[Zoom]

well I don't know what hood you are getting but VIS cf hoods come with the nozzle holes pre cut. I can vouch for that. My new hood came in on wedneday ;)

from my understanding the OLD VIS hoods came with NO holes, but too many ppl were screwing them up or cracking the gel coat so now they come pre-cut.



so this is the hood here is a legend you can look at and decipher what is what:

As you look at the picture think of it as you are standing in front of your car and looking at the hood dead on.

(Right side = Driver)

Red Line: rubber hose that the fluid travels through, you will notice the hose travels down the right side (driver side) black box...

Black box: These are the hood hinges. The red hose travels down this hinge and into your fender where it joins up with your washer fluid resevoir tank.

Blue T & L: these are the plastic fittings, the first "T" is so that fluid goes to the driver side nozzle and continues on to the "L" which is on the passenger side.

Green Dots: plastic clips holding the rubber tubes to the hood.

The empty circles are supposed to be the nozzles themselves.

The plastic clips are a b1tch to get off. Good luck, go slow, don't break any.