[Flofocus]

K, as some of you know I made custom grill. It doesnt have any signals in them, well now it does now, but this isnt my problem.

I bought some generic reverse signals from crappy tire for 2 bucks each (wanted to keep the clear thing going)...I cut the stock bulbs out so I could wire these bad boys up, but I know theres 3 wires on the stock bulbs and only two to this one.

I think the 3 wires on the stock unit are Black (GRND), Green, and Red. Not sure on exact color as it was pretty dark out in the driveway. I hooked up the black wire from the grill to the ground from the stock unit. Hook up the white wire from the grill to the red wire on the stock unit. Turn on the lights....nothing....switch the white to the green on both sides and voila, the grills lights are flashing.

BUT

They flick like crazy fast like one of them is going out, and they will only signal...meaning they wont stay but they will signal when the lights are on.

Any guesses how I could wire this up so it works properly?

:unsure: