05-21-2008, 08:53 AM
Super simple to replace... there's one host coming from the EGR tube and another from a vacuum port thing on the firewall - I have a 2002 so my DPFE was under the intake tube some are bolted to the firewall. Simply unplug the two rubber hoses from the bottom of the DPFE, unplug the wiring harness, and unbolt the DPFE (if necessary). Installation is the opposite of removal. To reset your ECU disconnect the negative terminal on your battery for around half and hour and you're golden.
Steve
1999 ZX2| MX3 H&Rs | S/R Tokicos | 21mm RSB | ES Bushings | HotShot CAI | Knocker mod | MSD Coil & 8.5mm Wires | SCT | B&M SS | SpeedHut Gauges | 16" BSA 303s
Coming soon: FR UDP | Pacesetter Shorty Header
Less is more... "Simplify and add lightness"
Click Here to E-mail Me!
Click here for my eBay auctions
1999 ZX2| MX3 H&Rs | S/R Tokicos | 21mm RSB | ES Bushings | HotShot CAI | Knocker mod | MSD Coil & 8.5mm Wires | SCT | B&M SS | SpeedHut Gauges | 16" BSA 303s
Coming soon: FR UDP | Pacesetter Shorty Header
Less is more... "Simplify and add lightness"
Click Here to E-mail Me!
Click here for my eBay auctions