Hi, Guest
10-07-2010, 05:11 AM
Checked the connections, all seem fine. There was a thread where someone had a similar problem
http://www.focuscanada.net/forum/showthr...ht=hid+kit
The hids work/stuck in the hi beam position. When I plug in a stock halo into the other bulb socket(the hid kit was only connected to one side of the headlight), the hid moves to the low beam when i pull the hi beam lever:S...tried interchanging the wires in the harness...but it still dint switch the beams. and if i take the halo from the other side out, the hids work/stuck in the hi beam position only- pulling the hi beam lever has no effect on the beam. really dunno what to do....
http://www.focuscanada.net/forum/showthr...ht=hid+kit
The hids work/stuck in the hi beam position. When I plug in a stock halo into the other bulb socket(the hid kit was only connected to one side of the headlight), the hid moves to the low beam when i pull the hi beam lever:S...tried interchanging the wires in the harness...but it still dint switch the beams. and if i take the halo from the other side out, the hids work/stuck in the hi beam position only- pulling the hi beam lever has no effect on the beam. really dunno what to do....