[muttsnutts]

(04-09-2012, 01:52 AM)JMCustoms Wrote: I dont know if you cut them off or not, but i lowered my car without taking any bolt from the rear control arm off, i had a hoist though, if you dint care about the stock springs ( mine we broken ), just cut the springs ( heat them in different places to weaken them ), then use a huge pry bar or beam, have a guy pulling down on the bar to lower the control arm, then the other person just takes the old spring out, and puts the new one in. Took us about 5-10 mi utes for both sides

Remember to unbolt the shock first

I have access to a hoist might give that a try Thanks for the info And just realised I cant spell Should be WHERE to buy Parts not WERE LOL!

---

(04-08-2012, 09:53 PM)02ztsian Wrote: Alan I would make the trek to Pick N Pull for replacements. You might get lucky and find two you can remove easily enough.
Also contact me-I have a spare bolt I can give you (#19 in this diagram)...

That is the one giving you grief.

Thanks Ian I will let you know going to try what JMC said