[microbunny]

whoo-hoo..

I just uninstalled my speakers yesterday afternoon...

there are 6 or 7 torx screws along the outter edge of the door panels..(undo them)

then there are 2 bolts behind the door handle...(pop off door handle cover and remove both bolts)

then remove the torx screw behing the tiny little circle inside the door handle ..(where your hand goes)

then pop off the black trim piece at the top (pull it out and then pull towards you along the window..they are held in with 3 clips)

next...grab the door handle and pull up on the door gently and separate it from the lip its in along the length of the window...

if you got power mirror/window etc...be cautious of the wires...

to make it easy pull the black door handle out and let it slip back out of the door trim..

the door can then be manouvered to rest upside while you muck with the speaker..

the speaker is held in by 4 bolts....remove them, remove stock speakers...

attatch new speakers, bolt 4 bolts back in place///

reverse everything i just said about the door removal and you should be good to go..


REpeat process as necessary per. amount of doors



How was that
'??