02-28-2007, 03:07 AM
I used a hair dryer to take mine off...it got the letters and adheisive plyable enough to peel off almost entirely.
Then, I used a small amount of Acetone on a rag, and wiped off an area a few inches LARGER away from where the letters were, along with where they were.
3rdly, applied liberal amounts of paste wax (turtlewax platinum) to the entire hatch, and blended in the areas...after about 3 coats, you would never know there had been a badge at all on it.
That's how I did it.
L8tz
Then, I used a small amount of Acetone on a rag, and wiped off an area a few inches LARGER away from where the letters were, along with where they were.
3rdly, applied liberal amounts of paste wax (turtlewax platinum) to the entire hatch, and blended in the areas...after about 3 coats, you would never know there had been a badge at all on it.
That's how I did it.
L8tz
Bleeding Ford Blue again...