Hi, Guest
10-28-2011, 12:28 AM
i gotta disagree on this one, fuse is much better when you are going over 100 amp, when it gets shorted, it just break.
but with circuit breaker, it is good if you dont have absolute no problem blowing it,. but when it happens few times, inside of circuit breaker arc inside and weld pieces together.
but if you know you are not shorting to ground by using grommet and protection when running wire to engine bay, using circuit breaker is fine.
but with circuit breaker, it is good if you dont have absolute no problem blowing it,. but when it happens few times, inside of circuit breaker arc inside and weld pieces together.
but if you know you are not shorting to ground by using grommet and protection when running wire to engine bay, using circuit breaker is fine.
BLACKBOX(DASHCAM) | LED | HID | REMOTE STARTER + SECURITY | 12 VOLT ACCESSORIES | CAR ENTERTAINMENT | PERFORMANCE UPGRADE | MAINTENANCE REPAIR
![[Image: banner_468x60_zps1c433cb9.gif]](http://img.photobucket.com/albums/v452/konafocuswrc/motormaniac/banner_468x60_zps1c433cb9.gif)
info@motormaniac.ca | 905.508.3737
If you are calling after hours, please leave a pm or detailed voice mail and we will get back to you as soon as possible.
![[Image: banner_468x60_zps1c433cb9.gif]](http://smg.photobucket.com/user/konafocuswrc/media/motormaniac/banner_468x60_zps1c433cb9.gif.html)
info@motormaniac.ca | 905.508.3737
If you are calling after hours, please leave a pm or detailed voice mail and we will get back to you as soon as possible.