[lordkingod]

I can email you the firmware since its a pain to get your hands on unless your on xbins, and here are some links for you to research:

All your really doind is opening up the 360 and editing the firmware on the dvd-drive to tell it its ok to read burnt media. The basic procedure is this:

- Open up the 360 so you can access the dvd drive

- Attach a sata cable from you PC to the xbox (you need a motherboard with sata or a pci sata card)

- Boot up the pc to DOS prompt using a floppy disc, then copy the firmware off of the dvd drive to the floppy using a flash program (different depending on which dvd drive you have Toshiba or Hitachi)

- Boot your PC back up into windows, edit the firmware by plugging in some numbers (this process if for the most part automated)

- Then boot you pc back up to DOS using the same floppy re-flash your new edited firmware over the old firmare.

- Disconnect and reassemble the xbox 360 and your done

- Plays original and backed-up games like butter.... It even works with live.

Here are the best link I can find... and remember I can email you all the software necessary:

http://dwl.xbox-scene.com/tutorial/xbox360...tutorialv13.pdf


and for all the information you could ever need check out http://www.xbox-scene.com (specifically the Tutorials and Forums tabs on the header of the page)