[Frost__2001]

castone,Mar 23 2010, 06:56 AM Wrote:There isn't really an easy way to get the brake and turn lights to operate properly.

The only sort of easy way is to run the turn signals from you front side or grill signals lights wiring all the way to the back (but that will just put an extra power load on your fronts).

The bulb holders and pigtails are different on the euro tails as to the North Americans, All I did was use a file and open up the inside of the euro tails to hold my factory sockets.



There is a way to do it from the wiring under the glove box, but I haven't tried yet (hopefully the next sunny weekend I will give this a try).
FF How Too
[right][snapback]303731[/snapback][/right]

Actually the easy way to have the 3 stage lights for your hatch is go to the wreakers and pull out from the plug the wiring harness from a sedan with the turn signels seprate already, all you have to do from there is test or mark each lead for what function dose what, I think I only had to cut the rear defog wire and resoder it. all the plugs are behind the rear passernger seat on the driver's side in the trunk.