have all tools, bolts, gaskets, gasket dressing. I would definetly recommend if it doesn't come with new bolts go and buy some new ones as it will make installation much easier.